• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.100-106
• /
• 2017

In this paper, we propose a parallel optimization method of Aho-Corasick (AC) algorithm and Parallel Failureless Aho-Corasick (PFAC) algorithm using Open Computing Language (OpenCL) on Field Programmable Gate Array (FPGA). The low throughput of string matching engine causes the performance degradation of network process. Recently, many researchers have studied the string matching engine using parallel computing. FPGA's vendors offer a parallel computing platform using OpenCL. In this paper, we apply the AC and PFAC algorithm on DE1-SoC board with Cyclone V FPGA, where the optimization that considers FPGA architecture is performed. Experiments are performed considering global id, local id, local memory, and loop unrolling optimizations using PFAC algorithm. The performance improvement using loop unrolling is 129 times greater than AC algorithm that not adopt loop unrolling. The performance improvements using loop unrolling are 1.1, 0.2, and 1.5 times greater than those using global id, local id, and local memory optimizations mentioned above.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.1
• /
• pp.29-37
• /
• 2020

Purpose: The purpose of the research is to find difficulty levels of LEED credits in each LEED level based on credits achievement in order to find important of LEED-HC credits to gain LEED-HC. Methods: The individual credits of LEED-HC v.2009 scorecards from USGBC website are analyzed. With achieved scores rate of LEED credits per each Level, all credits are reassembled in 4 different ranges (A~D); easy (A), easy-moderate (B), moderate-hard (C) and hard (D) to achieve scores. Results: 1) Achieved point rate in LEED-HC specific credits are low. These credits need to be reviewed carefully. 2) In 88 projects, 37 projects are gained Silver level which is more than projects in certification level. In order to encourage to gain LEED-HC level, Average Achieved rate to earn Certificate level needs to be risen. 3) Credits in range D rarely affect to gain platinum level. EAc1 (24 points) are critical to gain Silver and Gold level. However, EAc1 points are not effective to achieve Certificate level. Implications: This research will provide a fundamental back data to set up Korean Green building rating system for Healthcare.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.61-62
• /
• 2006

In this paper, it was demonstrated that organic thin- film transistors (OTFTs) were fabricated with the organic adhesion layer between an organic semiconductor and a gate insulator by vapor deposition polymerization (VDP) processing. In order to form polymeric film as an adhesion layer, VDP process was also introduced instead of spin-coating process, where polymeric film was co-deposited by high-vacuum thermal evaporation from 6FDA and ODA followed by curing. The saturated slop in the saturation region and the subthreshold nonlinearity in the triode region were c1early observed in the electrical output characteristics in our organic thin film transistors using the staggered-inverted top-contact structure. Field effect mobility, threshold voltage, and on-off current ratio in 15-nm-thick organic adhesion layer were about $0.5\;cm^2/Vs$, -1 V, and $10^6$, respectively. We also demonstrated that threshold voltage depends strongly on the delay time when a gate voltage has been applied to bias stress.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.4
• /
• pp.183-188
• /
• 2016

This paper presents the design and characterization of wide band ohmic microswitch with an actuation voltage as low as 20~25 V, and a restoring force of 14.1 μN. The design of the proposed switch is primarily composed of an electrostatic actuator, bridge membrane, cantilever (beam) and coplanar waveguide, suspended over the substrate. The analysis shows an insertion loss of −0.002 dB at 1GHz and remains as low as −0.35 dB, even at 100 GHz. The isolation loss of the switch is sustained at −21.09 dB at 100GHz, with a peak value of −99.58 dB at 1 GHz and up-state capacitance of 4 fF. To our knowledge, this is the first demonstration of a series contact switch, which works over a wide bandwidth (DC-100 GHz) and with such a high and sustained isolation, even at high frequencies and with an excellent figure of merit (f_c=1/2.pi.Ron.Cu= 39.7 THz).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.6
• /
• pp.480-485
• /
• 2011

ZnO is an n-type semiconductor with a wide band gap near 3.37 eV. It was known that ZnO films with a resistivity of the order of $10^{-4}\;{\Omega}cm$ is not easy to obtain. 1, 3, and 5wt% Si element were added into ZnO in ordre to improve the electrical and optical characteristics. The Si-doped ZnO (SZO) was grown on a glass substrate by radio frequency (RF) magnetron sputtering at the temperature range from 100 to $500^{\circ}C$. X-ray diffraction (XRD) patterns of SZO film showed preferable crystal orientation of (002) plane. It was confirmed that the lowest resistivity of the SZO films was $2.44{\times}10^{-3}{\Omega}cm$ and SZO films were significantly influenced by the working temperature. The average transmittance of the films was over 80% in the visible ranges.

