• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.185.2-185.2
• /
• 2014

We have studied the atomic and electronic structure of graphene nanoribbons (GNRs) on a hexagonal boron nitride (h-BN) sheet with intercalated atoms using first-principles calculations. The h-BN sheet is an insulator with the band gap about 6 eV and then it may a good candidate as a supporting dielectric substrate for graphene-based nanodevices. Especially, the h-BN sheet has the similar bond structure as graphene with a slightly longer lattice constant. For the computation, we use the Vienna ab initio simulation package (VASP). The generalized gradient approximation (GGA) in the form of the PBE-type parameterization is employed. The ions are described via the projector augmented wave potentials, and the cutoff energy for the plane-wave basis is set to 400 eV. To include weak van der Waals (vdW) interactions, we adopt the Grimme's DFT-D2 vdW correction based on a semi-empirical GGA-type theory. Our calculations reveal that the localized states appear at the zigzag edge of the GNR on the h-BN sheet due to the flat band of the zigzag edge at the Fermi level and the localized states rapidly decay into the bulk. The open-edged graphene with a large corrugation allows some space between graphene and h-BN sheet. Therefore, atoms or molecules can be intercalated between them. We have considered various types of atoms for intercalation. The atoms are initially placed at the edge of the GNR or inserted in between GNR and h-BN sheet to find the effect of intercalated atoms on the atomic and electronic structure of graphene. We find that the impurity atoms at the edge of GNR are more stable than in between GNR and h-BN sheet for all cases considered. The nickel atom has the lowest energy difference of ~0.2 eV, which means that it is relatively easy to intercalate the Ni atom in this structure. Finally, the magnetic properties of intercalated atoms between GNR and h-BN sheet are investigated.

• 한국진공학회지
• /
• 제17권3호
• /
• pp.189-194
• /
• 2008

플라즈마 진단법 중 손쉽고 구동이 용이한 장점으로 인해 범용 플라즈마 진단 장치로 사용되는 랑뮤어 (Langmuir) 탐침법은 탐침이 직접 플라즈마 내에 삽입됨으로써 플라즈마를 간섭하기 때문에 플라즈마 고유의 특성을 변형시키는 약점이 있다. 본 연구에서는 대기압 아르곤 자유 연소 아크 (free-burning arc)에 삽입된 랑뮤어 탐침에 의한 교란 영향을 고찰하기 위하여 탐침 유무에 따른 열플라즈마 상태를 수치계산 하였고, 온도장과 속도장이 왜곡된 정도를 비교 분석하였다. 열플라즈마를 모델링하기 위하여 열유동장과 전자기장에 관한 두 종류의 지배방정식을 상용 CFD 프로그램과 자체 제작한 서브루틴을 이용하여 연계 계산하였다. 삽입된 탐침에 의해 열플라즈마 온도장은 탐침의 앞뒤에서 모두 플라즈마 축의 수직 방향으로 큰 변화를 나타내는 열적 교란이 발생되었다. 속도장에서는 탐침 선단의 정체 영역과 후단 후류 영역에서 유동 교란이 발생되었으며, 삽입 된 탐침의 영향이 국부적인 것이 아닌 플라즈마 유동장 대부분 영역에 영향을 미침을 확인할 수 있었다. 따라서 탐침법의 신뢰성을 높이기 위해서는 탐침 삽입에 의한 플라즈마의 열유체역학적 교란을 고려해야 한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.225-225
• /
• 2011

The dielectric and optical properties of GaInZnO (GIZO), HfInZnO (HIZO) and InZnO (IZO) thin films on glass by RF magnetron sputtering method were investiged using reflection electron energy loss spectroscopy (REELS). The band gap was estimated from the onset values of REELS spectra. The band gaps of GIZO, HIZO and IZO thin films are 3.1 eV, 3.5 eV and 3.0 eV, respectively, Hf and Ga incorporated into IZO results in an increase in the energy band gap of IZO by 0.5 eV and 0.1 eV. The dielectric functions were determined by comparing the effective cross section determined from experimental REELS with a rigorous model calculation based on the dielectric response theory, using available software package, good agreement between the experimental and fitting results gives confidence in the accuracy of the determined dielectric function. The main peak of Energy Loss Function (ELF) obtained from IZO shows at 18.42 eV, which shifted to 19.43 eV and 18.15 eV for GIZO and HIZO respectively, because indicates the corporation of cation Ga and Hf in the composition. The optical properties represented by the dielectric function e, the refractive index n, the extinction coefficient k, and the transmission coefficient, T of HIZO and IZO thin films were determined from a quantitative analysis of REELS. The transmission coefficient was increased to 93% and decreased to 87% in the visible region with the incorporation of Hf and Ga in the IZO compound.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.158-158
• /
• 2012

