• 제목/요약/키워드: V.A.S

검색결과 11,889건 처리시간 0.039초

Offset 구조 Poly-Si TFT의 Negative Bias Stress 효과 (Negative Bias Stress Effect with Offset Structure in Poly-Si TFT's)

  • 이제혁;변문기;임동규;조봉희;김영호
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1998년도 추계학술대회 논문집
    • /
    • pp.141-144
    • /
    • 1998
  • The electrical characteristics of poly-Si TFT's with offset structure by negative bias stress are systematically investigated as a function of offset length. The changes of electrical characteristics, V$\_$th/, off-current, on/off ratio, in the offset structured poly-Si TFT's are smaller than that of the conventional structured poly-Si TFT's under the stress condition (V$\_$ds/=20V, V$\_$gs/=-20V). It is found that the hot carrier effect by negative bias stress is suppressed by the offset structured poly-Si TFT's because the local electric field near the drain region is decreased by offset region.

  • PDF

Synthesis of New 8-Formyl-4-methyl-7-hydroxy Coumarin Derivatives

  • Manidhar, D.M.;Rao, K. Uma Maheswara;Reddy, N. Bakthavatchala;Sundar, Ch. Syama;Reddy, C. Suresh
    • 대한화학회지
    • /
    • 제56권4호
    • /
    • pp.459-463
    • /
    • 2012
  • 8-Formyl-4-Methyl-7-Hydroxy Coumarin Derivatives were synthesized via Penchem condensation followed by Duffs reaction. Treatment of this with N,N-di substituted cyano acetamides in the presence of piperdine afforded New 8-Formyl-4-Methyl-7-Hydroxy Coumarin Derivatives (7a-o). Their structures were characterized by IR, $^1H$ and $^{13}C$ NMR and Mass spectral and elemental analysis data.

수신함수 역산 및 H-κ 중합법을 이용한 제주도 하부의 S파 지각 속도 (S-Wave Velocities Beneath Jeju Island, Korea, Using Inversion of Receiver Functions and the H-κ Stacking Method)

  • 전태현;김기영;우남철
    • 지구물리와물리탐사
    • /
    • 제16권1호
    • /
    • pp.18-26
    • /
    • 2013
  • 제주도 한라산 주위에 위치한 JJU와 JJB 관측소 하부의 S파 속도구조를 규명하기 위하여, 이 관측소에서 2007년 이후 기록한 $M_W$ 5.5 이상인 원격 지진자료 중 150개 수신함수를 이용하여 역산 및 H-${\kappa}$ 중합법에 적용하였다. 모호면에서 변환된 $P_S$파는 JJU 관측소의 북서쪽(후방위각 $207{\sim}409^{\circ}$, 평균 $308^{\circ}$)과 JJB 관측소의 남동쪽(후방위각 $119{\sim}207^{\circ}$, 평균 $163^{\circ}$) 방향으로 뚜렷하지 않게 나타났다. 이것은 아마도 모호면의 점이적인 속도변화나 지각 내의 속도 불균질층 때문일 수 있다. 수신함수 역산으로부터 계산된 S파 속도모델은 지각 내의 저속도층을 뚜렷이 보여주며, 30 ~ 40 km 깊이에서 점이적으로 증가하는 양상을 보인다. JJB 관측소 반경 18 km 이내에서 저속도층($v_s{\leq}3.5km/s$)은 14 ~ 26 km에 있고, $v_s{\geq}4.3km/s$으로 정의한 '모호면'은 34 km 깊이에 있는 것으로 분석되었다. 서쪽으로 약 10 km 떨어진 곳에 위치한 JJU 관측소의 반경 16 km 이내에서는 저속도층과 '모호면'이 14 ~ 24 km와 30 km에 각각 존재하여 JJB 관측소에 비해 다소 얕은 깊이에서 나타난다. JJU와 JJB 관측소에 대한 H-${\kappa}$ 분석결과는 지각 두께가 29 km와 33 km이며, 종파/횡파 속도비($v_p/v_s$)가 1.64과 1.75임을 각각 나타내어 화산 정상에 가까운 곳에서 상대적으로 낮은 $v_p/v_s$가 관찰되었다.

