• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.420-422
• /
• 1995

PVDF (polyvinylidene fluoride) has at least from known crystalline structure ( ; they are referred to as the $\alpha$, $\beta$, $\gamma$ and $\alpha_p$ phase or forms II, I, III and $IV_p$). In this study, the manufactured PVDF thin films through vapor deposition method had for II ( ; the substrate temperature at 30$^{\circ}C$). The dielectric behavior of poly(vinylidene fluoride) is affected by orientation and crystal modification. The very high value of the dielectric constant for high temperature conditioned film is believed to be due to the orientation effect. The loss peak caused by molecular motion of the molecules in crystalline regions.

• 대한수학회지
• /
• 제44권3호
• /
• pp.683-695
• /
• 2007

A tournament is an orientation of a complete graph, and in general a multipartite or c-partite tournament is an orientation of a complete c-partite graph. In a recent article, the authors proved that a regular c-partite tournament with $r{\geq}2$ vertices in each partite set contains a cycle with exactly r-1 vertices from each partite set, with exception of the case that c=4 and r=2. Here we will examine the existence of cycles with r-2 vertices from each partite set in regular multipartite tournaments where the r-2 vertices are chosen arbitrarily. Let D be a regular c-partite tournament and let $X{\subseteq}V(D)$ be an arbitrary set with exactly 2 vertices of each partite set. For all $c{\geq}4$ we will determine the minimal value g(c) such that D-X is Hamiltonian for every regular multipartite tournament with $r{\geq}g(c)$.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권4호
• /
• pp.358-365
• /
• 2005

In induction machine drive without a speed sensor, the estimation of the motor flux and speed often becomes deteriorated at low speeds with low back EMF. Our analysis shows that, in addition to the state resistance variation, the estimated value of field orientation angle is often corrupted by accumulative errors from the integration of voltage variables at motor terminals that have low signal/noise ratio at low frequencies. A repetitive loop path of integration in the feedback can amplify this type of error, thus speeding up the degradation process. The control system runs into information starvation due to the loss of correct field orientation. The machine's spiral vectors are controlled only in a reduced dimension in this situation. A novel control scheme is developed to improve the control performance of motor's current, torque and speed at low frequencies. The scheme gains a full-dimensional vector control and is less sensitive to the combined effect of the error sources at the low frequencies. Experimental tests demonstrate promising performances are achievable even below 0.5 Hz.

• Korean Journal of Geomatics
• /
• 제5권1호
• /
• pp.35-42
• /
• 2005

Precise geometric registration is required in multi-source data fusion process to obtain synergistic results successfully. However, most of the previous studies focus on the assumption of perfect registration or registration in a limited local area with intuitively derived simple geometric model. In this study, therefore, we developed a robust method for geometric registration based on a systematic model that is derived from the geometry associated with the data acquisition processes. The key concept of the proposed approach is to utilize smooth planar patches extracted from LIDAR data as control surfaces to adjust exterior orientation parameters of the aerial images. Registration of the simulated LIDAR data and aerial images was performed. The experimental results show that the RMS value of the geometric discrepancies between two data sets is decreased to less than ${\pm}0.30\;m$ after applying suggested registration method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2067-2069
• /
• 2002

The study of the vector control of the induction machine without speed sensor is going on and there are the adaptive performance method to use the flux observer. This study is to make the vector control without the speed sensor based on the flux oriented reference vector control theory. This paper proposes the new speed follow-up method to deduce the current value in the current sensor and the 2 order flux observer based on the observer theory and examine the possibility to realize the flux oriented vector control system using the simulation in this proposed method of this study.

• Macromolecular Research
• /
• 제9권3호
• /
• pp.164-170
• /
• 2001

Recently in order to describe the complex rheological behavior of polymer melts with long side branches like low density polyethylene, new constitutive equations called the pom-pom equations have been derived by McLeish and Larson on the basis of the reptation dynamics with simplified branch structure taken into account. In this study mathematical stability analysis under short and high frequency wave disturbances has been performed for the simplified differential version of these constitutive equations. It is proved that they are globally Hadamard stable except for the case of maximum constant backbone stretch (λ = q) with arm withdrawal s$\_$c/ neglected, as long as the orientation tensor remains positive definite or the smooth strain history in the now is previously given. However this model is dissipative unstable, since the steady shear How curves exhibit non-monotonic dependence on shear rate. This type of instability corresponds to the nonlinear instability in simple shear flow under finite amplitude disturbances. Additionally in the flow regime of creep shear flow where the applied constant shear stress exceeds the maximum achievable value in the steady now curves, the constitutive equations will possibly violate the positive definiteness of the orientation tensor and thus become Hadamard unstable.

