• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.4
• /
• pp.111-124
• /
• 2010

To monitor the environment of land surface change is considered as an important research field since those parameters are related with land use, climate change, meteorological study, agriculture modulation, surface energy balance, and surface environment system. For the change detection, many different methods have been presented for distributing more detailed information with various tools from ground based measurement to satellite multi-spectral sensor. Recently, using high resolution satellite data is considered the most efficient way to monitor extensive land environmental system especially for higher spatial and temporal resolution. In this study, we use two different spatial resolution satellites; the one is SPOT/VEGETATION with 1 km spatial resolution to detect coarse resolution of the area change and determine objective threshold. The other is Landsat satellite having high resolution to figure out detailed land environmental change. According to their spatial resolution, they show different observation characteristics such as repeat cycle, and the global coverage. By correlating two kinds of satellites, we can detect land surface change from mid resolution to high resolution. The K-mean clustering algorithm is applied to detect changed area with two different temporal images. When using solar spectral band, there are complicate surface reflectance scattering characteristics which make surface change detection difficult. That effect would be leading serious problems when interpreting surface characteristics. For example, in spite of constant their own surface reflectance value, it could be changed according to solar, and sensor relative observation location. To reduce those affects, in this study, long-term Normalized Difference Vegetation Index (NDVI) with solar spectral channels performed for atmospheric and bi-directional correction from SPOT/VEGETATION data are utilized to offer objective threshold value for detecting land surface change, since that NDVI has less sensitivity for solar geometry than solar channel. The surface change detection based on long-term NDVI shows improved results than when only using Landsat.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.4
• /
• pp.105-113
• /
• 2016

Fire radiative power(FRP), which means the power radiated from wildfire, is used to estimate fire emissions. Currently, the geostationary satellites of East Asia do not provide official FRP products yet, whereas the American and European geostationary satellites are providing near-real-time FRP products for Europe, Africa and America. This paper describes the first retrieval of Himawari-8 FRP using the mid-infrared radiance method and shows the comparisons with MODIS FRP for Sumatra, Indonesia. Land surface emissivity, an essential parameter for mid-infrared radiance method, was calculated using NDVI(normalized difference vegetation index) and FVC(fraction of vegetation coverage) according to land cover types. Also, the sensor coefficient for Himawari-8(a = 3.11) was derived through optimization experiments. The mean absolute percentage difference was about 20%, which can be interpreted as a favourable performance similar to the validation statistics of the American and European satellites. The retrieval accuracies of Himawari FRP were rarely influenced by land cover types or solar zenith angle, but parts of the pixels showed somewhat low accuracies according to the fire size and viewing zenith angle. This study will contribute to estimation of wildfire emissions and can be a reference for the FRP retrieval of current and forthcoming geostationary satellites in East Asia.

• Korean Journal of Remote Sensing
• /
• v.33 no.2
• /
• pp.149-158
• /
• 2017

Fine temporal and spatial resolution of image data are necessary to monitor the phenology of vegetation. However, there is no single sensor provides fine temporal and spatial resolution. For solve this limitation, researches on spatiotemporal data fusion methods are being conducted. Among them, FSDAF (Flexible spatiotemporal data fusion) can fuse each band in high accuracy.In thisstudy, we applied MODIS NDVI and Landsat NDVI to enhance time resolution of NDVI based on FSDAF algorithm. Then we proposed the possibility of utilization in vegetation phenology monitoring. As a result of FSDAF method, the predicted NDVI from January to December well reflect the seasonal characteristics of broadleaf forest, evergreen forest and farmland. The RMSE values between predicted NDVI and actual NDVI (Landsat NDVI) of August and October were 0.049 and 0.085, and the correlation coefficients were 0.765 and 0.642 respectively. Spatiotemporal data fusion method is a pixel-based fusion technique that can be applied to variousspatial resolution images, and expected to be applied to various vegetation-related studies.

• Journal of Korea Water Resources Association
• /
• v.56 no.4
• /
• pp.235-243
• /
• 2023

Due to the revision of the River Act and the enactment of the Act on the Investigation, Planning, and Management of Water Resources, a regular bed change survey has become mandatory and a system is being prepared such that local governments can manage water resources in a planned manner. Since the topography of a bed cannot be measured directly, it is indirectly measured via contact-type depth measurements such as level survey or using an echo sounder, which features a low spatial resolution and does not allow continuous surveying owing to constraints in data acquisition. Therefore, a depth measurement method using remote sensing-LiDAR or hyperspectral imaging-has recently been developed, which allows a wider area survey than the contact-type method as it acquires hyperspectral images from a lightweight hyperspectral sensor mounted on a frequently operating drone and by applying the optimal bandwidth ratio search algorithm to estimate the depth. In the existing hyperspectral remote sensing technique, specific physical quantities are analyzed after matching the hyperspectral image acquired by the drone's path to the image of a surface unit. Previous studies focus primarily on the application of this technology to measure the bathymetry of sandy rivers, whereas bed materials are rarely evaluated. In this study, the existing hyperspectral image-based water depth estimation technique is applied to rivers with vegetation, whereas spatio-temporal hyperspectral imaging and cross-sectional hyperspectral imaging are performed for two cases in the same area before and after vegetation is removed. The result shows that the water depth estimation in the absence of vegetation is more accurate, and in the presence of vegetation, the water depth is estimated by recognizing the height of vegetation as the bottom. In addition, highly accurate water depth estimation is achieved not only in conventional cross-sectional hyperspectral imaging, but also in spatio-temporal hyperspectral imaging. As such, the possibility of monitoring bed fluctuations (water depth fluctuation) using spatio-temporal hyperspectral imaging is confirmed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.2
• /
• pp.121-132
• /
• 2016

