• Korean Journal of Materials Research
• /
• v.6 no.5
• /
• pp.483-488
• /
• 1996

InP 기판위에 InP와 격자정합된 undoped-InGaAs에서 zine의 확산 특성을 Electrochemical Capacitance-Voltage 법(polaron)과 Secondary Ion Mass Spectrometry(SIMS)로 조사하였다. Metallorganic Chemical Vapor Deposition (MOCVD)를 이용하여 undoped-InGaAs 층을 성장시켰으며 확산방법으로는 Zn3P2 확산원 박막과 Rapid Thermal Annealing (RTA)를 이용하였다. 450-55$0^{\circ}C$온도범위에서 30-300초 동안 확산을 수행한 결과 zinc의 확산계수는 D=Doexp(-$\Delta$E/kT)의 특성을 만족하였으며, Do와 $\Delta$E는 각각 1.3x105$\textrm{cm}^2$/sec와 2.3eV였다. 얻어진 확산계수는 다른 확산방법을 이용한 값들에 비해 매우 큰 값인데, 이것은 RTA 처리시 빠른 온도 증가에 의한 확산원 박막, 보호막, 그리고 InGaAs 에피층이 가지는 열팽창계수의 차이로인한 응력의 효과에 의한 것으로 생각되며, 이를 sealed-ampoule 법을 사용한 경우의 확산특성과 비교를 통하여 확인할 수 있었다.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.319-323
• /
• 1998

Conversion of Gardenia jasminoides yellow pigment into blue-green pigment by 8 bacterial species was examed. Bioconversion pattern can be categorized into three types according to absorption spectra characteristics. The same pattern of the value of ${\Delta}E$ estimated by color differencemeter was also observed. Conversion rate by S. epidermidis was faster than other bacterial species. It took 16 hour for S. epidermidis to convert pigment at $37^{\circ}C$. Gardenia jasminoides yellow pigment and conversion pigment were completely separated by Amberlite XAD column chromatography with $H_2O-MeOH$ solvent system. Storage stability of the conversion pigment was better than Gardenia jasminoides yellow pigment.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1714-1715
• /
• 2011

In this work, highly conductive organic solvent-based polyaniline(PANI) was used as an anode in organic photovoltaic cells (OPV) based on poly - (3-hexylthiophene) and [6,6] - phenyl - C60 - butyricacid methyl ester (P3HT : PCBM). The transmittance of the used PANI film were 87.67% and 86.57% at 550nm, and its sheet resistance were 454 ${\Omega}/{\Box}$ and 298 ${\Omega}/{\Box}$. We fabricated ITO-free OPV cells using PANI as an anode, which exhibited an external power conversion efficiency of 2.28% with a result of Jsc of 6.922mA/cm2, Voc of 0.6093V, and FF of 54.10% under an illumination of air mass(AM) 1.5G (100mW/$cm^2$). We used ink-jet printing to deposit buffer layer and active layer on a glass substrate.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.5
• /
• pp.370-373
• /
• 2011

We investigated the effects of low temperature ($500^{\circ}C$) $O_2$ annealing on the characteristics of hafnium silicate ($HfSi_xO_y$) films deposited on a Si substrate by atomic layer deposition (ALD). We found that the post deposition annealing under oxidizing ambient causes the oxidation of residual Hf metal components, resulting in the improvement of electrical characteristics such as flat band voltage shift (${\Delta}V_{fb}$) by hysteresis without oxide capacitance reduction. We suggest that post deposition annealing under oxidizing ambient is necessary to improve the electrical characteristics of $HfSi_xO_y$ films deposited by ALD.

• The KIPS Transactions:PartA
• /
• v.10A no.6
• /
• pp.671-676
• /
• 2003

In this paper, we proposed a new First Partial product Addition (FPA) architecture with new compressor (or parallel counter) to CSA tree built in the process of adding partial product for improving speed in the fast parallel multiplier to improve the speed of calculating partial product by about 20% compared with existing parallel counter using full Adder. The new circuit reduces the CLA bit finding final sum by N/2 using the novel FPA architecture. A 5.14nS of multiplication speed of the $16{\times}16$ multiplier is obtained using $0.25\mu\textrm{m}$ CMOS technology. The architecture of the multiplier is easily opted for pipeline design and demonstrates high speed performance.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.822-824
• /
• 1998

The lithium polymer battery with polymer electrolyte is expected as a safe and long cycle life battery. This paper reports primarily the recent development results of a solid polymer electrolyte, which is a key point of the secondary battery system. The new type of polymer electrolyte was prepared under a dry Ar atmosphere by dissolving $LiCIO_4$ in a matrix of EC, PC and then dispersing polyacrylonitrile(PAN). Also adding some inorganic filler $Al_2O_3$. The dispersed solution heated at $120^{\circ}C$. The polymer electrolyte were characterized by EIS(Electrochemical Impedance Spectroscopy), TGA(Thermo Gravimetric analysis), DMA(Dynamic Mechanical Analyzer), DSC (Differential Scanning Calorimetry). The lithium ion yield is 0.29 when PAN-$Al_2O_3$ which was applied DC 5mV. The ionic conductivity of PAN, PAN-$Al_2O_3$ polymer electrolytes were showed $1.0{\times}10^{-4}S/cm$, $8.4{\times}10^{-4}S/cm$ at room temperature. When inorganic filler was added in the polymer electrolyte, ionic conductivity and lithium yield more larger than without inorganic filler.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.10a
• /
• pp.154-157
• /
• 2006

