• 제목/요약/키워드: Value Improvement

검색결과 3,975건 처리시간 0.035초

노인복지시설의 활성화 방안에 관한 연구 (A Study on the Activation of Senior Welfare Facilities)

  • 조우홍
    • 한국컴퓨터정보학회논문지
    • /
    • 제13권7호
    • /
    • pp.231-237
    • /
    • 2008
  • 본 연구는 현대 산업사회에서 노인인구의 고령화와 가족구조가 변화함으로써 전통적인 가족기능의 약화, 여성의 경제활동, 가치관의 변화, 노인의 위치와 역할 등의 문제를 유발시키며 그로 인한 노인부양을 기대하기는 더욱 어려워져 가고 이에 많은 노인복지시설이 필요한 실정이다. 이러한 측면에서 노인복지시설의 활성화를 위해서는 다음과 같은 방안이 요구된다. 첫째, 시설의 확충은 국가정책차원의 지원이 이뤄져야 한다. 둘째, 지역의 관련 기관간 지역 네트워크를 구축하여 주민들에게 지역특성에 맞는 다양한 프로그램을 개발하여 제공되어야 한다. 셋째. 노인복지시설 환경의 개선이 이뤄져야 한다. 넷째, 후원자 개발을 통한 고객특성에 맞는 마케팅 전략이 필요하다. 다섯째, 노인복지시설 전문 종사자에 대한 처우 개선과 적정한 전문 인력의 증원이 이뤄져야 한다.

  • PDF

환경물류의 주요 실태와 우리나라에서의 확대 전략에 관한 연구 (A Study on the main Status of Environment Logistics and Expansion Strategy in Korea)

  • 김홍섭
    • 한국항만경제학회지
    • /
    • 제25권4호
    • /
    • pp.251-280
    • /
    • 2009
  • 환경의 가치는 매우 높고 중요해서 누구도 가치를 정확하게 평가할 수 없다. 물류영역에서 환경보호는 매우 중요하며 이 나라와 국민의 현재와 미래에 대한 민감한 주제이다. 환경물류는 환경물류와 유사하게 쓰이는 데 자연과 환경의 보호를 의미하며, 현재의 환경을 파괴하거나 악화시키는 모든 유형의 요인과 활동들을 줄이는 것을 의미한다. 이것은 또한 자연의 보전과 지속가능한 개발을 내포한다. 환경물류는 자연자원을 절약하는 것을 목표로 하며 모든 유형의 자원의 재활용을 권장하며, 환경 친화적 대체재의 활용을 증대시키려는 것을 지향한다. 본고에서는 환경물류의 개념과 특성을 요약, 서술하였다. 그리고 주요 선행연구들을 조사, 검토하였다. 일본, 홍콩, 미국 등 주요국과 그리고 필립스의 사례 등에서 도입되고 적용하고 있는 중요한 사례와 경험들이 요약되고 분석되었다. 이런 사례와 분석들을 통해 본 논문에서는 국가, 기업, 개인(소비자)의 3차원에서 한경물류를 개선할 수 있는 대안과 대응전략들이 제안되었다. 그리고 환경물류의 향상을 위한 전략모델이 제안되었으며, 논문의 한계와 향후 연구방향이 설명되었다.

  • PDF

An update of preimplantation genetic diagnosis in gene diseases, chromosomal translocation, and aneuploidy screening