• Korean Journal of Materials Research
• /
• v.27 no.12
• /
• pp.695-698
• /
• 2017

ZnMgBeGaO/Ag/ZnMgBeGaO multilayer structures were sputter grown and characterized in detail. Results indicated that the electrical properties of the ZnMgBeGaO films were significantly improved by inserting an Ag layer with proper thickness (~ 10 nm). Structures with thicker Ag films showed much lower optical transmission, although the electrical conductivity was further improved. It was also observed that the electrical properties of the multilayer structure were sizably improved by annealing in vacuum (~35 % at $300^{\circ}C$). The optimum ZnMgBeGaO(20nm)/Ag(10nm)/ZnMgBeGaO(20nm) structure exhibited an electrical resistivity of ${\sim}2.6{\times}10^{-5}{\Omega}cm$ (after annealing), energy bandgap of ~3.75 eV, and optical transmittance of 65 % ~ 95 % over the visible wavelength range, representing a significant improvement in characteristics versus previously reported transparent conductive materials.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.2
• /
• pp.61-70
• /
• 1994

This study was executed to find the applicability of press drying of tree disk by investigating the shrinkage and drying defect and to form appropriate model by comparing the actual moisture content(MC) and internal temperature in respect of drying time with calculated values based computer simulation to which was applied finite difference method. In press drying disk, heating period, constant drying rate period maintained plateau temperature at 100$^{\circ}C$ and falling drying rate period were significantly distinguished. Actual MC and internal temperature were analogous to those calculated at comparing points. Heat transfer model formed by Fourier's law using specific heat of moist wood and conduction coefficient considering fractional volume of each element of wood cell wall, bound water, free water and air showed applicability as basic data to developing heat expansion, shrinkage and drying stress during press drying. Also mass transfer model formed by Fick's diffusion law using water vapor diffusion coefficient showed applicability. Longitudinal shrinkage was developed by pressure of hot press and tangential shrinkage was restrained by hygrothermal recovery. The heart check, surface check and ring failure were occurred differently in species, but V-shaped crack didn't develop.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.2
• /
• pp.255-259
• /
• 2004

Post-infectional biochemical changes due to Xanthomonas campestris pv. mori (Xcm) infection in five elite mulberry varieties viz., $S_1$, $S_{1635}$, $V_1$, RF $S_{175}$ and JRH was studied under inoculated condition. It was revealed that total soluble sugar and protein content was significantly declined in all the varieties due to X. campestris infection. Total phenol content was at par prior to inoculation in all varieties, but it was significantly increased in $S_1$, RF $S_{175}$, $S_{1635}$ and JRH 7 days after inoculation. The correlation coefficient (r) between total soluble sugar and total phenol content was found positive (r = 0.825) and statistically significant. Similarly, correlation coefficient (r) between total soluble protein and phenol content was found positive (r = 0.897) and statistically significant. The present study indicates that X. campestris infected leaves are nutritionally inferior in quality and the duration of phenol production in a mulberry variety play decisive role on disease resistance.nce.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.4 s.28
• /
• pp.486-494
• /
• 1989

Lead, iron, and zinc concentrations in whole blood were determined by atomic absorption spectrophotometry, using a simple one-step dilution procedure, which were measured in 3 groups, 98 officers unexposed to dust or to metal, 58 coal miners without pneumoconiosis, and 113 coal workers' pneumoconiosis (CWP) patients. The results were as follows : 1. The precisions (C. V.%) of lead, iron, and zinc in blood were $12.65{\pm}6.95%,\;1.47{\pm}1.25%\;and\;6.35{\pm}3.34%$, respectively. 2. Lead and zinc in blood showed the log-normal distribution unlike iron in blood which showed normal distribution. 3. Lead, iron, and zinc concentrations in blood of 3 groups were follows : There was significant difference of concentration for zinc in blood by groups statistically. 4. The difference of lead, iron, and zinc concentrations in blood was not significant (p>0.05) by profusion on chest radiographs.

• Mass Spectrometry Letters
• /
• v.5 no.3
• /
• pp.89-93
• /
• 2014

Lincomycin is one of the major species among the Pharmaceuticals and Personal Care Products (PPCPs) detected from the four major rivers in Korea. The structure characterization was performed of six degradation products of lincomycin formed under the irradiation of electron beam, and the degradation efficiency as a function of the various irradiation dose and sample concentration was investigated. Electron beam (10 MeV, 0.5 mA and 5 kW) experiments for the structural characterization of degradation products that are fortified with lincomycin, were performed at the dose of 10 kGy. The separation of degradation products and lincomycin was carried out using a C18 column ($2.1{\times}100$ mm, $3.5{\mu}m$), using gradient elution with 20 mM ammonium acetate and acetonitrile. The structures of six degradation products of lincomycin were proposed by interpretation of mass spectra and chromatograms by LC-MS/MS. The mass fragmentation pathways of mass spectra in tandem mass spectrometry were also proposed. Experiments were performed of the degradation efficiency as a function of the irradiation dose intensity and the initial concentration of lincomycin in an aqueous environment. In addition, increased degradation efficiency was observed with a higher dose of electron beam and lower concentration.