A new kind of organic-inorganic hybrid polymer, poly(tetraphenyl)silole siloxane (PSS), was invented and synthesized for realization of its unique charge trap properties. The organic portions consisting of (tetraphenyl)silole rings are responsible for electron trapping owing to their low-lying LUMO, while the Si-O-Si inorganic linkages of high HOMO-LUMO gap provide the intrachain energy barrier for controlling electron transport. Such an alternation of the organic and inorganic moieties in a polymer may give an interesting quantum well electronic structure in a molecule. The PSS thin film was fabricated by spin-coating of the PSS solution in THF organic solvent onto Si-wafer substrates and curing. The electron trapping of the PSS thin films was confirmed by the capacitance-voltage (C-V) measurements performed within the metal-insulator-semiconductor (MIS) device structure. And the quantum well electronic structure of the PSS thin film, which was thought to be the origin of the electron trapping, was investigated by a combination of theoretical and experimental methods: density functional theory (DFT) calculations in Gaussian03 package and spectroscopic techniques such as near edge X-ray absorption fine structure spectroscopy (NEXAFS) and photoemission spectroscopy (PES). The electron trapping properties of the PSS thin film of quantum well structure are closely related to intra- and inter-polymer chain electron transports. Among them, the intra-chain electron transport was theoretically studied using the Atomistix Toolkit (ATK) software based on the non-equilibrium Green's function (NEGF) method in conjunction with the DFT.

• 한국항공우주학회지
• /
• 제42권9호
• /
• pp.789-794
• /
• 2014

정지궤도급 차세대 통신위성에 탑재될 디지털신호처리기에는 디지털 고속통신을 위한 FPGA가 사용된다. 적용된 FPGA는 높은 열소산량을 가지고 있으며, 이로 인한 접합온도의 상승은 부하경감 요구조건을 만족하기 어렵고 장비의 수명과 신뢰도 저하의 주요 원인이다. 지상과는 달리 우주환경에서의 전장품의 열제어는 대부분 열전도를 통하여 이루어지고 있다. CCGA 또는 BGA 형태의 FPGA는 인쇄회로기판에 장착되지만, 인쇄회로기판의 열전도율은 FPGA의 열제어에 효율적이지 못하다. FPGA의 열제어를 위하여 부품 리드와 하우징을 직접 연결하는 히트싱크를 제작하였으며, 우주인증레벨의 열진공시험을 통하여 그 성능을 확인하였다. 높은 전력소모량을 가진 FPGA는 우주환경에 적용하기 어려웠으나, 히트싱크를 적용함으로써 부하경감 온도 마진을 확보하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.381-381
• /
• 2010

$(ZrO_2)_{0.66}(HfO_2)_{0.34}$ thin films as gate dielectrics have been proposed to overcome the problems of tunneling current and degradation mobility inachieving a thin equivalent oxide thickness. An extremely thin $SiO_2$ layer is used in order to separate the carrier in MOSFET channel from the dielectric field fluctuation caused by phonons in the dielectric which decreases the carrier mobility. The electronic and optical properties influenced the device performance to a great extent. $(ZrO_2)_{0.66}(HfO_2)_{0.34}$ dielectric films on p-Si (100) were grown by atomic layer deposition method, for which the conduction band offsets, valence band offsets and band gapswere obtained by using X-ray photoelectron spectroscopy and reflection electron energy loss spectroscopy. The band gap, valence and conduction band offset values for $(ZrO_2)_{0.66}(HfO_2)_{0.34}$ dielectric thin film, grown on Si substrate were about 5.34, 2.35 and 1.87 eV respectively. This band alignment was similar to that of $ZrO_2$. In addition, The dielectric function (k, $\omega$), index of refraction n and the extinction coefficient k for the $(ZrO_2)_{0.66}(HfO_2)_{0.34}$ thin films were obtained from a quantitative analysis of REELS data by comparison to detailed dielectric response model calculations using the QUEELS-$\varepsilon$(k, $\omega$)-REELS software package. These optical properties are similar with $ZrO_2$ dielectric thin films.

