• Title/Summary/Keyword: VIM-2

Search Result 53, Processing Time 0.029 seconds

A knowledge-based DSS for the decision making under multi-objectives

  • 최용선;김성의
    • Proceedings of the Korean Operations and Management Science Society Conference
    • /
    • 1992.04b
    • /
    • pp.267-277
    • /
    • 1992
  • 본 논문은 다목적선형계획법을 위한 Decision Support System ASEOV-VIM을 소개하고 있다. ASEOV-VIM에는 1) efficient solution set전체에 대한 개괄과 search direction을 제새하는 ASEOV; 2) decision maker의 preference information을 도출해내는 VIM; 3) 위 두 부분간의 interface로 활용되는 Mediator등 3개의 하부시스템이 있다. ASEOV-VIM은 TURBO-C를 이용하여 personal computer에 구현되었다.

  • PDF

High Prevalence and Genotypic Characterization of Metallo-β-Lactamase (MBL)-Producing Acinetobacter spp. Isolates Disseminated in a Korean Hospital (국내 대학병원에서 분리된 Metallo-β-Lactamase (MBL) 생성 Acinetobacter spp. 분리주의 높은 출현율과 유전형 특징)

  • Yum, Jong Hwa
    • Korean Journal of Clinical Laboratory Science
    • /
    • v.51 no.4
    • /
    • pp.444-452
    • /
    • 2019
  • Carbapenem resistance, mediated by the major acquired metallo-β-lactamase (MBL) genes, has been increasingly reported, particularly for clinical isolates of Acinetobacter spp. Of the 191 nonduplicate clinical isolates of the carbapenem-nonsusceptible Acinetobacter spp. evaluated, 125 isolates (65.4%) were positive for the modified imipenem or meropenem-Hodge test, and 49 isolates (25.7%) were positive for the imipenem-EDTA+SMA double disk synergy test (DDS). PCR and sequencing of the blaVIM-2-allele and blaIMP-1-allele showed that 29 A. baumannii isolates and 1 A. calcoaceticus isolate had blaVIM-2, whereas 16 A. baumannii isolates and 2 A. calcoaceticus isolates had blaIMP-6; 1 isolate of the A. genomospecies 3 had blaVIM-2 and blaAIM-1. All the above MBL genes belong to class 1 integron. The size of class 1 integron encompassing blaVIM-2 or blaIMP-6 ranges from 2.8 kb to 3.2 kb in clinical isolates of A. baumannii, and 3.2 kb to 3.5 kb in clinical isolates of A. genomospecies 3. blaVIM-2 was most often located first or second in the class 1 integron, and these integrons often included aacA4. Due to dispersion of the MBL-producing Acinetobacter spp. as well as integron, which may encompass various resistance genes, there is an expectation for the increase of multidrug resistant Gram-negative bacteria, including resistance of carbapenems such as imipenem or meropenem. Hence, the development of new antimicrobial agents for treating severe Acinetobacter spp. infections is needed.

Prevalence and Diversity of MBL Gene-Containing Integrons in Metallo-β-Lactamase (MBL)-Producing Pseudomonas spp. Isolates Disseminated in a Korean Hospital

  • Yum, Jong Hwa
    • Biomedical Science Letters
    • /
    • v.25 no.4
    • /
    • pp.321-330
    • /
    • 2019
  • Carbapenem is recently considered as the last resort of the therapeutics for gram negative bacterial infection. Increasing of organisms producing metallo-β-lactamase (MBL), we have difficulty in choosing the antimicrobial agents. Among 345 clinical isolates of Pseudomonas spp., 61 isolates (17.7%) were positive for the modified imipenem or meropenem-Hodge test and 55 isolates (15.9%) were positive for the imipenem-EDTA + SMA double disk synergy test (DDS). PCR and sequencing of blaVIM-2-allele and blaIMP-1-allele showed that 17 isolates of Pseudomonas aeruginosa, 9 isolates of Pseudomonas taiwnensis and 2 Pseudomonas plecoglossicida had blaVIM-2, and 22 isolates of P. aeruginosa and one Pseudomonas otitidis had blaIMP-6. These MBL genes were all in class 1 integron. The size of class 1 integron with blaVIM-2 ranged from 3.5 kb to 5.5 kb in clinical isolates of Pseudomonas spp. including P. aeruginosa. blaVIM-2 was most often located first in the class 1 integron, sometimes in the second or third position, and these integrons often had aacA4 or aadA1. Strict infection control measures are needed to more effectively prevent further spread of these MBL-producing Pseudomonas spp. In addition, MBL-producing Pseudomonas spp. is expected to continue to spread in various countries and regions.