• 한국세라믹학회지
• /
• 제43권9호
• /
• pp.527-531
• /
• 2006

In order to study the influence of post-annealing treatment on the frequency characteristics of the Li doped ZnO(Li:ZnO) FBAR(Film Bulk Acoustic Resonator) device, we investigated the material and electrical properties of Li:ZnO films in the annealing temperature range from 300 to $500^{\circ}C$. In our samples, as annealing temperature was increased, Li:ZnO films showed the improvement of high c-axis orientation and resistance value with relieved stress and low surface roughness. In addition to, the return loss in the frequency property of fabricated FBAR was improved by annealing treatment from 24.9 to 29.8dB. From experimental results, the optimum post-annealing temperature for FBAR is $500^{\circ}C$ and it can obtain excellent Li:ZnO FBAR performance with stronger c-axis orientation, smoother surface, relieved stress, and lower loss factor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.151-154
• /
• 1999

ZnO thin films on glass substrate were deposited by RF magnetron reactive sputter with various argodoxygen gas ratios and substrate temperatures. Crystallinities, surface morphologies, chemical compositions, and electrical properties of the films were investigated by XRD, SEM, XPS and electrometer(keith1ey 617). All films showed a strong prefered orientation along the c-axis on glass substrate, and the chemical stoichiometry was obtained at Ar/$O_2$=50/50. The propagation velocity of ZnO SAW filter was about 2, 590 dsec and insertion loss was a minimum value of about -21dB.

• 패션비즈니스
• /
• 제21권4호
• /
• pp.73-89
• /
• 2017

This research aimed to identify the characteristics of outdoor apparel market for new seniors. To achieve this goal, influence of new seniors' lifestyle and apparel purchase criteria of design preferences of outdoor apparel products were investigated. An online-survey was conducted targeting fifties who have bought outdoor apparel within one year. The collected data were carried out for factor analysis, independent sample T-test, and regression analysis by using SPSS 22.0. Results showed that new seniors' lifestyles were composed of appearance-orientation, well-being diet, well-being exercise, self-development, and challenge-orientation. Purchase criteria of outdoor apparels were factored out as practical, aesthetic, and social. Appearance -orientation and self-development affect aesthetic and social factors. Well-being diet influences all factors of purchase criteria. Challenge -orientation has effect only on social factor. Women favored round-and V-neckline more than men did as well as preferred half and 3/4 long for sleeve. Customers who value practical purchase criteria preferred half-sleeve, zipper, and button-closure designs. In contrast, customers who have aesthetic purchase criteria like round/V-neckline and cap sleeve. Social factor affected high neckline and vivid-tone color preference significantly. As outdoor design for new senior it is critical to introduce differentiation of outdoor brand with various designs combining functionalities of outdoor activities and style looking young and dandy, which is highlighted as trendy and casual, over current outdoor apparels' unified design.

• Journal of Korea Trade
• /
• 제23권7호
• /
• pp.156-172
• /
• 2019

Purpose - Without question, globalization has presented different opportunities to entrepreneurs seeking to expand their companies in foreign markets. The aim of this study is to examine the relationship between entrepreneurial orientation, entrepreneurial activity, information internalization, and product differentiation in export oriented firms. As such, entrepreneurial activities are divided into exploitative and exploratory opportunities. These opportunities are crucial in improving firms' performance. Design/methodology - A structural questionnaire was developed using 21 factors/indicators from previous researches. The subjects of this study were recruited using convenience sampling in export SMEs in the Seoul Metropolitan Area. Data were collected through visits or e-mails from the export managers, executives, and CEOs of export SMEs in advance. 321 questionnaires were collected over a period of one month. 316 questionnaires were used in the final analysis. Findings - First, International Entrepreneurial-orientation (IE) has a positive effect on the exploration and exploitation of business opportunities. Second, the exploration and exploitation of business opportunities have a positive impact on information internalization. Third, information internalization has a significant effect on product differentiation and plays a mediating role in seeking opportunities, utilizing opportunities, and differentiating products. Originality/value - This study contributes to the development of academic discussions by explaining existing research gaps. First, there is currently a lack of research focusing precisely on the product differentiation capability of SMEs in manufacturing field in terms of IE. To bridge these gaps, we examined the entrepreneurial factors impact on product differentiation and tries to expand the discussion about the internationalization of SMEs, which were mainly focused on IT companies, and manufacturing companies. Second, there is no intuitive explanation regarding international entrepreneurial activity in terms of exploration and exploitation within existing. In this study, international entrepreneurship activities were classified in terms of exploration and exploitation.