This study proposes an approach for simulating high spatial resolution satellite images acquired under arbitrary sun-sensor geometry using existing images and 3D (three-dimensional) data. First, satellite images, having significant differences in spectral regions compared with those in the simulated image were transformed to the same spectral regions as those in simulated image by using the UPDM (Universal Pattern Decomposition Method). Simultaneously, shadows cast by buildings or high features under the new sun position were modeled. Then, pixels that changed from shadow into non-shadow areas and vice versa were simulated on the basis of existing images. Finally, buildings that were viewed under the new sensor position were modeled on the basis of open library-based 3D reconstruction program. An experiment was conducted to simulate WV-3 (WorldView-3) images acquired under two different sun-sensor geometries based on a Pleiades 1A image, an additional WV-3 image, a Landsat image, and 3D building models. The results show that the shapes of the buildings were modeled effectively, although some problems were noted in the simulation of pixels changing from shadows cast by buildings into non-shadow. Additionally, the mean reflectance of the simulated image was quite similar to that of actual images in vegetation and water areas. However, significant gaps between the mean reflectance of simulated and actual images in soil and road areas were noted, which could be attributed to differences in the moisture content.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.34-36
• /
• 2003

In boreal conifers in China's Northeast area, maximum latewood density (MXD) of tree-ring varies in response to growing season temperature. Forest net productivity can be estimated using the Normalized-difference Vegetation Index (NDVI) calculated from satellite sensor data. MXD from the Mohe site in this area was compared with estimates of NPP for 1982-1999 produced by the NDVI model, which was established based on the relationship of leaf area index (LAI) and NDVI. The result shows that the MXD series correlated significantly with the NDVI model estimates series, suggesting that MXD appeared to be an appropriate index for productivity or canopy growth in region where forest productivity is strongly temperature-related.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.11a
• /
• pp.135-136
• /
• 2014

지구온난화에 따른 이상기후현상을 해결하기 위해 인공위성영상을 이용한 식생의 변화유무와 특성파악이 중요하다. 특히, 인공위성의 근적외선 영역과 가시광선 영역을 이용한 정규식생분포지수는 식생의 활력도를 파악하고 변화유무를 판단하는 지표로서 많이 사용되고 있다. 하지만, 최근 발사된 Landsat 8 OLI의 경우 정규식생분포지수에 영향을 주는 근적외선 밴드의 파장대역이 기존의 TM/ETM+ 위성의 근적외선 밴드의 파장대역보다 감소하였다. 또한 이러한 파장대역 변화에 의한 정규식생분포지수의 차이에 대해서 공식적으로 연구한 사례가 없다. 그러므로 본 연구는 Landsat 8 OLI 위성영상과 Landsat 7 ETM+ 위성영상을 식생이 활발한 여름철(9월)과 그렇지 않은 겨울철(1월)의 영상을 각각 취득하여, 식생, 도심지, 도로, 농경지, 나지의 5가지 항목으로 분류하여 각각의 정규식생분포지수를 비교해보고 상관관계분석을 시도하였다.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1005-1005
• /
• 2003

The purpose of this study is to evaluate the potential application of TERRA-ASTER data in Thailand. ASTER VNIR, SWIR and TIR data covering greater Bangkok and Chiangmai province were processed with various techniques in the spatial domain to study the applicability to various disciplines. ASTER data was also combined with other satellite data in order to utilize multi-sensor methods. It was found that VNIR data can clearly identify urban pattern including road network and vegetation index. While SWIR and TIR data can well separate between urban and non urban area and TIR data can differentiate among thermal surfaces. Furthermore, dense urban areas such as central business area could be highlighted. Land utilization, vegetable distribution and differences of temperature distribution were investigated.

• Korean Journal of Remote Sensing
• /
• v.10 no.2
• /
• pp.63-82
• /
• 1994

Multitemporal analysis with remotely sensed data is complicated by numerous intervening factors, including atmospheric attenuation and occurrence of clouds that obscure the relationship between ground and satellite observed spectral measurements. A reconstruction system was developed to increase the discrimination capability for imagery that has been modified by residual dffects resulting from imperfect sensing of the target and by atmospheric attenuation of the signal. Utilizing temporal information based on an adaptive timporal filter, it recovers missing measurements resulting from cloud cover and sensor noise and enhances the imagery. The temporal filter effectively tracks a systematic trend in remote sensing data by using a polynomial model. The reconstruction system were applied to the AVHRR data collected over Korean Peninsula. The results show that missing measurements are typically recovered successfully and the temporal trend in vegetation change is exposed clearly in the reconstructed series.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.864-866
• /
• 2014

현대 사회는 모든 분야에서 다양한 분야들의 기술들이 융합되는 사회이다. 농업 분야 또한 다양한 기술들과의 융합으로 생산 관리와 생육관리 등에서도 변화가 요구되고 있다. 하지만 급속히 정보화가 추진되고 있는 다른 분야에 비해 농업분야는 생물을 다루는 분야이기 때문에 발전 속도가 늦다. 하지만 정보화는 어쩔 수 없는 당면 과제이기에 농업 종합 관리 시스템은 꼭 필요한 시스템이다. 현재의 농업 정보화 시스템은 농업관측정보시스템과 농산물 유통 종합정보 시스템 그리고 농축산물 생산 및 수급정보 분석 시스템 등으로 볼 수 있다. 하지만 이러한 시스템은 초기의 기대와는 달리 농업관측 모형이 현실을 제대로 반영하지 못하는 문제점 등이 있어 비효율적으로 운용되고 있다. 이에 본 연구에서는 식물의 다양한 생육과 생산 최적화를 위해 RFID 센서를 이용하여, 관리함으로서 적은 노동력과 시간의 소모를 줄이고 소비자가 작물에 대한 다양한 정보를 접할 수 있는 시스템을 연구한다.