Comparison of Thalamotomy with Deep Brain Stimulation in Essential Tremor (본태성 진전에 대한 시상파괴술과 뇌심부 자극술의 비교)

  • Lee, Yoon-Ho;Park, Yong-Sook;Chang, Jong-Hee;Chang, Jin-Woo;Park, Yong-Gou;Chung, Sang-Sup
    • Journal of Korean Neurosurgical Society
    • /
    • v.37 no.2
    • /
    • pp.112-115
    • /
    • 2005
  • Objective: Thalamic lesioning and deep brain stimulation(DBS) have proved to be beneficial to the treatment of essential tremor(ET). The authors compared the effects and complications of two modalities. Methods: A total of 34 patients with ET were treated with ventral intermediate(Vim) nucleus thalamotomy or Vim DBS from May 1999 to May 2003. The procedure of lesioning or stimulation were performed as usual manner with or without microelectrode recording. Postoperatively, utilizing the various combinations of frequency, voltage and pulse width optimized the stimulation. The degree of improvements of tremor and the occurrence of the complications were evaluated postoperatively and at follow-up. Results: There were 38 procedures, including 27 with Vim thalamotomy and 11 with DBS, in 34 patients. Of the thalamotomy group, left Vim lesioning is 25 and right one is 2. Follow-up duration ranged from 12 to 57 months. In the thalamotomy group, the rate of overall good outcome was 88.9% but 12 patients (44.4%) showed permanent adverse effects. In the cases of stimulation, the rate of overall good outcome was 90.9% and two patients had acceptable dysarthria. Conclusion: Both Vim thalamotomy and Vim DBS were effective for the treatment of ET, although perioperative adverse effects tended to be higher in patients who had thalamotomy. In cases of DBS, adjustments of stimulation parameters enabled an acceptable position to be achieved with tremor control and unwanted effects.

Preparations and Antistatic/UV Blocking Properties of Dual Functional Phthalocyanine Materials (기능성 프탈로시아닌 물질의 제조 및 대전방지/UV 차단 특성)

  • Kang, Young-Goo;Ihm, Dae-Woo;Kim, Shi-Surk;Park, Byoung-Ki
    • Journal of the Korean Society of Safety
    • /
    • v.23 no.1
    • /
    • pp.66-71
    • /
    • 2008
  • A new route to phthalocyanine complexes were developed to synthesize these products by fusion in the absence of solvent. This new method of synthesis without using solvent has advantages over the conventional synthetic methods since there are no risk of explosion and formation of harmful vapor from organic solvent. Reaction of PcFe with axial ligands such as $PcFe(4-VP)_2$[Pc: Phthalocyanine, 4-VP: 4-Vinylpyridine] and $PcFe(VIM)_2$[VIM: 1-Vinylimidazole] afforded powderlike, pure dark greenish blue colored products. The resulted products are soluble in $CH_2Cl_2$ and found to be complexes of the type $PcFeL_2$. Spectral properties were studied with ATR-FTIR and UV/Vis. Thermal and electrical characterization was also performed. Phthalocyanine complexes exhibit useful properties such as UV/Vis blocking, antistatic characteristics and excellent thermal stability and we anticipate various applicability in numerous products.

