• Publications of The Korean Astronomical Society
• /
• v.12 no.1
• /
• pp.99-109
• /
• 1997

We obtained the CN($\Delta_V=0$) and $C_2(\Delta_V=0,\;\pm1$) spectra of comet Hale-Bopp(C/1995 O1) at the Kyunghee Observatory and Bohyunsan Astronomical Observatory between March 7 and May 12, 1997 The fluxes for each molecular band were measured and then the production rates and column densities of CN and $C_2$ were calculated using a simple model. The resultantproduction rates of CN and $C_2$ are logQ(CN)=27.4 at r=0.94 AU(preperihelion) and $logQ(C_2)=27.3$ at r=0.94 AU(postperihelion), respectively.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.3
• /
• pp.320-324
• /
• 1997

The number of Vivrio vulnificus strain 29307 was assessed for oysters treated with acetic, lactic, citric, and alginic acids during storage at 15$^{\circ}C$. When oysters were dipped with 0.5% acetic, 0.5% lactic, or 0.5% citric acids for 3 min, V. vulnificus was not detected after 4 days of storage. V. vulnificus in the treatment of 3% alginic acid (AL) containing 2% acetic acid (AA) was not detected after 2 days of storage, while it was isolated in the controls for 4 days of storage. Based on these results, the combination of AL and AA was more effective for preventing the growth of V. vulnificus in oysters than the treatments of the acid alone.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.58-61
• /
• 2001

Metal-insulator-semiconductor (MIS) C-V properties with high dielectric AIN thin films showed no hysteresis and good interface properties. The dielectric constant of the AIN film calculated from the capacitance at the accumulation region in the capacitance-voltage(C-V) characteristics was about 8. The C-V characteristics of MFIS capacitor showed a hysteresis loop due to the ferroelectric nature of the LiNbO$_3$ thin films. Typical dielectric constant value of LiNbO$_3$ film of MFIS device was about 23. The memory window width was about 1.2V at the gate voltage of $\pm$5 V ranges. Typical gate leakage current density of the MFIS structure was the order of 10$^{-9}$ A/cm$^2$ at the range of within $\pm$500 kV/cm. The ferroelectric capacitors showed no polarization degradation up to about 10$^{11}$ switching cycles when subjected to symmetric bipolar voltage pulse(peak-to-peak 8V, 50% duty cycle) in the 500kHz.

• Journal of the Korean Vacuum Society
• /
• v.19 no.3
• /
• pp.199-205
• /
• 2010

The electrical properties and defect states in ZnO substrates were studied during high-energy electron beam irradiations. 1 MeV and 2 MeV electron-beam with dose of $1{\times}10^{16}$ electrons/$cm^2$ were irradiated on Zn-surface of the sample. In the sample irradiated by 1 MeV, the leakage current was increased by electron-beam induced surface defects, while the enhancement of on/off property and the decrease of leakage current appeared in the 2 MeV irradiated sample. From the deep level transient spectroscopy measurements for these samples, it showed that the defect states with the activation energies of $E_c$-0.33 eV and $E_v$+0.8 eV are generated during the high energy electron-beam irradiation. Especially, it considered that the $E_c$-0.33 eV state related with O-vacancy affects to their electrical properties.

• Clinical and Experimental Vaccine Research
• /
• v.13 no.3
• /
• pp.253-258
• /
• 2024

Purpose: The immunogenicity of vaccines containing the canine adenovirus (CAdV) type 2 (CAdV-2) variant has not yet been reported. We prepared a novel inactivated CAdV-2 variant vaccine using the CAV2232-41 strain, and evaluated its safety and immunogenicity in raccoon dogs. Materials and Methods: The growth kinetics of CAV2232-41 were determined using Madin-Darby Canine Kidney (MDCK) cells. The nucleotide sequences of CAV2232 and CAV2232-41 were determined by next-generation sequencing. To generate the CAdV-2 variant vaccine, CAV2232-41 propagated in the MDCK cells was inactivated with 0.1% formaldehyde. Two vaccines were prepared by blending inactivated CAV2232-41 with Cabopol and Rehydragel adjuvants. Safety and immunogenicity of the CAV2232C and CAV2232R vaccines were evaluated in guinea pigs. Safety and immunogenicity of the CAV2232C vaccine were also evaluated in raccoon dogs. The virus neutralizing antibody (VNA) titer against CAV2232-41 was measured in sera collected from immunized guinea pigs and raccoon dogs. Results: CAV2232-41 showed the highest viral titer on days 4-6 post-inoculation and had a deletion in the E3 gene, which was confirmed as a CAdV-2 variant. Guinea pigs inoculated with CAV2232C showed slightly higher VNA titers than those inoculated with CAV2232R 2 weeks after booster vaccination. Raccoon dogs immunized with the CAV2232C vaccine developed high mean VNA titers, while non-vaccinated raccoon dogs were antibody-negative. Conclusion: The CAV2232C vaccine is safe and induces a protective VNA titer in raccoon dogs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.458-461
• /
• 2015