  • Chang, Li-Jung;Chen, Shee-Uan;Tsai, Yi-Yi;Hung, Chia-Cheng;Fang, Mei-Ya;Su, Yi-Ning;Yang, Yu-Shih
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제38권3호
    • /
    • pp.126-134
    • /
    • 2011
  • Preimplantation genetic diagnosis (PGD) is gradually widely used in prevention of gene diseases and chromosomal abnormalities. Much improvement has been achieved in biopsy technique and molecular diagnosis. Blastocyst biopsy can increase diagnostic accuracy and reduce allele dropout. It is cost-effective and currently plays an important role. Whole genome amplification permits subsequent individual detection of multiple gene loci and screening all 23 pairs of chromosomes. For PGD of chromosomal translocation, fluorescence $in-situ$ hybridization (FISH) is traditionally used, but with technical difficulty. Array comparative genomic hybridization (CGH) can detect translocation and 23 pairs of chromosomes that may replace FISH. Single nucleotide polymorphisms array with haplotyping can further distinguish between normal chromosomes and balanced translocation. PGD may shorten time to conceive and reduce miscarriage for patients with chromosomal translocation. PGD has a potential value for mitochondrial diseases. Preimplantation genetic haplotyping has been applied for unknown mutation sites of single gene disease. Preimplantation genetic screening (PGS) using limited FISH probes in the cleavage-stage embryo did not increase live birth rates for patients with advanced maternal age, unexplained recurrent abortions, and repeated implantation failure. Polar body and blastocyst biopsy may circumvent the problem of mosaicism. PGS using blastocyst biopsy and array CGH is encouraging and merit further studies. Cryopreservation of biopsied blastocysts instead of fresh transfer permits sufficient time for transportation and genetic analysis. Cryopreservation of embryos may avoid ovarian hyperstimulation syndrome and possible suboptimal endometrium.

탄소섬유 복합재 및 두께 축소율을 이용한 풍력 블레이드 스파캡 경량화 설계 (A Lightweight Design of the Spar cap of Wind Turbine Blades with Carbon Fiber Composite and Ply Reduction Ratio)

  • 김도원;정규;임재혁;임준우;유병민;이길성
    • 항공우주시스템공학회지
    • /
    • 제12권2호
    • /
    • pp.66-75
    • /
    • 2018
  • 본 논문에서는 2MW급 풍력 블레이드의 스파캡을 탄소복합재료, 두께축소율(PRR) 및 상쇄연구(Trade-off study)를 이용해서 경량화 설계를 수행했다. 블레이드 스파캡은 블레이드의 기계적 건전성을 결정하는 가장 핵심적인 요소이다. 가벼우면서도 기계적 신뢰성을 확보할 수 있는 블레이드 스파캡의 형상을 도출하기 위해 주어진 설계하중으로 스파캡의 두께를 변화시키면서 반복적인 구조해석을 실시한다. 파손여부를 판정하기 위해서 Tsai-Wu 및 Puck 파손이론을 사용하였으며, 그 결과 GFRP 복합재료보다 CFRP 복합재료가 동일한 조건에서 약 30% 무게를 경량화 할 수 있었다. 해석 결과를 바탕으로 복합재료 적층두께의 최적값을 도출하여 구조적 성능 향상 및 경량화 된 설계 결과를 제시한다.

The Effects of Natural Material Extracted from Rice Bran on Skin in vivo

  • Zhoh, Choon-Koo;Han, Chang-Giu;Hong, Se-Heum;Takuo Tsuno
    • 대한화장품학회:학술대회논문집
    • /
    • 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
    • /
    • pp.253-267
    • /
    • 2003
  • Inositol and phytic acic extracted from rice bran were investigated for applying cosmetics. Skin lotions containing 0∼3.0wt% inositol and 0∼1.5wt% phytic acid were applied respectively, to the arm skins of 45 Asian women 20'-40's for 7 weeks. Improvement on moisture was evaluated. In addition, improvements on sebum, elasticity, and wrinkle were examined after applying placebo, Inositol and phytic acid-containing skin lotions for face, respectively. For 1.0 wt% inositol resulted in 19% increase of moisture. The wrinkle reduction and elasticity improved 12.4% and 17.0% on average, respectively. Applying 0.5wt% phytic acid resulted in 71.6% increase the moisture. Improvements on wrinkle and elasticity were 15.9% and 21.9% respectively. Applying inositol or phytic acid regardless of dry or oily, resulted in sebum value recovery to that of the normal skin after 2- 4 weeks. Inositol is inferior to phytic acid in improvenients of the skin, and phytic acid is not suitable to sensitive skin. So 0-0.5wt% of phytic acid were added to 1.0wt% inositol and similar experiments were carried out. In case of added 0.1wt% phytic acid, moisture increased 63.8% approximately. Improvements on elasticity and reduction on wrinkle were 17.2% and 17.4%, respectively. Both skin types were turned to normal skin type after 2 weeks. It could improve the skin condition when used inositol added phytic acid. The optimized concentration of phytic acid was 0.10wt% with 1.0wt% of inositol for synergic effect.

