• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.124-130
• /
• 2003

Zinc Oxide(ZnO) thin films on Si (100) substrate were deposited by RF magnetron sputter with changing sputtering conditions such as argon/oxygen gas ratios, RF power, and substrate temperature, chamber pressure and target-substrate distance. To analyze a crystallographic properties of the films, $\theta/2\theta$ mode X-ray diffraction, SEM, and AFM analyses. C-axis preferred orientation, resistivity. and surface roughness highly depended on $Ar/O_2$ gas ratios. The resistivity of ZnO thin films rapidly increased with increasing oxygen ratio and the resistivity value of $9{\times}10^7{\Omega}cm$ was obtained at a working pressure of 10 mTorr with $Ar/O_2$=50/50. The surface roughness was also improved with increasing oxygen ratio and the ZnO films deposited with $Ar/O_2$=50/50 showed the excellent roughness value of $28.7{\AA}$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.49-52
• /
• 2003

The role of gas ratio with the crystallization behavior and electrical properties in $Bi_{3.25}La_{0.75}Ti_3O_{12}$(BLT) thin films by rf magnetron sputtering method has not been precisely defined. In this work, the ferroelectric properties of these films with gas variation was investigated. BLT thin films were deposited on the Pt/Ti bottom electrode by rf magnetron sputtering method and then they were crystallized by rapid thermal annealing (RTA). The experiment showed that all BLT films indicated perovskite polycrystalline structure with preferred orientation (020) and (0012). And no pyrochlore phase was observed. The fabricated film annealed with $O_2$ of 15 sccm showed that value of leakage current was $9.67{\times}10^{-7}A/cm^2$ at 50kV /em, and the value of remanent polarization (2Pr=Pr+-Pr-) was $11.8{\mu}C/cm^2$. Therefore we induce access to memory device application by rf-magnetron sputtering method in this report.

• Journal of the Korean Society of Food Culture
• /
• v.34 no.3
• /
• pp.277-283
• /
• 2019

This study explore the market segmentation based on beer consumers' purchase motivation 1) to analyze beer consumers and markets more closely and 2) to demonstrate the characteristics of each market segment and contribute to marketing strategies with beer consumer segment. Using -administrated questionnaires asked questions recognizable beer purchase within 6 months by over 20-years-olds, this study 201 surveys online 22 days. The results as follows: beer consumers' purchase motivation consisted of three factors enhancement, social orientation, and value enhancement. Cluster analysis based on beer purchase showed that there were three groups motivation multi-motivation and motivation group based on average value of beer purchase motive factors and relative load per factor. demographic,beer drinking characteristics and group difference according to cluster gender and monthly average income, and beer drinking characteristics also significantly different by preferred beer, preferred beer type, occasion and drinking place.

• Structural Engineering and Mechanics
• /
• v.69 no.6
• /
• pp.667-676
• /
• 2019

Minimizing the stress concentration around hypotrochoid hole in finite metallic plates under in-plane loading is an important consideration in engineering design. In the analysis of finite metallic plate, the effective factors on stress distribution around holes include curvature radius of the corner of the hole, hole orientation, plate's aspect ratio, and hole size. This paper aims to investigate the impact of these factors on stress analysis of finite metallic plate with central hypotrochoid hole. To obtain the lowest value of stress around a hypotrochoid hole, a swarm intelligence optimization method named ant lion optimizer is used. In this study, with the hypothesis of plane stress circumstances, analytical solution of Muskhelishvili's complex variable method and conformal mapping is employed. The plate is taken into account to be finite, isotropic and linearly elastic. By applying suitable boundary conditions and least square boundary collocation technique, undefined coefficients of stress function are found. The results revealed that by choosing the above-mentioned factor correctly, the lowest value of stress would be obtained around the hole allowing to an increment in load-bearing capacity of the structure.

• Journal of Korean Academy of Nursing
• /
• v.17 no.1
• /
• pp.24-32
• /
• 1987

This study was designed to investigate the changes of nurses' role model, perceptions toward occupation, and self actualization value in terms of the phases of socialization process. Two hundred and sixty nine nurses working in clinical settings were randomly selected from 15 general hospitals despersed over Seoul and Kyungki province. Data were gathered by the standardized Perceptual Orientation Test, the Self-actualization Test, and Questionnaires on role models and phases of socialization process developed by the investigators from October 1985 to March 1986. The data were analysed by ANOVA and Pearson's Correlation Coefficient. The results were as follows: 1. The average time period required for the shift of phases of socialization process were; phase Ⅰ, role adjustment, took average 10 months of employment: Phase Ⅱ, interpersonal adjustment, 12 months: and Phase Ⅲ, role conflict, 15 months respectively. Conflict resolution, phase Ⅳ, began to take place 18 months of employment; and shifted to phase V, internalization and self-actualization at 25 months of employment. 2. Throughout 5 consecutive phase, the number of immediate superior nurse model was dominantly the highest among the role models. The number of head nurse role model increased at phase Ⅱ, phase Ⅲ, and phase Ⅳ. Respondents with school model in phase I tended to transfer to work model at phase Ⅱ. 3. The perceptions toward occupation were not significantly influenced by the Phases of socialization process. 4. The score of self-actualization value was not significantly influenced by the phases of socialization process. 5. In regard to perceptions toward occupation, nursing director model group showed significantly lower score in phase I (p<.01). 6. The comparison of self-actualization value between the 5 phases revealed significant difference in phase I: in particular among respondents with school model at p<.05. To conclude: 1. The phase Ⅲ of socialization process is the period of role conflict which occur at 15 months of employment, an6 conflict resolution, phase Ⅳ, begins at 18 months of employment on the average in clinical settings. 2. The immediate superior nurse and the head nurse are important role models for nurses all through their socialization process.