Development of a micro-scale Y-Zr-O oxide-dispersion-strengthened steel fabricated via vacuum induction melting and electro-slag remelting

  • Qiu, Guoxing;Zhan, Dongping;Li, Changsheng;Qi, Min;Jiang, Zhouhua;Zhang, Huishu
    • Nuclear Engineering and Technology
    • /
    • v.51 no.6
    • /
    • pp.1589-1595
    • /
    • 2019
  • In this paper, the CLAM steel strengthened by micro-scale Y-Zr-O was prepared by vacuum induction melting followed by electroslag remelting (VIM-ESR). Yttrium (Y) and zirconium (Zr) were easy to aggregates into massive yttrium-zirconium-rich inclusions in the steel melted by vacuum induction melting (VIM), which would interrupt the continuity of the matrix and reduce the mechanical properties of steel. Micron-sized Y-Zr-O inclusions would be produced with the removal of original blocky Y-Zr-rich inclusions and the submicron-sized inclusions smaller than $0.2{\mu}m$ could be retained in the steel. The small grain size and the better refinement and distribution uniformity of Y-Zr-O inclusions after remelting would be responsible for the better yield strength and toughness. For VIM-ESR alloy, the ultimate tensile strength is 749 MPa and the yield strength is 642 MPa at room temperature, meanwhile they are 391 MPa and 367 MPa at $600^{\circ}C$, respectively. Meanwhile, the ductile-brittle transition temperature (DBTT) reduced from $-43^{\circ}C$ (VIM) to $-76^{\circ}C$ (VIM-ESR).

Multidrug-Resistant Providencia Isolates Carrying $bla_{PER-1},\;bla_{VIM-2}$, and armA

  • Lee, Hee-Woo;Kang, Hee-Young;Shin, Kyeong-Seob;Kim, Jung-Min
    • Journal of Microbiology
    • /
    • v.45 no.3
    • /
    • pp.272-274
    • /
    • 2007
  • During May to July 2004, three strains of Providencia spp. with multidrug-resistance (MDR) were isolated from urinary specimen of three patients hospitalized with a same hospital room. By PCR analysis, all three strains have been found to carry both VIM-2 type $metallo-{\beta}-lactamase$ gene and PER-1 type extended spectrum ${\beta}-lactamase$ gene. One out of three strains carried additional resistance gene, armA, 16S rRNA methylase gene responsible for high level resistance to aminoglycosides. To our knowledge, this is the first report on the identification of Providencia spp. simultaneously carrying $bla_{VIM-2},\;bla_{PER-1}$, and armA genes.

Experimental Study on Reducing Motion of Circular Cylinder in Currents (조류 중 원형실린더 형상 구조물의 거동감소를 위한 실험적 연구)

  • Lim, Jae Hwan;Jo, Hyo Jae;Hwang, Jae Hyuk;Kim, Jae Heui;Lee, Tae Kyung;Choi, Yoon Woo;Lee, Min Jun;Kim, Young Kyu
    • Journal of Ocean Engineering and Technology
    • /
    • v.33 no.4
    • /
    • pp.350-357
    • /
    • 2019
  • The development of marine technology is expected to increase the demand for marine plants because of increasing oil prices. Therefore, there is also expected to be an increase in the demand for cylindrical structures such as URF (umbilical, riser, flowline) structures and spars, which are used operating in various seas. However, a cylindrical structure experiences vortex induced motion (VIM) in a current. In particular, for risers and umbilicals, it is important to identify the characteristics of the VIM because interference between structures can occur. In addition, various studies have been conducted to reduce VIM because it is the cause of fatigue damage to structures. The helical strake, which was developed for VIM reduction, has an excellent VIM reduction performance, but is difficult to install on structures and has a negative effect on heave motion. Therefore, the purpose of this study was to supplement the shortcomings of the helical strake and develop a high-performance reduction device. In the reduction device developed in this study, a string is placed around the structure inside the flow, causing vibration. The vibration of this string causes a small turbulence in the flow field, reducing the VIM effect on the structure. Finally, in this study, the 2-DOF motion characteristics of models without a suppression device, models with a helical strake, and models with a string were investigated, and their reduction performances were compared through model tests.

