• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.152-155
• /
• 2006

Carbon nitride ($CN_X$) films were prepared by reactive RF magnetron sputtering system at various deposition conditions and the C-V characteristics of MIS(metal - insulator - semiconductor) capacitors that have the structures of Al/$CN_x$/p-Si/Al and Al/$CN_x$/$Si_3N_4$/p-Si/Al were investigated. The resistivity of carbon nitride was above $2.40{\times}10^8{\Omega}{\cdot}cm$ at room temperature. The C-V plot showed a typical capacitance-voltage characteristics of semiconductor insulating layers, while it showed hysterisis due to interface charges. Amorphous carbon nitride (a-$CN_x$) films, that have relatively high resistivity and low dielectric constant could be useful as interlayer insulator materials of VLSI(very large-scale integration) and ULSI(ultra large-scale integration).

• ETRI Journal
• /
• v.27 no.6
• /
• pp.691-696
• /
• 2005

In asynchronous transfer mode (ATM) networks, fixed length cells of 53 bytes are transmitted. A cell may be discarded during transmission due to buffer overflow or a detection of errors. Cell discarding seriously degrades transmission quality. The quality degradation can be reduced by employing efficient forward error control (FEC) to recover discarded cells. In this paper, we present the design and implementation of decoding equipment for FEC in ATM networks based on a single parity check (SPC) product code using very-large-scale integration (VLSI) technology. FEC allows the destination to reconstruct missing data cells by using redundant parity cells that the source adds to each block of data cells. The functionality of the design has been tested using the Model Sim 5.7cXE Simulation Package. The design has been implemented for a $5{\times}5$ matrix of data cells in a Virtex-E XCV 3200E FG1156 device. The simulation and synthesis results show that the decoding function can be completed in 81 clock cycles with an optimum clock of 56.8 MHz. A test bench was written to study the performance of the decoder, and the results are presented.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.2
• /
• pp.135-143
• /
• 2002

In this study, Multi-Values Logic processor was designed using the basic circuit of the electric current mode CMOS. First of all, binary FFT(Fast courier Transform) was extended and high-speed Multi-Valued Logic processor was constructed using a multi valued logic circuit. Compared with the existing two-valued FFT, the FFT operation can reduce the number of transistors significantly and show the simplicity of the circuit. Moreover, for the construction of amount was used inside the FFT circuit with the set of redundant numbers like {0, 1, 2, 3}. As a result, the defects in lines were reduced and it turned out to be effective in the aspect of normality an regularity when it was used designing VLSI(Very Large Scale Integration). To multiply FFT, the time and size of the operation was used toed as LUT(Lood Up Table).

• ETRI Journal
• /
• v.27 no.5
• /
• pp.504-510
• /
• 2005

This paper proposes a novel low-power video decoding scheme. In the encoded video bitstream, there is quite a large number of non-coded blocks. When the number of the non-coded blocks in a frame is known at the start of frame decoding, the workload of the video decoding can be estimated. Consequently, the supply voltage of very large-scale integration (VLSI) circuits can be lowered, and the power consumption can be reduced. In the proposed scheme, the encoder counts the number of non-coded blocks and stores this information in the frame header of the bitstream. Simulation results show that the proposed scheme reduces the power consumption to about 1/10 to 1/20.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.5
• /
• pp.71-80
• /
• 1995

The usual approach for desinging a fast multiplier involves finding a way to quickly add up all the partial products, based on parital product recoding scheme and carry-save addition. This paper describes theoretical medels for area and time complexities of Multibit Reconding Paralle Multiplier (MRPM), which is a generalization of the modified Booth recoding scheme. Based on the proposed models, time performance, hardware requirements and area-time efficiency are analyzed in order to determine optimal recoding size for very large scale integration (VLSI) realization of the MRPM. Some simulation results show that the MRPM with large multiplier and multiplicand size has optimal area-time efficiency at the recoding size of 4-bit.