• Journal of Biosystems Engineering
• /
• v.40 no.3
• /
• pp.201-211
• /
• 2015

Purpose: Designing equipment for processing, sorting, and other post-harvest operations of agricultural products requires information about their physical properties. This study was conducted to investigate some of the mechanical and physical properties of Moringa oleifera L. pods and seeds. Methods: Properties such as the length, width, thickness, bulk density, porosity, mass, static coefficient of friction, and angle of repose were determined as a function of moisture content. Statistical data and force-deformation curves obtained at each loading orientation and moisture level were analyzed for bioyield point, bioyield strength, yield force, rupture point, and rupture strength using a testrometric machine. Result: The basic dimensions (length, width, and thickness) of moringa pods and seeds were found to increase linearly from 311.15 to 371.45 mm, 22.79 to 31.22 mm, and 22.24 to 29.88 mm, respectively, in the moisture range of 12 to 49.5% d.b. The coefficient of friction for both pods and seeds increased linearly with an increase in moisture content on all the surfaces used. The highest value was recorded on mild steel, with 0.581 for pods and 0.3533 for seeds, and the lowest on glass for pods, with a value of 0.501, and of 0.2933 for seeds on galvanized steel. The bioyield and rupture forces, bioyield and rupture energies, and deformation of the pods decreased with an increase in moisture content to a minimum value, then increased with further decrease within the moisture content range, while the yield force increased to a maximum value and then decreased as the moisture content increased. Conclusion: These results will help to determine the most suitable conditions for processing, transporting, and storing moringa pods, and to provide relevant data useful in designing handling and processing equipment for the crop.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.2
• /
• pp.129-146
• /
• 2014

In order to be successful in the very changeable competitive environment, the organization has to creative not only on the research and development but also on the Value Chain. Especially for the middle and small venture companies, they have to be creative on the Value Chain to get new profit. For the value innovation, kinds of factors which initiate the value innovation such as Meaningful Work, Risk Taking, Customer Orientation, Agile Decision-Making, Business Intelligence, Open Communication, Empowerment, Business Planning, Learning Organization and other similar factors should be included in the organization culture. By focusing on the above 9 factors with value innovation culture, the study practically analysis the effect of the Value Innovation Culture on the Individual Creativity, and the followings are the result of the study. Firstly, meaningful work, empowerment and risk taking are positively associated with expert knowledge which is one component of individual creativity. Secondly, open organization is confirmed to be positively associated with creative thinking skills. Thirdly, learning organization, empowerment and innovativeness are the factors which is positively associated with Intrinsic Motivation. These results have showed the employees' individual recognized Value Innovation Culture is confirmed to be helpful on inducing Individual Creativity.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.3
• /
• pp.97-113
• /
• 2023

In order to generalize the social entrepreneurship model with cooperation orientation and increase the possibility of using the model, this study developed a measurement tool and tested it with 389 executives of social enterprises. For the development of the measurement tool, preliminary measurement items were formed through review of previous studies, and a questionnaire was tentatively composed of 40 measurement items in five areas through an expert panel review of the measurement items. A total of 389 questionnaires were collected by conducting a questionnaire survey targeting Korean social enterprise managers, and exploratory and confirmatory factor analysis were conducted using 375 questionnaires that could be analyzed. Five factors for 24 items were derived through exploratory factor analysis and reliability analysis. Through a series of analysis processes including primary and secondary confirmatory factor analysis, the model fit of the newly constructed social entrepreneurship research model was confirmed, and the validity and reliability of the measurement tools were verified. As a result of this study, the model fit of the social entrepreneurship model(social value orientation; innovativeness; pro-activeness; risk-taking; cooperation orientation) is verified, thereby improving the theoretical explanatory power of social entrepreneurship research and at the same time providing the basis and basis for theoretical expansion of follow-up research. The study proved the possibility of generalizing the social entrepreneurship model with added cooperation orientation, and at the same time, the measurement tool used in this study was widely used as a tool to measure social entrepreneurship theoretically and practically. In addition, it was confirmed that the cooperation orientation is manifested in corporate decision-making and activity behaviors for resource mobilization and capacity building, opportunity and performance creation, social capital and network reinforcement, and governance establishment of social enterprises.

• Management & Information Systems Review
• /
• v.32 no.5
• /
• pp.135-155
• /
• 2013

Corporate primary goal has shifted from profit-orientation toward broader socially motivated perspectives, over the recent year. According to this phenomena, extensive research have been conducted to assess the empirical association between CSR and firm value. However, the results of previous studies are largely indeterminate which are attributed to the ignoring various indeterminate variables between CSR and firm value. Specifically, the purpose of this paper verifies the empirical association between CSR and firm value with considering capital constraint as core moderator variable by using structural equation modeling(SEM). Main results of this paper are as follows. We find that firms with better CSR performance face lower capital constraint and capital constraint is significantly related to firm value in negative direction, also. The result suggest that better CSR performance is associated with superior stakeholder engagement, in turn, CSR initiatives leads to firm value creation. Also, the capital constraint still remain positive to firm value even if capital constraint is considered moderator variables. Our findings implicated that CSR literatures should consider moderator variables, such as capital constraint, which could be affected firm value.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.224-225
• /
• 2009

Aluminium nitride thin film was deposited on Au electrode and Si substrate by radio frequency sputtering system. X-ray diffraction (XRD) was utilized to identify the AlN phase, and Atomic Force Microscope (AFM) was used to obtain the images of surface morphology and roughness value of AlN thin film. The result of XRD and AFM measurement showed that the AlN thin film has strong c-axs orientation and smooth surface. In order to investigate piezoelectric response and polarization properties along to the direction of electric field, PFM (Piezoresponse Force Microscope) system was used, and the images of piezoelectric response due to switching of polarization was observed by PFM.