• Journal of the Korean Wood Science and Technology
• /
• v.38 no.2
• /
• pp.140-148
• /
• 2010

This study was to investigate the enzymatic hydrolysis of cellulose using the cellulase from whole body of the native termite collected in Milyang-si, Kyungsangnamdo, Korea. In the results, optimal temperature and pH for the enzyme of native termites were $45^{\circ}C$ and pH 5.5 for both endo-${\beta}$-1, 4-glucanase and ${\beta}$-glucosidase. Enzyme activity of the termite enzyme was shown $8.8{\times}10^{-2}\;FPU/m{\ell}$. And the highest glucose hydrolysis rate of cellulose by the digestive enzyme from test termites was 24.5% based on the glucan, comparing 59.7% by commercial enzyme (only celluclast 1.5 L) at 1% (w/v) substrate and 36 hours in hydrolysis time. This hydrolysis rate by the digestive enzyme from test termites was comparatively high value in 41% level of the commercial enzyme. When cellulose was hydrolyzed by the digestive enzyme of the native termite, glucose hydrolysis was almost completed in 12 hours which was the considerably reduced time for cellulose hydrolysis. It was suggested that the quiet short reaction time for cellulose hydrolysis by the enzyme from native termite could be a very high advantage for development of hydrolysis cellulase for lignocellulosic biomass.

• The Korean Journal of Mycology
• /
• v.30 no.2
• /
• pp.109-112
• /
• 2002

Present experiments were conducted to determine the possibility of artificial culture with oak sawdust block of Phellinus gilvus Mushrooms, Mycelial growth in sawdust block (oak 90 + rice bran 10, V/N) after 25 days. It took 12 days to make fruitbody from burying of sawdust block to pinhead formation. The fruitbodies produced the total fresh weight 577 g (dried weight 97 g) in a block.

• Journal of Korean Society of Rural Planning
• /
• v.17 no.3
• /
• pp.27-41
• /
• 2011

This research The main focus of this research is to provide basic data for concrete recreation planning of future site by selecting Gwangmyeong-Siheung housing district, large residential development district focused on rural areas, by evaluation of recreation value and detailed biotope type classification. The main results of analysis are as follows. As a result of basic survey of the research area, total 79 family and 307 taxonomic groups are identified and also naturalization index and urbanization index were estimated 16.6 % and 17.6% respectively. Also, as a result of biotope type classification, it is divide into 12 biotope type gorups including forest biotope type group and its subordinate 53 biotop types. As a result of first value evaluation, there are total 13 biotope types such as vegetation-full artificial rivers in I grade. In addition it is analyzed as 9 types of II grade, 5 types of III grade, 8 types of IV grade, 18 types of V grade. Lastly, as a result of second evauation, it is analyzed that there are 21 special meaningful areas for recreation and natural experience(1a, 1b), and 50 meaningful areas for recreation and natural experience(2a, 2b, 2c). It is regarded that the results of biotope types classification and recreation value from this research play roles of analyzing the Suitable site for recreation area before development in terms of large residential development district, and then these results provide important basic data to secure recreational and natural experience area in development planning.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.380-380
• /
• 2013

본 논문에서는 외기 환경 요인 중에서 H2O와 O2의 영향으로 성능이 저하되는 유기박막트랜지스터(OTFT)의 수명시간 향상을 위하여 필요한 passivation layer의 효과에 대하여 알아 보았다. OTFT에 기존의 액상 공정이나 증착 공정으로 단일 passivation layer또는 다층 passivation layer를 형성하는 방식과는 다르게 향후에 산업 전반에 적용이 기대되는 것을 고려하여 제작 공정의 간편성을 위하여 film 형태로 되어 있는 열경화성 epoxy resin film으로 passivation layer를 구현하는 방법을 사용하여 OTFT의 storage stability를 평가하였다. passivation layer가 없는 OTFT와 열경화성 epoxy resin film으로 passivation된 OTFT의 전기적 특성이 서로 비교 평가되었으며 또한 30일 동안 온도 $25^{\circ}C$ 상대습도 40%의 환경을 갖는 Desicator 안에서 소자를 보관하여 시간에 따른 전기적 특성 변화를 검증하여 epoxy resin film의 passivation layer으로의 적용가능성을 검증하였다. 결과적으로 30일 후의 passivation layer가 없는 OTFT의 전기적 특성은 매우 낮게 떨어진 반면에 epoxy resin film으로 passivation layer가 구현된 OTFT의 mobility는 $0.060cm^2$/Vs, VT는 -0.18 V, on/off ratio는 $3.7{\times}10^3$으로 초기의 소자 특성이 잘 유지되는 결과를 얻었다. OTFT는 Flexible한 polyethersulfone (PES)기판에 게이트 전극이 하부에 있는 Bottom gate 구조로 제작되었고 채널 형성을 위한 유기반도체 재료로 6,13-bis (triisopropylsilylethynyl) (TIPS) pentacene이 사용되었고 spin coating된 Poly-4-vinylphenol (PVP)가 게이트 절연체로 사용되었다. 이때 Au전극은 Shadow mask를 이용하여 증착하였다. 또한 OTFT의 채널 길이 $100{\mu}m$, 채널 폭 $300{\mu}m$의 영역에 Drop casting법을 사용하여 채널을 형성하였다. 물리적 특성은 scanning electron microscopy (SEM), scanning probe microscopy (SPM), x-ray diffraction (XRD)를 사용하여 분석하였고, 전기적 특성은 Keithley-4200을 사용하여 추출하였다.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.4
• /
• pp.716-721
• /
• 2005