Velvet직물의 역학적 특성과 태(태) (A Study on the Mechanical Properties and Handle of Velvet Fabrics)

  • 조지현;류덕환
    • 한국의류학회지
    • /
    • 제20권6호
    • /
    • pp.1039-1047
    • /
    • 1996
  • The purpose of this study is to examine and to evaluate the properties of pile materials to produce velvet fabrics which have excellent handle. In order to perform this purpose, the mechanical properties, hand value (H.V.), total hand value (T.H.V.), total appearance value (T.A.V.) of acetate, cuprammonium rayon, cotton materials for velvet as the typical commercial Pile fabric were measured and analyzed by KES-F system. The important results obtained by this study are as follows. 1 For acetate pile, elogational deformation was easy and bending rigidity of weft was high and elastic recovery was excellent compared with the other materials. 2. Cuprammonium rayon velvet was shown that pile bending rigidity and hysterisis were low. Cotton velvet was shown that compressional energy was high and compressinal elasticity was exellent. 3. In the case that specimens were applied by men's winter suit program, H.V was shown that Koshi of acetate velvet was similar to that of cotton. Numeri of cuprammonium rayon velvet was higher than the others and Fukurami values for all of the three fabrics were similar. 4. But in case that specimens were applied by women's winter suit program Koshi of cuprammonium rayon velvet was lower. But Numeri of that was higher than the others and Fukurami for all of the three fabrics were similar and Sofutosa of cotton velvet was lower than the others. T.H.V. of the acetate velvet was the highest in men's winter suit program while cuprammonium rayon velvet was the highest in women's winter suit program T.A.V. of acetate velvet was highest.

  • PDF

체외생산된 한우 배반포기배로부터 송아지 생산을 위한 체계 II. 한우 배반포기배를 간편하면서 효율적이고 성공적으로 유리화 동결하는 방법 (Systems for Production of Calves from Hanwoo(Korean Cattle) IVM/IVF/IVC Blastocyst II. Simple, Efficient and Successful Vitrification of Hanwoo Blastocyst)

  • Kim, E.Y.;Kim, D.I.;Park, N.H.;Weon, Y.S.;Nam, H.K.;Lee, K.S.;Park, S.Y.;Yoon, S.H.;Park, S.P.;Chung, K.S.;Lim, J.H.
    • 한국가축번식학회지
    • /
    • 제23권4호
    • /
    • pp.281-291
    • /
    • 1999
  • 본 실험은 체외 생산된 한우 배반포기배에 적합한 동결 / 융해 방법을 찾고자 실시하였다. 체외배양 7일째에 생산된 배반포기배는 동해제 EFS40(40% ethylene glycol, 18% ficoll, 0.3 M sucrose 그리고 10% FBS가 첨가된 m-DPBS)과 embryo container인 EM grid (V-G) 또는 straw(V-S)를 이용해서 초자화 동결하였다. 동결과 융해는 두 방법 모두 2 단계로 실시하였으며, 처리시간은 V-G 방법이 2 분과 3분, V-S 방법이 3.5분과 10분 각각 소요되었다. 체외 생존능 평가는 융해 후 24시간째의 재팽창율과 48 시간째의 부화율로 조사하였다. 본 실험에서 얻어진 결과는 다음과 같다. 팽창 배반포기배를 이용하여 동결액 노출과 동결과정의 냉해가 배의 생존에 미치는 영향을 조사하였던 바, 융해 후 24시간째, 동결액 노출군 (100.0%)의 결과는 대조군 (100.0%)과 차이가 없었으며, 두 동결군 (V-G: 87.8%, V-S: 77.8%)의 생존율과 비교해 볼 때 유의하게 높았다 (P<0.00l). 그러나, 융해 후 48시간째 각 처리군의 부화율을 조사하였던 바, V-G 군 (67.8%)은 V-S 군 (53.3%)보다 유의하게 높게 나타났으며 (P<0.05), 동결액 노출군 (73.3%)과도 유의한 차이를 나타내지 않았다. 또한, 배발달단계 (초기, 팽창, 부화초기 배반포)와 동결에 사용된 embryo container(EM grid, straw)가 체외 생존율에 미치는 영향을 동시에 비교하였던 바, embryo container 에 상관없이 빠르게 발달된 배반포기배가 느리게 발달하는 난자군보다 유의하게 높은 생존율을 나타내었다 (초기 : 57.1, 24.4%; 팽창 : 84.7, 60.6%; 부화초기 : 91.7, 80.0%)(P<0.001). 특히, 팽창 배반포기배와 부화초기 배반포기배에서, 융해 후 48시간째, V-G군(67.8, 95.0%)의 부화율이 V-S군(53.0, 65.0%)보다 유의하게 높게 나타나 동결시 EM grid 의 유용성을 확인할 수 있었다 (P<0.05, P<0.001). 따라서, 한우 배반포기배는 EM grid를 사용하는 초자화 동결방법으로 간편하면서도 효율적이고 성공적으로 동결보존 할 수 있다는 것을 알았다.

