• Proceedings of the Safety Management and Science Conference
• /
• 2012.11a
• /
• pp.269-278
• /
• 2012

The purpose of VE (Value Engineering) activities is to come to an achievement of building necessary functions at the lowest possible cost. This study unfolds the co-VE activities which occurred between Gas Range and its partner company in the supply of Grill Body. The co-VE activity has accomplished the cost reduction of about 57 million through performing the function deployment of 12 parts and by devising the alternatives.

• Management Science and Financial Engineering
• /
• v.7 no.2
• /
• pp.13-30
• /
• 2001

This paper discusses a paradox in an Indefinite Quadratic transportation Problem. Here, the objective function is the product of two linear functions. A paradox arises when the transportation problem admits of a total cost which is lower than the optimum cost, by transporting larger quantities of goods over the same route. A sufficient condition for the existence of a paradox is established. Paradoxical Range of flow is obtained for any given flow in which the corresponding objective function value is less than the optimum value of the given transportation problem. It is illustrated with the help of a numerical example.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.5
• /
• pp.647-655
• /
• 2010

In this paper, a numerical study is carried out for super-pipe, flat plate and axisymmetric body flows to investigate a validity of using wall function and high $y_1^+$ in calculation of high Reynolds number flow. The velocity profiles in boundary layer agree well with the law of the wall. And it is found that the range of $y^+$��which validated the logarithmic law of the wall grows with increasing Reynolds number. From the result, an equation is suggested that can be used to estimate a maximum $y^+$ value of validity of the log law. And the slope(1/$\kappa$) of the log region of the numerical result is larger than that of experimental data. On the other hand, as $y_1^+$ is increasing, both the friction and the pressure resistances tend to increase finely. When using $y_1^+$ value beyond the range of log law, the surface shear stress shows a significant error and the pressure resistance increases rapidly. However, when using $y_1^+$ value in the range, the computational result is reasonable. From this study, the use of the wall function with high value of $y_1^+$ can be justified for a full scale Reynolds number ship flow.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.306-310
• /
• 2008

Fuzzy regression, a nonparametric method, can be quite useful in estimating the relationships among variables where the available data are very limited and imprecise. It can also serve as a sound methodology that can be applied to a variety of management and engineering problems where variables are interacting in an uncertain, qualitative, and fuzzy way. A close examination of the fuzzy regression algorithm reveals that the resulting possibility distribution of fuzzy parameters, which makes this technique attractive in a fuzzy environment, is dependent upon an h parameter value. The h value, which is between 0 and 1, is referred to as the degree of fit of the estimated fuzzy linear model to the given data, and is subjectively selected by a decision maker (DM) as an input to the model. The selection of a proper value of h is important in fuzzy regression, because it determines the range of the posibility ditributions of the fuzzy parameters. In this paper, we discuss the interdependent relationship among the h value, membership function shape, and the spreads of fuzzy parameters in fuzzy linear regression with fuzzy input-output using shape-preserving operations.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.8 no.4
• /
• pp.306-311
• /
• 2008

Fuzzy regression, a nonparametric method, can be quite useful in estimating the relationships among variables where the available data are very limited and imprecise. It can also serve as a sound methodology that can be applied to a variety of management and engineering problems where variables are interacting in an uncertain, qualitative, and fuzzy way. A close examination of the fuzzy regression algorithm reveals that the resulting possibility distribution of fuzzy parameters, which makes this technique attractive in a fuzzy environment, is dependent upon an h parameter value. The h value, which is between 0 and 1, is referred to as the degree of fit of the estimated fuzzy linear model to the given data, and is subjectively selected by a decision maker (DM) as an input to the model. The selection of a proper value of h is important in fuzzy regression, because it determines the range of the posibility ditributions of the fuzzy parameters. In this paper, we discuss the interdependent relationship among the h value, membership function shape, and the spreads of fuzzy parameters in fuzzy linear regression with fuzzy input-output using shape-preserving operations.

