• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.34-35
• /
• 2019

The objective of this study is to analyze the risk of collision accidents to the VTSOs(Vessel Traffic Service Operators) as small vessels are expanded for monitoring targets. For this purpose, the risks of accidents and quasi-incidents involving small ships in the VTS area were analyzed by the collision risk model(CoRI) from the view-point of VTSOs. In addition, by analyzing risk of whether or not small vessels are included in the monitoring target by CoRI, we will contribute to the preparation of a proper range of the vessel for monitoring taget through various case studies in the future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.254-261
• /
• 2022

Every vessel shall proceed at a safe speed to avoid collision. Additionally, every vessel shall comply with the speed limit rules in the territorial water and internal waters of Korea. The VTS operator shall properly control the compliance of the vessel with the safe speed and speed limit rules. Safe speed under the COLREG 1972 is not explicitly stipulated in knots. However, under the Domestic law for traffic safety-specific sea areas, etc., the speed limit is specified in knots and complied with. This speed limit rule is mainly based on the 'speed made good over the ground'; however, in some places, it is based on the 'speed making way through the water'. In this paper, I analyzed marine accidents that occurred in the past 5 years and the rate of violation of speed limits. Furthermore, I reviewed safe speed under the COLREG 1972, speed limit rules under domestic and foreign laws, and cases of non-compliance with safe speed in the judgment of the Korea Maritime Safety Tribunal. Resultantly, I suggested in this paper that the speed limit rules in the domestic law must be observed by vessels to prevent marine accidents, and the rules which are stipulated in terms of 'speed making way through the water' must be revised as 'speed made good over the ground' such that the vessels can easily comply with them and the VTS operator can control the vessel properly.

• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.569-576
• /
• 2008

By the development of international trade in last decades, Korean International Trade has been grown rapidly and Korean Port and Port facilities have been improved stimultaneously: finally volume of the marine traffic increased rapidly. Presently, 15 VTS centers have serving in Korean waters and since the introduction of the first VIS Center in Korea there is no quantitative analysis to find workload of VIS operator. After that Port-MIS and De-brief data have been gathered for 7 days and inbound-outbound vessels time-g/t table prepared and traffic volume examined for each V1S center. Hence $L^2$ conversion traffic volume and dangerous vessel ratio obtained Later on conversion controlled number obtained by denoting ratio 1.0 to directly controlled vessels by VTSO and denoting ratio 0.3 to indirectly controlled vessels by VTSO. Traffic volume, large vessel ratio, dangerous vessel ratio, dimension of VTS controlled area, marine accident occurrence frequency and communication volume of comm. log can be counted as a factor which influence to workload of VTSO. All those factors have been examined and analyzed. Finally, ship's size and dangerous vessel ratio have been chosen to derive the Number of composite conversion control for workload formula.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.2
• /
• pp.195-200
• /
• 2010

Basing on the recommendation and guideline of IALA, Korean VTS authority made an instruction about the training and qualification of VTS operators, and three model courses for training have been performed at a training institute which has one VTS simulator. However, the simulator has not been enough to make training fully satisfactory because of several signs of limitations including inaccurate method for calculating ship's movement and inconvenient location for training. In this paper, a new simulator was proposed to make up for the weak points replacing the current simulator. The proposed simulator adopts mathematical model for calculating exactly ship's movement which heightens the effect of training with simulator. And also it can be used through Internet so as to make long-distance training possible without visiting the training center. The effectiveness and the convenience of training with the proposed simulator are expected to be improved.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.26-27
• /
• 2019

This study is to calculate the Real-Time contact point of ellipses between the vessels ships by Ship's Bumper Theory. The Real-Time contact point of ship's bumper ellipses can be used the important tool to feel the perceived risk evaluation of ship's collision risk by VTS operator. In this paper, The warning information to feel the risk of collision between the vessels in advance is able to help them for VTS operation, We will study the technique to certify the perceived risk of collision from several different angles by programming.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.822-831
• /
• 2021

