• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.212-222
• /
• 1992

To use polycrystalline Si Thin Film Transistor (poly-Si TFT) in high density SRAM instead of High Load Resistor (HLR), TFT is needed to show good electrical characteristics such as large carrier mobility, low leakage current, high driver current and low subthreshold swing. To satisfy these electrical characteristics, the trap state density must be reduced in the channel poly. Technological issues pertinent to the channel poly fabrication process are investigated and discussed. They are solid phase growth (SPG), Si-ion implantation, laser annealing and hydrogenation. The electrical properties of several CVD oxides used as the gate oxide of TFT are compared. The dependence of the electrical characteristics of TFT on source-drain ion-implantation dose, drain offset length and dopant lateral diffusion are also described.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.108-108
• /
• 2012

High-performance GaN-based light emitting diodes (LEDs) with high efficiency and excellent reliability have been of technological importance forapplications in full color display, automotive lighting, and solid state lighting. To realize high-performance and excellent-reliability LEDs, various technologies such as surface texturing, transparent conducting oxide, surface Plasmon, highly p-conduction layer, current blocking layer, photon-enhanced layer, and nanostructures have been extensively investigated. Among them, advanced core technologies based on how to suppress surface leakage and current crowding, how to enhance current injection efficiency and output power, and how to resist electrostatic damage will be displayed and discussed using our reported and preliminary results. New approaches like integrated LEDs will be also introduced and discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.342-342
• /
• 2011

산화막은 반도체 공정 중 가장 핵심적이며 기본적인 물질이다. 반도체 소자에서 내부의 캐리어들의 이동을 막고 전기를 절연시켜주는 절연체로서 역할을 하게 된다. 실제로 제작된 산화막에서는 dangling bond 혹은 내부에 축적되는 charge들의 의해 leakage가 생기게 되고 그에 따라 산화막의 특성은 저하되게 된다. 내부에서 특성을 저하시키는 defect을 감소시키기 위해 Plasma Treatment에 따른 특성변화를 관찰하였다. 본 연구에서는 최적화 시킨 Flexible TFT제작을 위해 저온에서 Silicon Oxide로 형성한 Gate Insulator에 각각 N2O, H2, NH3가스를 주입 후 Plasma처리를 하였다. 특성화 시킨 Gate Insulator를 이용하여 MIS(Metal-Insulator-Semiconductor)구조를 제작 후 C-V curve특성변화, Dit의 감소, Stress bias에 따른 stability를 확인 하였다.

• Journal of Korean Vacuum Science & Technology
• /
• v.2 no.2
• /
• pp.92-96
• /
• 1998

Ferroelectric Bi-layered oxides SrBi2Ta2O9 (SBT) thin films have been deposited on Pt/Ti/SiO2/Si substrates using multi-target sputtering. Structure, composition, and electrical properties have been investigated on films. The SBT films were deposited with the various bismuth sputtering powers. The SBT films deposited with the bismuth sputtering power of 20 W have the most dense microstructure and the remanent polarization (Pr) of 9.2 ${\mu}$C/cm and the coercive field (Ec) of 43.8 kV/cm at an applied voltage of 5V. The SBT films deposited with the bismuth sputtering power of 20W showed a fatigue-free characteristics up to 1.0${\times}$1010 cycles under 5V bipolar pulse and a leakage current density of 2.0${\times}$10-8 A/$\textrm{cm}^2$ at 200 kV/cm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.239-239
• /
• 2013

For more than four decades, ion-sensitive field-effect transistor (ISFET) sensors that respond to the change of surface potential on a membrane have been intensively investigated in the chemical, environmental, and biological spheres, because of their potential, in particular their compatibility with CMOS manufacturing technology. Here, we demonstrate a new type of ISFET with dual-gate (DG) structure fabricated on ultra-thin body (UTB), which highly boosts sensitivity, as well as enhancing chemical stability. The classic ion-sensitive field-effect transistor (ISFET) has been confronted with chronic problems; the Nernstian response, and detection limit with in the Debye length. The super-coupling effects imposed on the ultra thin film serve to not only maximize sensitivity of the DG ISFET, but also to strongly suppress its leakage currents, leading to a better chemical stability. This geometry will allow the ISFET based biosensor platform to continue enhancement into the next decade.