• 한국축산식품학회지
• /
• 제42권3호
• /
• pp.398-410
• /
• 2022

We studied effects of aging methods and temperature on the physical, chemical, and amino acid composition of pork belly from Berkshire and Landrace×Yorkshire×Duroc (LYD) swine. Pork belly samples were assigned randomly to breed groups (Berkshire and LYD), aging temperature groups (0℃ and 9℃), and aging method groups. One samples of vacuum-packaged hanging pork bellies were hung in a refrigerated cooler with 83±2.0% humidity, while the other samples were immersed in a 3.5% salt solution in a vacuum package and subsequently stored in the same cooler for 2 weeks. LYD pork had lower pH and purge loss and higher lightness values than those of Berkshire pork (p<0.05). Moreover, thiobarbituric acid reactive substances and hardness values of LYD pork were lower than those of Berkshire pork after aging (p<0.05). Berkshire pork had a higher level of flavorful amino acids than LYD pork did during aging (p<0.05). Bellies aged at elevated temperatures for two weeks had higher volatile basic nitrogen. However, significantly higher percentages of flavorful and sweet taste amino acids were observed in bellies aged at 9℃ compared to those aged at 0℃ for 2 weeks. Moisture content was higher in immersed samples than hanging samples after two weeks of aging (p<0.05). Hanging pork bellies exhibited higher texture profiles than immersed pork bellies at two weeks (p<0.05). We concluded that breeds, aging temperature, and methods affected most quality attributes of pork belly.

• 한국포장학회지
• /
• 제28권3호
• /
• pp.217-221
• /
• 2022

저온에서 신선육을 보관 저장하는 용기의 기체조성을 고CO₂/저O₂ 농도로 자동적으로 제어하는 용기 시스템을 제작하고, 0℃에서 21일간 돼지고기 삼겹살을 담아 저장하면서 품질보전의 측면에서 진공 포장과 함기 대조구 조건과 비교하였다. CO₂ 주입 시간 프로그램에 의하여 CO₂ 농도는 47~60%, O₂ 농도는 7~10%로 유지될 수 있었고, 이는 호기적 세균 증식과 pH 증가의 억제의 효과와 함께 관능적 품질유지에 기여하였다. 진공포장은 함기 대조구에 비하여 낮은 미생물 성장과 pH 증가를 보여주었으나 높은 drip 손실의 단점을 보였다. 전체적 품질보존의 측면에서 고안된 고CO₂ 치환 용기는 육류의 품질유지에 효과적이며, 육류의 종류와 특성에 맞게 기체 농도 조건을 변경하여 활용범위를 확장할 수 있을 것이다.

• 마이크로전자및패키징학회지
• /
• 제11권1호
• /
• pp.43-47
• /
• 2004

We have been using Moisture Barrier Bags for dry packing of semiconductor packages to prevent moisture from absorbing during shipping. Moisture barrier bag material is required to be waterproof, vapor proof and offer superior ESD (Electro-static discharge) and EMI shielding. Also, the bag should be formed easily to the shape of products for vacuum packing while providing excellent puncture resistance and offer very low gas ＆ moisture permeation. There are some problems like pinholes and punctured bags after sealing and before the surface mount process. This failure may easily result in package pop corn crack during board mounting. The bags should be developed to meet the requirements of excellent electrical and physical properties by means of optimization of their raw material composition and their thickness. This study investigates the performance of moisture barrier bags by characterization of their mechanical endurance, tensile strength and through thermal analysis. By this study, we arrived at a robust material composition (polyester/Aluminate) for better packing.

• 센서학회지
• /
• 제17권1호
• /
• pp.75-80
• /
• 2008

In this work, we optimized a microbolometer for application of a $CO_2$ detector by using MEMS technology. We fabricated a stable thermal isolation structure by varying the lengths of supporting legs which affect bolometer performance. We could fabricate more stable thermal isolation structure for the microbolometer through the results of ANSYS simulations, and minimize the fabrication processes by using bulk micromachining to use a $CO_2$ detector. The microbolometer shows a detectivity of $2.5{\times}109$ cmHz$^{1/2}$/W at a chopper frequency of 8 Hz and a bias current of $6.25\;{\mu}A$ with a vacuum package of about $3.0{\times}10.3$ torr. Therefore, we put to conclusion that the microbolometer optimized in this experiment could be useful for the application of a $CO_2$ detector.