The role of an effective microbial species is critical to the successful application of biological processes to remove sulfur compounds. A bacterial strain was isolated from the soil of a malodorous site and identified as Burkholderia spp. This isolate was able to oxidize thiosulfate to sulfate, with simultaneous pH decrease and accumulation of elemental sulfur. The specific growth rate and the sulfate oxidation rate using the thiosulfate basal medium were $0.003 h^{-1}\;and\;3.7 h^{-1}$, respectively. The isolated strain was mixotrophic, and supplementation of $0.2\%$ (w/v) of yeast extract to the thiosulfate-basal medium increased the specific growth rate by 50-fold. However, the rate of sulfate oxidation was more than ten times higher without yeast extract. The isolate grew best at pH 7.0 and $30^{\circ}C$, and the sulfate oxidation rate was the highest at 0.12 M sodium thiosulfate. In an upflow biofilter, the isolated strain was able to degrade $H_2S\;with\;88\%$ efficiency at 8 ppm and 121/h of incoming gas concentration and flow rate, respectively. The cell density at the bottom of the column reached $3.2{\times}10^8$ CFU/(g bead) at a gas flow rate of 121/h.

• Journal of Biomedical Engineering Research
• /
• v.29 no.6
• /
• pp.493-501
• /
• 2008

In this paper, a novel system is proposed to measure skin hydration using the susceptance method. This system largely consists of a low-voltage(${\pm}2.6$ V) driven circuit and minimized electrodes of size($5{\times}5mm^2$). To evaluate the accuracy of the novel system in measuring skin hydration, skin hydration values from 105 subjects are measured by the proposed system. The measurements are then compared to those obtained by the golden reference device based on the capacitance method in terms of Intraclass Correlation Coefficient(ICC) and correlation coefficient. All measurements are performed on 7 sites, which are forehead, Crow's foot, cheek, chin, volar forearm, dorsal forearm, and back of the hand, in a room where the temperature and humidity are maintained at an uniform level of $22{\pm}2^{\circ}C$ and $50{\pm}5%$, respectively. ICC values are above 0.9(p=0.001), signifying that the skin hydration values measured by the two methods show a good level of reliability. Correlation coefficient between the two methods is also 0.562(p=0.001). Based on these results, it is expected that the proposed system may be applicable in a variety of clinical or cosmetic areas.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.10
• /
• pp.1425-1434
• /
• 2008

The study was conducted to evaluate and compare the effects of feed additives on ruminal fermentation, nutrient digestibility and performance of lambs fed diets containing 60% wet brewers grains (WBG). In Experiment 1, two simultaneous trials were conducted. Fifty intact ($20.2{\pm}0.8kg\;BW$) lambs were used in a feedlot trial and 10 (rumen cannulated; $32{\pm}1kg\;BW$) in a digestion trial. The pH, volatile fatty acids (VFA) and ammonia-N in lambs were also estimated. Lambs were randomly assigned to one of five diets: i) without additives (Con), ii) with 1% bicarbonate (Bic), iii) with 1% bentonite (Ben), iv) with 33 mg/kg monensin (Mon) and v) with 200 mg/kg fibrolityc enzymes (Enz). In Experiment 2, 120 RambouilletPelibuey intact male lambs ($19.5{\pm}1.5kg\;BW$) were used in a feedlot trial and randomly assigned to four diets: i) without additives (control), ii) with 1% Bic, iii) with 33 mg/kg Mon and iv) with 1% Bic and 33 mg/kg Mon. In Experiment 1, lambs fed diets containing Bic or Mon had significantly higher final weight, DMI, ADG than other lambs. However, apparent DM, OM, CP, NDF and ADF digestibilities and ruminal individual VFA content were similar (p>0.05) among treatments. Conversely, treatmentcollection period interaction was significant for ruminal pH and NH3. In Experiment 2, lambs fed diets containing a Bic and Mon combination had significantly higher final weight, DMI and ADG. It is concluded lambs fed Bic or Mon or Bic and Mon combination had better performance characteristics than lambs on Ben or Enz.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.5
• /
• pp.483-493
• /
• 2011