• Journal of the Korean Vacuum Society
• /
• v.19 no.1
• /
• pp.52-57
• /
• 2010

$BiFeO_3/Pb(Zr_{0.52}Ti_{0.48})O_3$(BFO/PZT) multilayer thin films have been prepared on a Pt/Ti/$SiO_2$/Si(100) substrate by chemical solution deposition. BFO single layer, BFO/PZT bilayer and multilayer thin films were studied for comparison. X-ray diffraction analysis showed that the crystal structure of all films was multi-orientated perovskite phase without amorphous and impurity phase. The leakage current density at 500 kV/cm was reduced by approximately four and five orders of magnitude by bilayer and multilayer structure films, compared with BFO single layer film. The low leakage current density leads to saturated P-E hysteresis loops of bilayer and multilayer films. In BFO/PZT multlayer film, saturated remanent polarization of $44.3{\mu}C/cm^2$ was obtained at room temperature at 1 kHz with the coercive field($2E_c$) of 681.4 kV/cm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.211-212
• /
• 2010

GaN 기반의 상부발광형 LED는 동작되는 동안 생기는 전기적 단락, 그리고 칩 위의 p-형 전극과 n-형 전극 사이에 생기는 누설전류 및 신뢰성 확보를 위하여 칩 표면에 passivation 층을 형성하게 된다. SiO2, Si3N4와 같은 passivation layers는 일반적으로 PECVD (Plasma Enhanced Chemical Vapor Deposition)공정을 이용한다, 하지만 이는 공정 특성상 plasma로 인한 damage가 유발되기 때문에 표면 누설 전류가 증가 한다. 이로 인해 forward voltage와 reverse leakage current의 특성이 저하된다. 본 실험에서는 원자층 단위의 박막 증착으로 인해 PECVD보다 단차 피복성이 매우 우수한 PEALD(Plasma Enhanced Atomic Layer Deposition)공정을 이용하여 Al2O3 passivation layer를 증착한 후, 표면 누설전류와 빛의 출력 특성에 대해서 조사해 보았다. PSS (patterned sapphire substrate) 위에 성장된 LED 에피구조를 사용하였고, TCP(Trancformer Copled Plasma)장비를 사용하여 에칭 공정을 진행하였다. 이때 투명전극을 증착하기 위해 e-beam evaporator를 사용하여 Ni/Au를 각각 $50\;{\AA}$씩 증착한 후 오믹 특성을 향상시키기 위하여 $500^{\circ}C$에서 열처리를 해주었다. 그리고 Ti/Au($300/4000{\AA}$) 메탈을 사용하여 p-전극과 n-전극을 형성하였다. Passivation을 하지 않은 경우에는 reverse leakage current가 -5V 에서 $-1.9{\times}10-8$ A 로 측정되었고, SiO2와 Si3N4을 passivation으로 이용한 경우에는 각각 $8.7{\times}10-9$과 $-2.2{\times}10-9$로 측정되었다. Fig. 1 에서 보면 알 수 있듯이 5 nm의 Al2O3 film을 passivation layer로 이용할 경우 passivation을 하지 않은 경우를 제외한 다른 passivation 경우보다 reverse leakage current가 약 2 order ($-3.46{\times}10-11$ A) 정도 낮게 측정되었다. 그 이유는 CVD 공정보다 짧은 ALD의 공정시간과 더 낮은 RF Power로 인해 plasma damage를 덜 입게 되어 나타난 것으로 생각된다. Fig. 2 에서는 Al2O3로 passivation을 한 소자의 forward voltage가 SiO2와 Si3N4로 passivation을 한 소자보다 각각 0.07 V와 0.25 V씩 낮아지는 것을 확인할 수 있었다. 또한 Fig. 3 에서는 Al2O3로 passivation을 한 소자의 output power가 SiO2와 Si3N4로 passivation을 한 소자보다 각각 2.7%와 24.6%씩 증가한 것을 볼 수 있다. Output power가 증가된 원인으로는 향상된 forward voltage 및 reverse에서의 leakage 특성과 공기보다 높은 Al2O3의 굴절률이 광출력 효율을 증가시켰기 때문인 것으로 판단된다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.255-256
• /
• 2009