  • PDF

3차원 인체치수 조사 자료의 품질 개선을 위한 연구 (A Study for Quality Improvement of Three-dimensional Body Measurement Data)

  • 박선미;남윤자;박진우
    • 대한인간공학회지
    • /
    • 제28권4호
    • /
    • pp.117-124
    • /
    • 2009
  • To inspect the quality of data collected from a large-scale body measurement and investigation project, it is necessary to establish a proper data editing process. The three-dimensional body measurement may have measuring errors caused from measurer's proficiency or changes in the subject's posture. And it may also have errors caused in the process of algorithm expressing the information obtained from the three-dimensional scanner into numerical values, and in the course of data-processing dealing with numerous data for individuals. When those errors are found, the quality of the measured data is deteriorated, and they consequently reduce the quality of statistics which was conducted on the basis of it. Therefore this study intends to suggest a new way to improve the quality of the data collected from the three-dimensional body measurement by proposing a working procedure identifying data errors and correcting them from the whole data processing procedure-collecting, processing, and analyzing- of the 2004 Size Korea Three-dimensional Body Measurement Project. This study was carried out into three stages: Firstly, we detected erroneous data by examining of logical relations among variables under each edit rule. Secondly, we detected suspicious data through independent examination of individual variable value by sex and age. Finally, we examined scatter-plot matrix of many variables to consider the relationships among them. This simple graphical tool helps us to find out whether some suspicious data exist in the data set or not. As a result of this study, we detected some erroneous data included in the raw data. We figured out that the main errors are not because of the system errors that the three-dimensional body measurement system has but because of the subject's original three-dimensional shape data. Therefore by correcting some erroneous data, we have enhanced data quality.

교사의 직무수행을 위한 ICT활용능력 자기평가도구 개발 및 적용 (The Development and Application of Self-evaluation Tool for the Abilities of ICT Application of Teacher to perform teacher's functions)

  • 박선주;강아영;박지은;마대성;김철;김정랑
    • 정보교육학회논문지
    • /
    • 제10권3호
    • /
    • pp.299-306
    • /
    • 2006
  • 교육인적자원부는 ICT 활용 교육을 주도해 나가는데 가장 중심이 되는 교사의 ICT 활용 능력을 신장시키기 위해 다양한 방안들을 수립하여 추진하고 있다. 그러나 현재 시행되고 있는 교사의 ICT 활용능력 신장에 관한 대부분의 노력들은 ICT를 직무활동에 효과적으로 활용할 수 있는 능력보다는 기술소양 능력에 중점을 두고 있다. 그러므로 본 논문에서는 교사의 직무활동을 분석하고, 국내외 교사 ICT 활용능력 평가도구를 비교 분석하여 교사의 ICT활용능력 자기평가 도구를 개발하였다. 또한, 개발된 웹 기반 교사의 ICT 활용능력 자기평가도구를 광주와 전남 지역의 교사를 대상으로 적용하여 성별, 직위별, 지역별, 교육경력별 ICT 활용능력 수준 등을 조사분석하였다.

  • PDF

이동통신망에서의 모바일 컨텐츠 서버 통신을 위한 최적의 TCP 세그먼트 길이 (Optimal TCP Segment Size for Mobile Contents Server Access over Wireless Links of Cellular Networks)