• ETRI Journal
• /
• v.39 no.3
• /
• pp.326-335
• /
• 2017

In the uplink transmission of massive (or large-scale) multi-input multi-output (MIMO) systems, large dimensional signal detection and its hardware design are challenging issues owing to the high computational complexity. In this paper, we propose low-complexity hardware architectures of Richardson iterative method-based massive MIMO detectors. We present two types of massive MIMO detectors, directly mapped (type1) and reformulated (type2) Richardson iterative methods. In the proposed Richardson method (type2), the matrix-by-matrix multiplications are reformulated to matrix-vector multiplications, thus reducing the computational complexity from $O(U^2)$ to O(U). Both massive MIMO detectors are implemented using a 65 nm CMOS process and compared in terms of detection performance under different channel conditions (high-mobility and flat fading channels). The hardware implementation results confirm that the proposed type1 Richardson method-based detector demonstrates up to 50% power savings over the proposed type2 detector under a flat fading channel. The type2 detector indicates a 37% power savings compared to the type1 under a high-mobility channel.

• ETRI Journal
• /
• v.35 no.4
• /
• pp.697-705
• /
• 2013

Emerging trends in the area of digital very large scale integration (VLSI) signal processing can lead to a reduction in the cost of the cochlear implant. Digital signal processing algorithms are repetitively used in speech processors for filtering and encoding operations. The critical paths in these algorithms limit the performance of the speech processors. These algorithms must be transformed to accommodate processors designed to be high speed and have less area and low power. This can be realized by basing the design of the auditory filter banks for the processors on digital VLSI signal processing concepts. By applying a folding algorithm to the second-order digital gammatone filter (GTF), the number of multipliers is reduced from five to one and the number of adders is reduced from three to one, without changing the characteristics of the filter. Folded second-order filter sections are cascaded with three similar structures to realize the eighth-order digital GTF whose response is a close match to the human cochlea response. The silicon area is reduced from twenty to four multipliers and from twelve to four adders by using the folding architecture.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.236-250
• /
• 2016

Electrical Designs for Application Specific Integrated Circuits (ASIC) has undergone a change recently with the advent of the sub-wavelength lithography. The optical projection with 193 nm wavelength has been further extended with the use of immersion and other techniques. The competing trends for printing smaller design features have been discussed in this paper with the discussion of the electrical layout analysis to find unfriendly design features. The early knowledge of the unfriendly design features allows remedial actions in time for better yield on the wafer. There are existing standard design qualification criteria being used in the design and fabrication community, but they seem to be insufficient to guarantee defect free designs. This paper proposes an integrated approach for screening the layout with multiple aspects: layout geometry based, graphical analysis and process model based verification. The results have been discussed with few example design features from the 28nm design layout.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.3
• /
• pp.162-167
• /
• 1996

This paper deals with an implementation method for the one chip microprocessor(8097)-based capacitance type wave recorder for a measuring real-time wave height. The system was developed to make it possible to real-time remote sensing the wave height by deploying the RS-232/422/485 communication methods. The system test results for the developed system such as linearity, system stability and robustness of the disturbance was also verified through the performance tests of the system. Furthermore, the system was developed after due consideration with connecting the public network such as satellite mobile communication system and LAN, through the deploying VLSI(Very Large Scale Integration) design techniques.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.5
• /
• pp.349-357
• /
• 2016

The era of the Internet of Things (IoT) is upon us. In this era, minimizing power consumption becomes a primary concern for system-on-chip designers. While traditional power minimization and dynamic power management (DPM) techniques have been heavily explored to improve the power efficiency of devices inside very large-scale integration (VLSI) platforms, there is one critical factor that is often overlooked, which is the power conversion efficiency of a power delivery network (PDN). This paper is a tutorial that focuses on the power conversion efficiency of the PDN, and introduces novel methods to improve it. Circuit-, architecture-, and system-level approaches are presented to optimize PDN designs, while case studies for three different VSLI platforms validate the efficacy of the introduced approaches.