In this paper 2 types of voltage references and a current reference suitable for low-voltage, low-power circuits are proposed and designed with $0.35{\mu}m\;CMOS$ process. MOS transistors operating in weak inversion and bulk-driven technique are utilized to achieve low-voltage and low-power features. The first voltage reference consumes 1.43uA from a supply voltage of 1.2V while it has a reference voltage of 585mV and a TC(Temperature Coefficient) of $6ppm/^{\circ}C$. The second voltage reference consumes 48pW from a supply voltage of 0.3V while having a reference voltage of 172mV and a TC of $26ppm/^{\circ}C$. The current reference consumes 246nA from a supply voltage of 0.75V with a reference current of 32.6nA and a TC of $262ppm/^{\circ}C$. The performances of the designed references have been verified through simulations.

• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.2
• /
• pp.62-75
• /
• 1986

An experimental investigation of the machining characteristics such as cutt- ing resistance, surface roughness and tool wear in turning the test pieces of SM45C steel with both coated and uncoated carbide tool tips under various cutting conditions was conducted. Also a specially designed simple vibration damping device was experimentally evaluated for its effectiveness on machined surface roughness and a vibration test was conducted to confirm its ability to reduce the amplitude. Based on these tests finding, the following conclusions are made; 1. The cutting resistance($\textrm{p}_{1}$) increases as the depth of cut(d) increases at fixed feed rate(f) over the cutting speed(v) range of 43-226 m/min and p decreses about 18% average when V is increased for fixed d and f. At V= 226m/min, $\textrm{p}_{1}$/for A, C tips are about the same level but $\textrm{p}_{1}$ for B tip is 15% less than A, C tips. 2. The specific cutting resistance(Ks) at V=226 m/min was derived for A, B, C tips respectively and the value of Ks for B rip is about 20% less than A, C tips. 3. The surface roughness(Ra) improves significantly as the cutting speed(V) is increased and this effect was greater when V>100 m/min. On the other hand, Ra deteriorates as the feed rate(f) is increased and this trend was accelerated when f>0.3 mm/rev. With regard to the difference of Ra values among A, B, C tips, at V=226m/min, d=0.4mm, and f=0.31-0.61mm/rev, Ra values for B.C tips are about 17% less than tip A. 4. The experimental tool wear equations were derived for A, B, C tips and from these equations, the tool life($\textrm{T}_{\textrm{L}}$) baced on the I.S.O. criteria was calculated to be $\textrm{T}_{\textrm{L}}$<$\textrm{T}_{\textrm{LB}}$<$\textrm{T}_{\textrm{LC}}$ for both flank wear($\textrm{V}_{\textrm{B}}$) and boundary wear($\textrm{V}_{\textrm{N}}$). Hence, the coated tips are superior to the uncoated tip and tip C is considered to be the best. 5. The cutting resistance may be slightly reduced and the surface rounghness improved when the damper is used especially when V>100 m/min. Therefore this damping device is considered to be effective and practical. The experimental surface roughness equations were also derived. Based on the vibration test, it is established that the surface roughness improvement was the result of amplitude reduction made possible by the damper.

• Journal of Embryo Transfer
• /
• v.13 no.3
• /
• pp.207-212
• /
• 1998

This study was conducted to determined if single subcutaneous (s.c.) injection of Folltropin-V dissolved in polyethyleneglycol (PEG) can replace as the standard multiple intramuscular (i.m.) injection. The results suggest that the s.c. treatment produced more corpora lutea, embryos recovered and transferable embryos as compared to the i.m. treatment (p<0.05). This study indicates that a single s.c. injection of Folltropin-V dissolved in PEG was effective for superovulatory response and embryo yield in Korean cattle.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.767-770
• /
• 2003

A SiGe HBT MMIC differential VCO has been developed for C-band wireless LAN applications. The VCO produces -6.4 dBm output power at 4.75 GHz. The VCO exhibits a 490 MHz tuning range with control voltage from 0.5 V to 2.5 V. The phase noise of the VCO exhibits -106.5 dBc/Hz at 1 MHz offset from the 4.75 GHz carrier. The total current consumption of the VCO is 10 mA at a supply voltage of 3 V.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.473-476
• /
• 1999

PMOS capacitors with Ce-policide electrode were fabricated by the SADS method to study the effects of activation condition on the C-V characteristics. For the activation temperature of $600^{\circ}C$ , the capacitor using CoSi$_2$ formed from Co/Ti bilayer as diffusion source showed excellent C-V properties and the increase in V$_{th}$ with the increasing activation time. But impurties into the oxide.e.