  • 이구연;정충교;김화종;이용
    • 대한전자공학회논문지TC
    • /
    • 제43권12호
    • /
    • pp.31-41
    • /
    • 2006
  • 이동통신망을 통한 인터넷 접속은 제한된 대역폭 및 무선 접속 링크에서의 높은 bit 오류율로 인하여 병목현상을 야기시킨다. 이러한 병목현상에 따른 TCP 통신의 성능저하를 막기 위해 TCP 연결의 여러 파라미터를 최적화시키는 작업은 필수적이다. 본 논문에서는 모바일 컨텐츠 서버와의 통신시에 무선링크의 이용 효율을 최대화시키기 위한 최적의 TCP 세그먼트 길이에 대한 알고리즘을 제시한다. 또한 본 논문에서는 제시된 알고리즘에 대한 몇 가지의 예를 제시한다. 제시된 예에서 보듯이 TCP 세그먼트 길이는 TCP 윈도우 사이즈가 어느 임계값 이상이 되면 더 이상 변하지 않고 고정된 값을 갖음을 알 수 있다. 본 논문의 결과를 이용하면, 단순히 TCP 세그먼트 길이만을 조정하므로서, 모바일 컨텐츠 서버 접속시에, 값비싼 무선 링크의 이용 효율을 최대화시킬 수 있을 것이다.

저항-커패시턴스 시정수 회로를 이용하여 지터 특성을 개선한 위상고정루프 (A Jitter Characteristic Improved PLL with RC Time Constant Circuit)

  • 안성진;최영식
    • 전자공학회논문지
    • /
    • 제54권2호
    • /
    • pp.133-138
    • /
    • 2017
  • 본 논문은 RC 시정수 회로를 이용하여 지터 특성을 개선한 위상고정루프의 구조를 제안하였다. RC 시정수 회로에서는 루프 필터 전압이 작은 시정수와 큰 시정수 값을 가지는 회로를 통과하여 비교기로 전달된다. 작은 시정수 값을 가지는 회로를 지나는 신호는 거의 루프 필터 출력 전압과 같은 값을 가진다. 큰 시정수 값을 가지는 회로를 지나는 신호는 루프 필터 출력전압의 평균값을 가지며, 비교기회로에서 기준 신호 역할을 한다. 비교기의 출력 신호는 루프 필터에 전류를 공급하는 보조 전하펌프를 제어한다. 루프 필터 출력 전압이 상승하면 보조 전하펌프는 루프 필터에서 전류를 방전시켜 루프 필터 출력 전압이 하강하게 하고, 또는 루프 필터 출력 전압이 하강하면 보조 전하펌프는 루프 필터에서 전류를 충전시켜 루프 필터 출력 전압이 상승하게 한다. 이런 부궤환 루프는 필터 출력 전압 변동 폭을 줄여서 지터 크기를 감소시켜준다.

사전충전모드를 통한 SCALDO 레귤레이터의 초기 동작특성 개선 (Improvement of Initial Operating Characteristics of SCALDO Regulator by Pre-charger)

  • 권오순;손준배;송종규
    • 전기전자학회논문지
    • /
    • 제20권3호
    • /
    • pp.265-272
    • /
    • 2016
  • SCALDO(Supercapacitor Assisted LDO) 레귤레이터는 기존 LDO(Low Drop-out) 레귤레이터(이하 LDO)의 낮은 효율을 개선하기 위해 연구되고 있는 회로로서, 회로의 입력단과 LDO사이에 슈퍼커패시터를 부착하여 입력과 출력 전압의 차이에 의해 발생하는 불필요한 전력손실을 재사용함으로써 LDO의 효율을 향상시킬 수 있다. 하지만 SCALDO 레귤레이터는 현재 연구 중에 있는 회로로 몇 가지 개선되어야 할 사항들이 남아있다. 그 중 한 가지는 회로의 최초동작 시 LDO에 인가되는 과전압문제이다. 회로의 최초동작 시 슈퍼커패시터가 완전히 방전되어 있어 충전모드 시 입력과 슈퍼커패시터, LDO가 직렬로 연결되는 SCALDO 레귤레이터 특성 상 입력전압이 LDO에 짧은 시간동안 그대로 인가되는데, 입력전압이 출력전압보다 최소 2배 이상 크기 때문에 이는 LDO에 상당히 큰 부담이 될 수 있다. 본 논문에서는 이러한 과전압 문제를 해소하기 위해 회로 동작 전 슈퍼커패시터를 충전시킬 수 있는 사전충전부가 포함된 새로운 SCALDO 레귤레이터를 제안하였으며, 실험을 통해 동작 초기 LDO에 인가되는 과전압이 상당부분 감소됨을 확인하였다.