• Tunnel and Underground Space
• /
• v.28 no.1
• /
• pp.59-71
• /
• 2018

Since the generalized Hoek-Brown (GHB) function predicts the strength of the jointed rock mass in a systematic manner by use of GSI index, it is widely used in rock engineering practices. In this study, a series of 2D elasto-plastic FE analysis, which adopts the GHB criterion as a yield function, was carried out to investigate the radial convergence characteristics of circular tunnel excavated in the GHB rock mass. The effect of the plastic potential function on the elasto-plastic displacement was also examined. In the analysis, the wide range of both the $K(={\sigma}_h/{\sigma}_v)$ and GSI values are considered. For each K value, the variation of the ratio of sidewall displacement to roof displacement was calculated with varying GSI values and the obtained displacement patterns were analysed. The calculation results show that the displacement ratio significantly depends not only on the K value but also on the range of GSI value. In particular, for lower range of GSI value, the displacement ratio pattern calculated in the elasto-plastic regime is opposite to that predicted by the elasticity theory. In addition, the variation of the radial displacement ratio with GSI value for different types of plastic potential function showed similar trend.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.24-27
• /
• 2018

The performance measure of airborne radars is the range at which the cumulative probability of detection has some specified value, because the per-scan detection probability is an oscillatory function of the target range in airborne radars operating with the dynamic clutter environment. As a result, no one range, at which the per-scan detection probability has a given value, can give a meaningful description of the range performance. In this paper, we provide the equation to calculate the cumulative detection probability and show that the result of Monte Carlo simulation is same as the calculated value in a simple scenario. This verified Monte Carlo model will be used to evaluate the performance of airborne radars in various operating scenarios, at which the numerical calculation is difficult.

• Journal of Korea Multimedia Society
• /
• v.18 no.9
• /
• pp.1027-1038
• /
• 2015

For last several decades, the color correction methods have been proposed for HDR(high dynamic range) images. However, color distortion problems take place after correcting the colors such as halos, dominant color as well known. Accordingly, this article presents a novel approach in which the method consists of tone-mapping method and cone response function. In the proposed method, the tone mapping method is used to improve the contrast in the given HDR image based on chromatic and achromatic based on the CIEXYZ tristimulus value, expressed in c/m². The cone response function is used to deal with mismatch between corrected image and displayed image as well as to estimate various human visual effects based on the CMCAT2000 color appearance model. The experimental results show that the proposed method yields better performance of color correction over the conventional method in subjective and quantitative quality, and color reproduction.

• Physical Therapy Korea
• /
• v.20 no.3
• /
• pp.19-26
• /
• 2013

The smart-phone has become a necessity for most people. In this study, we determined that using a smart-phone for 20 minutes can cause increased neck and shoulder muscle activities and fatigue. Seventeen healthy male smart-phone users who attended Yonsei University played a smart-phone game for 20 minutes and changes in their bilateral cervical erector spinae and upper trapezius muscle activities and fatigue were measured. To assess muscle activities and fatigue, we used the following variables: the median frequency, the 50th percentile Amplitude probability distribution function (APDF) value (median load), and the discrepancy in the 90th percentile APDF value and the 10th percentile APDF value (APDF range). A paired t-test was used to compare pre-smart-phone-use status with post-smart-phone-use-status. The median frequency of the bilateral cervical erector spinae and the upper trapezius decreased significantly after 20 minutes of smart-phone use (p<.05). In addition, the 50th percentile APDF value of the bilateral cervical erector spinae and the right upper trapezius increased significantly (p<.05). The APDF range of the bilateral cervical erector spinae and the upper trapezius also increased significantly (p<.05). However, the 50th percentile APDF range of the left upper trapezius was not significantly different (p>.05). These findings suggest that using smart-phones for 20 minutes can induce muscle fatigue and increased neck and shoulder muscle activities.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.446-450
• /
• 2001

In this study, microstructural and electrical properties of (Pb)(La,Nd)$TiO_3$ cerramics were investigated as a function of CuO addition. Taking into consideration Tc of $325^{\circ}C$, dynamic range of 49dB( at the wafer form) and density of $7.71g/cm^{3}$, it can be concluded that the specimen S2 sintered at $1200^{\circ}C$ is the best for the resonator application, Dynamic characteristics of energy-trapped 20MHz SMD type resonator as a function of internal dot size variation were also investigated. Dynamic range characteristics showed the highest value of 60.72dB at S2-4(dot size 1.13mm).