An acid phosphatase (HppA) activated by $NH_4Cl$ was purified 192- and 34-fold from the periplasmic and membrane fractions of Helicobacter pylori, respectively. SDS-polyacrylamide gel electrophoresis revealed that HppA from the latter appears to be several kilodaltons larger in molecular mass than from the former by about 24 kDa. Under acidic conditions (pH${\leq}$4.5), the enzyme activity was entirely dependent on the presence of certain mono- and/or divalent metal cations (e.g., $K^+$,$ NH_4{^+}$, and/or $Ni^{2+}$). In particular, $Ni^{2+}$ appeared to lower the enzyme's $K_m$ for the substrates, without changing $V_{max}$. The purified enzyme showed differential specificity against nucleotide substrates with pH; for example, the enzyme hydrolyzed adenosine nucleotides more rapidly at pH 5.5 than at pH 6.0, and vice versa for CTP or TTP. Analyses of the enzyme's N-terminal sequence and of an $HppA^-$ H. pylori mutant revealed that the purified enzyme is identical to rHppA, a cloned H. pylori class C acid phosphatase, and shown to be the sole bacterial 5'-nucleotidase uniquely activated by $NH_4Cl$. In contrast to wild type, $HppA^-$ H. pylori cells grew more slowly. Strikingly, they imported $Mg^{2+}$ at a markedly lowered rate, but assimilated urea rapidly, with a subsequent increase in extracellular pH. Moreover, mutant cells were much more sensitive to extracellular potassium ions, as well as to metronidazole, omeprazole, or thiophenol, with considerably lowered MIC values, than wild-type cells. From these data, we suggest that the role of the acid phosphatase HppA in H. pylori may extend beyond 5'-nucleotidase function to include cation-flux as well as pH regulation on the cell envelope.

• Transactions of Materials Processing
• /
• v.27 no.4
• /
• pp.250-256
• /
• 2018

Oxygen-free copper (OFC) was prepared as a 90 mm cube and then processed with Multi-Axial Diagonal Forging - Initialization of Prior manufacturing History (MADF). The MADF process has been newly developed as a severe plastic deformation method. The MADF process consists of upset forging with a thickness reduction of 30% and diagonal forging with a diagonal angle of $135^{\circ}$. 1 cycle process consists of a 12 passes forging process. In order to analyze the characteristic changes according to the number of iterations, 1, 2, and 3 cycles of the MADF process were performed. The OFC specimens were MADF processed without surface cracks up to 3 cycles. The microstructure, hardness and tensile test of processed materials were analyzed to study the change of material properties according to the amount of MADF process. The results showed that the MADF process effectively refined the microstructure and increased the strength of OFC. In the case of specimens processed for more than 2 cycles, the grains of all measurement regions were refined to be less than $7{\mu}m$ of grain size. The 1 cycle MADF processed OFC showed the highest mechanical properties with the hardness of 132 HV and tensile strength of 395 MPa. Hardness and strength seemed to be saturated when processed over 2 cycles.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.2
• /
• pp.36-44
• /
• 2013

The objectives of this study were to identify the characteristics of shallow groundwater from the oil-contaminated site for a long period and to evaluate the applicability of biopile technology to treat the soil excavated from it. The eight monitoring wells were installed in the contaminated site and pH, Electrical Conductivity (EC), Dissolved Oxygen (DO), Oxidation Reduction Potential (ORP), Temperature and the concentrations of major ions and pollutants were measured. The VOCs in soil gas were monitored during biopile operation and TPH concentration was analyzed at the termination of the experiment. The pH was 6.62 considered subacid and EC was 886.19 ${\mu}S/cm$. DO was measured to be 2.06 mg/L showing the similar characteristic of deep groundwater. ORP was 119.02 mV indicating oxidation state. The temperature of groundwater was measured to be $16.97^{\circ}C$. The piper diagram showed that groundwater was classified as Ca-$HCO_3$ type considered deep groundwater. The ground water concentration for TPH, Benzene, Toluene, Xylene of the first round was slightly higher than that of the second round. The concentration of carbon dioxide of soil gas was increased to 1.3% and the concentration of VOCs was completely eliminated after the 40 days. The TPH concentration showed 98% remediation efficiency after the 90 days biopile operation.