Characteristics of High Frequency Induction-Hardened Bearing Steel Produced by VIM (VIM에 의해 제조된 고주파 유도경화 베어링강의 특성에 관한 연구)

  • Choe, Byeong-Yeong;Jang, Jeong-Seok
    • Korean Journal of Materials Research
    • /
    • v.8 no.12
    • /
    • pp.1176-1181
    • /
    • 1998
  • Characteristics of high frequency induction- hardened bearing steel have been investigated using 0.55wt.% C-1.68wt.% Mn specimens produced by vacuum induction melting (VIM). The K4 value in DIN 57602 of the specimens was assessed to be 6.41, high level of cleanliness. The specimens were high frequency induction-hardened to form heterogeneous submicron- lath martensite in the surface hardened layer with about 2.5mm in effective depth. Rolling contact fatigue tests were conducted in elasto-hydrodynamic lubricating conditions under a maximum Hertzian contact stress of$ 492kgmm^{-2}$ . It was found that microhardness in the subsurface, up to about $500\mu\textrm{m}$ in depth, below the raceway of rolling contact fatigued specimens was increased in comparison with that of induction-hardened layers. The depth of maximum microhardness- increased region was about $100\mu\textrm{m}$ from surface, showing white etching area. Crack initiation and propagation in the white etching area below the raceway of rolling contact fatigued specimens were observed.

  • PDF

Cyr61/CCN1 Overexpression Induces Epithelial-Mesenchymal Transition Leading to Laryngeal Tumor Invasion and Metastasis and Poor Prognosis

  • Liu, Ying;Zhou, Yan-Dong;Xiao, Yu-Li;Li, Ming-Hua;Wang, Yu;Kan, Xuan;Li, Qiu-Ying;Lu, Jian-Guang;Jin, De-Jun
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.16 no.7
    • /
    • pp.2659-2664
    • /
    • 2015
  • Background: To examine the expression of cysteine-rich 61 (Cyr61/CCN1) protein in laryngeal squamouscell carcinoma (LSCC) tissues, and its relationship with the tumor epithelial-mesenchymal transition (EMT), invasion, metastasis, and prognosis. Materials and Methods: Immunohistochemistry was used to detect the expressions of Cyr61, Vimentin (Vim), and E-cadherin (E-cad) in 88 cases of LSCC tissues and 30 cases of tumor-adjacent normal tissues. Vim and E-cad were used as mesenchymal and epithelial markers, respectively, to determine the relationship between Cyr61 expression and the EMT of LSCC cells. In addition, clinical and histopathological data were combined to analyze the relationship between the positive-expression rates of Cyr61, Vim and E-cad and LSCC invasion, metastasis and prognosis. Results: In LSCC tissues, Vim expression rate was significantly higher than that of the tumor-adjacent tissues, whereas E-cad expression rate was significantly lower than that of the tumor-adjacent tissues. The Vim expression rate was significantly higher in stages T3 and T4 than in stages T1 and T2 LSCC tissues, whereas E-cad expression rate was significantly lower in stages T3 and T4 than in stages T1 and T2 LSCC tissues. Compared to the group without lymph node metastasis, the Vim expression rate was significantly higher and the E-cad expression rate was significantly lower in the group with lymph node metastasis. The expression rate of Cyr61 was significantly higher in LSCC tissues than in the tumor-adjacent normal tissues. In addition, the Cyr61 expression rate was higher in stages T3 and T4 than in stages T1 and T2 LSCC, and higher in the group with lymph node metastasis than in the group without lymph node metastasis. The Vim expression rate was significantly higher in the Cyr61 positive group than in the Cyr61 negative group, whereas the E-cad expression rate was significantly higher in the Cyr61 negative group than in the Cyr61 positive group. Survival analysis indicated that survival rates of Cyr61 positive, Vim positive and E-cad negative groups were significantly lower than that of Cyr61 negative, Vim negative and E-cad positive groups, respectively. Conclusions: Cyr61 expression is closely associated with LSCC invasion and lymph node metastasis. Overexpression of Cyr61 may induce EMT and therefore leads to LSCC invasion and metastasis and poor prognosis. Cyr61 may become a new maker for clinical prediction of LSCC invasion and metastasis and a new target for LSCC treatment.