The anti suck back centering (ASBC) for preventing backflow of oil for oil rotary pump was designed in the power failure. To evaluate the evacuation characteristics, we manufactured the mini vacuum system, personal computer, AD converter (National instrument, NI-6009), and automatic controller with touch panel for a basis. In this study, we measured the evacuation characteristics of ABSC and analyzed the flow field of viscous flow regime using a commercial software, CFD-ACE+. Also, the leakage of the advaced ASBC for leveling was measured.

• Journal of Bio-Environment Control
• /
• v.18 no.3
• /
• pp.200-207
• /
• 2009

This study was conducted to analyze the variations of air temperature, relative humidity and pressure in a low pressure chamber for plant growth. The low pressure chamber was composed of an acrylic cylinder, a stainless plate, a mass flow controller, an elastomer pressure controller, a read-out-box, a vacuum pump, and sensors of air temperature, relative humidity, and pressure. The pressure leakage in the low pressure chamber was greatly affected by the material and connection method of tubes. The leakage rate in the low pressure chamber with the welding of the stainless tubes and a plate decreased by $0.21kPa{\cdot}h^{-1}$, whereas the leakage in the low pressure chamber with teflon tube and rubber O-ring was given by $1.03kPa{\cdot}h^{-1}$. Pressure in the low pressure chamber was sensitively fluctuated by the air temperature inside the chamber. An elastomer pressure controller was installed to keep the pressure in the low pressure chamber at a setting value. However, inside relative humidity at dark period increased to saturation level.. Two levels (25 and 50kPa) of pressure and two levels (500 and 1,000sccm) of mass flow rate were provided to investigate the effect of low pressure and mass flow rate on relative humidity inside the chamber. It was concluded that low setting value of pressure and high mass flow rate of mixed gas were the effective methods to control the pressure and to suppress the excessive rise of relative humidity inside the chamber.

• Journal of Korean Vacuum Science & Technology
• /
• v.4 no.4
• /
• pp.97-101
• /
• 2000

In this study, two kinds of barium strontium titanate (BST) samples were prepared. One is a conventional BST film that is sputtered in a mixture of argon and oxygen. The other is a nitrogen-incorporated BST film that is sputtered in a mixture of oxygen and intentionally added nitrogen instead of argon gas. The structural properties of both of the BST films had not changed significantly with the species of sputtering gas. However, the leakage current of BST films sputtered at ($N_2$+O$_2$) atmosphere was lower than those sputtered at (Ar +O$_2$) atmosphere: 1.9$\times$10$^{-8}$ A/cm$^2$ at 2V for the films prepared at (Ar +O$_2$) atmosphere and 8.6$\times$10$^{-9}$ A/cm$^2$ for the films at ($N_2$+O$_2$) atmosphere. From an XPS analysis, it has been found that nitrogen atoms are incorporated in BST films with a concentration of 1.92 at% and form a certain oxynitride phase. It is proposed that nitrogen atoms are able to fill the oxygen vacancies of BST films during sputtering process, and then the leakage current reduces due to a decrease in the vacancies. The BST films sputtered at ($N_2$+O$_2$) atmosphere have superior electrical properties to the films sputtered at (Ar +O$_2$), without any significant structural changes.