Although programs have been developed to evaluate the risk of dragging anchors, it is practically difficult for VTS(vessel traffic service) operators to calculate and evaluate these risks by obtaining input factors from anchored ships. Therefore, in this study, the gross tonnage (GT) that could be easily obtained from the ship by the VTS operators was set as an independent variable, and linear and nonlinear regression analyses were performed using the input factors as the dependent variables. From comparing the fit of the polynomial model (linear) and power series model (nonlinear), the power series model was evaluated to be more suitable for all input factors in the case of container ships and bulk carriers. However, in the case of tanker ships, the power supply model was suitable for the LBP(length between perpendiculars), width, and draft, and the polynomial model was evaluated to be more suitable for the front wind pressure area, weight of the anchor, equipment number, and height of the hawse pipe from the bottom of the ship. In addition, all other dependent variables, except for the front wind pressure area factor of the tanker ship, showed high degrees of fit with a coefficient of determination (R-squared value) of 0.7 or more. Therefore, among the input factors of the dragging anchor risk assessment program, all factors except the external force, seabed quality, water depth, and amount of anchor chain let out are automatically applied by the regression analysis model formula when only the GT of the ship is provided.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.132-134
• /
• 2011

In Communications are intended elicit respondses through a conversation or communication styles between speaker and audience. VTSO and the ship operator's intent to communicate well with each other thus leading to the conclusion that must be accomplished It should be completed with MRC which is a poor means to understand and persuasive manner, and conclusions expressed are easily able to derive strategic communication skills. Forever, but these expression and technic can not force where the operator deciding factor in the law frame should not spiral out of the border. VTSO communication skills should be taken into such factors would be high level technic. Now here's I'd like to study that occured in the maritime communications field to be studied deeper issues and a category of expression technic, expression for the VTSO.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.263-264
• /
• 2018

The quality of service provided by Vessel Traffic Services depends on the tasks characteristics and the work environment of Vessel Traffic Service operators. In this paper, the working conditions of Vessel Traffic Service operators are analyzed in order to propose methods to improve the working environment of Vessel Traffic Services and to provide high quality service through them. The questionnaire survey was conducted for Vessel Traffic Service operators working at 20 Vessel Traffic Service centers. It is expected that it might be used as the basic data for improvement of work environment and organization of Vessel Traffic Service center in the future.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.3
• /
• pp.286-292
• /
• 2017

The Coastal VTS will be continuously constructed to prevent marine traffic accidents in the coastal waters of the Republic of Korea. In order to provide the best traffic information service to the ship operator, it is important to understand the navigation risk factor. In this study, we analyzed the navigational hazards of Gunsan coastal area where the coastal VTS will be constructed until 2020. For this purpose, major traffic flows of merchant ships and density of vessels engaged in fishing were analyzed. This study was conducted by Automatic Identification System (AIS) and Vessel Pass (V-PASS) data. The grid intervals are 10 minute ${\times}$ 10 minute (latitude ${\times}$ longitude) based on the section of the sea. A total of 30 sections were analyzed by constructing a grid. As a result of the analysis, the major traffic flows of the merchant vessels in the coastal area of Gunsan were surveyed from north to south toward Incheon, Pyeongtaek, Daesan, Yeosu, Pusan and Ulsan, and from east to west in the port of Gunsan Port, 173-3, 173-6, 173-8, 183-2, 183-5, 183-8, 183-3, 184-1 and 184-2. As a result of the study, the fishing boats in Gunsan coastal area mainly operated in spring and autumn. On the other hand, the main traffic flow of merchant ships and the distribution of fishing vessels continue to overlap from March to June, so special attention should be paid to the control during this period.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.275-276
• /
• 2022

VTS operators instruct ships to wait for entry and departure to sail in one-way to prevent ship collision accidents in ports with narrow routes. Currently, the instructions are not based on scientific and statistical data. As a result, there is a significant deviation depending on the individual capability of the VTS operators. Accordingly, this study built a 1d-convolutional neural network model by collecting ship and weather data to predict the exact travel time for ship entry/departure waiting for instructions in the port. It was confirmed that the proposed model was improved by more than 4.5% compared to other ensemble machine learning models. Through this study, it is possible to predict the time required to enter and depart a vessel in various situations, so it is expected that the VTS operators will help provide accurate information to the vessel and determine the waiting order.