ITO(indium tin oxide)/glass 기판 위에 PEDOT:PSS[poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)]와 PVK[poly(N-vinyl carbazole)] 고분자 물질을 정공 주입 및 수송층으로, 발광층으로 PFO-poss[Poly(9,9-dioctylfluorenyl-2,7-diyl) end capped with POSS]를 사용하여 스핀코팅법과 열 증착법으로 ITO/PEDOT:PSS/PVK/PFO-poss/LiF/Al 구조의 고분자 발광 다이오드를 제작하였다. PFO-poss 유기발광 층의 열처리 조건 (온도, 시간)이 PLED 소자의 전기적, 광학적 특성에 미치는 영향을 조사하였다. 1 wt%의 농도를 갖는 PFO-poss 유기물 발광 층을 200C 온도로 3시간 열처리 할 경우 11 V 인가전압에서 $1497\;cd/m^2$의 최대 휘도를 나타내었다. 동일온도에서 열처리 시간을 1시간에서 3시간으로 증가시킬 경우 휘도의 증가와 함께 발광 개시온도가 감소하는 경향을 보여주었다. 또한 열처리 온도와 시간을 증가시킬 경우 제2발광피크인 excimer 피크가 크게 나타났으며 청색에서 황색 발광 쪽으로 천이되는 경향을 나타내었다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.61.1-61.1
• /
• 2011

본 연구에서는 Zinc Tin Oxide (ZTO)/Ag/ZTO 다층 투명 전극을 제작하고 이를 비정질 ZTO (a-ZTO) 채널을 기반으로 한 TFT에 적용하여 투명 TFT의 전기적 특성을 확인하였다. 15${\times}$15 mm 크기의 ITO (gate)/Glass 기판상에 ALD법으로 투명 $Al_2O_3$절연층을 형성하고, RF sputtering법으로 50nm 두께의 a-ZTO 채널층을 형성하였다. 열처리를 위하여 Hot plate를 이용해 대기 중에서 $300^{\circ}C$의 온도로 20분간 열처리하여 채널 특성을 최적화 하였다. 이후 투명 Source/Drain으로 ZTO/Ag/ZTO 다층 투명 전극을 DC/RF sputtering법으로 패터닝하여 투명 TFT를 완성하였고, 평가를 위해 금속 (Mo)을 Source/Drain으로 사용한 TFT를 제작하여 그 성능을 비교하였다. ZTO/Ag/ZTO 다층 투명 전극은 Ag의 삽입으로 인하여 3.96ohm/square의 매우 낮은 면저항과 $3.24{\times}10-5ohm-cm$의 비저항을 나타내었으며, Antireflection 효과에 의해 가시광선 영역 (400~600 nm)에서 86.29%의 투과율을 나타내었다. ZTO/Ag/ZTO 다층 투명 전극 기반 투명 TFT는 $6.80cm^2/V-s$의 이동도와 $8.2{\times}10^6$의 $I_{ON}/I_{OFF}$비를 나타내어 금속 Source/Drain 전극에 준하는 특성을 나타내었다. 뿐만 아니라 전체 소자의 투과도 또한 ~73.26% 수준을 나타내어 투명 TFT용 Source/Drain 전극으로서 ZTO/Ag/ZTO 다층 투명 전극의 가능성을 확인하였다.

• Korean Journal of Crystallography
• /
• v.15 no.1
• /
• pp.40-43
• /
• 2004

The peptide deformylase from the pathogenic bacterium Staphylococcus aureus has been over-expressed in Escherichia coli and crystallized in the presence of the inhibitor actinonin at 297 K using polyethylene glycol 20000 as a precipitant. X-ray diffraction data have been collected to 2.2 ${\AA}$ resolution. The crystal is trigonal, belonging to the space group $P3_121$ (or its enantiomorph $P3_221$), with unit cell parameters of a = b = 62.70 ${\AA}$ c = 108.23 ${\AA}$, ${\alpha}\;=\;{\beta}\;=\;90^{\circ},\;and\;{\gamma}\;=\;120^{\circ}$. An asymmetric unit contains a monomer of the recombinant enzyme, giving a $V_M$ of 2.84 ${\AA}^3\;Da^_{-1}$ and a solvent content of 56.7%.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.57.1-57.1
• /
• 2016

Methanol ($CH_3OH$) is a key species in the formation of complex organic molecules. We report the first detection of solid $CH_3OH$ in a line of sight toward the Galactic center (GC) region, based on L-band spectra taken with the Subaru telescope, aided by L'-band imaging data and moderate-resolution spectra from NASA/IRTF. It is found toward a background star, ~8000 AU in projected distance from a newly discovered massive young stellar object (YSO). This YSO also exhibits a strong $CO_2$ ice absorption band at ${\sim}15{\mu}m$ in Spitzer/IRS data, which has a prominent long-wavelength wing. It confirms that a high $CH_3OH$ abundance is responsible for the broad $15{\mu}m$ $CO_2$ ice absorption towards massive YSOs in the GC. Clearly, $CH_3OH$ formation in ices is efficient in the GC region, as it is in star-forming regions in the Galactic disk. We discuss implications of our result on the astrochemical processes in the hostile GC molecular clouds.