  • PDF

Banach 공간에서 독립인 확률요소들의 Tail 합에 대한 대수의 법칙에 대하여 (On the Tail Series Laws of Large Numbers for Independent Random Elements in Banach Spaces)

  • 남은우
    • 한국콘텐츠학회논문지
    • /
    • 제6권5호
    • /
    • pp.29-34
    • /
    • 2006
  • 본 연구에서는, Banach 공간의 값을 갖는 확률요소들의 합 $S_n=\sum_{i=1}^nV-i$ 수렴하는 경우에, Tail 합 $T_n=S-S_{n-1}=\sum_{i=n}^{\infty}V-i$에 대한 대수의 법칙을 고찰하여 $S_n$이 하나의 확률변수 S로 수렴하는 속도를 연구한다. 좀 더 구체적으로 말하자면, 확률변수들의 Tail 합과 확률요소들의 Tail 합에 대한 극한 성질의 유사성을 연구하여, Banach 공간에서 독립인 확률요소들의 Tail 합에 대한 약 대수의 법칙과 하나의 수렴법칙이 동등함을 기술하는 기존의 정리를 다른 대체적인 방법으로 증명한다.

  • PDF

좌상공정맥을 합병한 복합심혈관기형의 병리해부와 수술 성적: 16례 보 (Patho-anatomy and treatment of complex congenital cardiovascular anomalies associated with left superior vena cava: report of 16 cases)

  • 정원상
    • Journal of Chest Surgery
    • /
    • 제17권2호
    • /
    • pp.177-183
    • /
    • 1984
  • From July 1975 to March 1984, 16 patients of complex congenital cardiovascular anomalies associated with left superior vena cava were seen at Han-Yang University Hospital. The age of patients was ranged from 2 to 15 years-old. The distribution of Sex was 7 patients in male, 9 patients in female. Persistent Left Superior Vena Cava [L.S.V.C.] was classified according to the proximal connection of L.S.V.C. into 3 groups. Group I which L.S.V.C. connected to coronary venous sinus was in 9 patients, Group II which L.S.V.C. connected to Left atrium was in 5 patients, Group III which L.S.V.C. hemodynamically connected to right atrium was in 2 patients. Pathoanatomical findings of complex congenital cardiovascular anomalies associated with L.S.V.C. in 16 cases were generally show unsystematic irregularity. In group I, A.S.D. were only in 3 cases, but in highest incidence and in group III, all two cases were supracardiac type of total anomalous drainage of pulmonary veins. Post-operatively, 3 patients among 14 patients of total correction, were died immediately, 1 patient of palliative shunt operation was died after 2 and half years, and Follow-up results of other remaining patients were excellent.

  • PDF

Novel bricks based lightweight Vietnam's white clay minerals for gamma ray shielding purposes: An extensive experimental study

  • Ta Van Thuong;O.L. Tashlykov;K.A. Mahmoud
    • Nuclear Engineering and Technology
    • /
    • 제56권2호
    • /
    • pp.666-672
    • /
    • 2024
  • In the present work, a new brick series based on the Vietnamese white clay minerals from the Bat Trang was fabricated to be applied in the radiation protection applications during the decommissioning of the nuclear power reactors. The bricks were constructed under various pressure rates varied from 7.61 MPa to 114.22 MPa. The influence of pressure rate on the physical and γ-ray shielding properties were investigated in the study. The experimental measurement for the material's density using the MH-300A density meter showed an enhancement in the prepared bricks' density by 22.5 % with increasing the applied pressure rate while the bricks' porosity reduced by 31.2 % when the pressure rate increased from 7.61 MPa to 114.22 MPa. The increase in the fabricated bricks density and the reduction in their porosities enhances the bricks' linear attenuation coefficients as measured by the NaI (Tl) detector along the energy range extended from 0.662 MeV to 1.332 MeV. The linear attenuation coefficient increased by 13.8 %, 17.6 %, 17.0 %, and 17.1 % at gamma ray energies of 0.662 MeV, 1.173 MeV, 1.252 MeV, and 1.332 MeV, respectively. The enhancement in the linear attenuation coefficient increases the bricks' radiation protection efficiency by 10.22 %, 14.48 %, 14.09 %, and 14.26 % at gamma ray energies of 0.662 MeV, 1.173 MeV, 1.252 MeV, and 1.332 MeV, respectively.

자유형 단조 공정에 의한 Ti-6Al-4V 빌렛 제조기술 (Manufacturing Process of the Ti-6Al-4V Billet by the Open-die Forging)

  • 김국주;최승식;황창률;김종식;염종택;이종수
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2006년도 춘계학술대회 논문집
    • /
    • pp.377-380
    • /
    • 2006
  • Manufacturing process of Ti-6Al-4V alloy billet was investigated with FEM simulation and experimental analysis. Before the breakdown process of Ti-6Al-4V alloy ingot, FEM simulation for the breakdown processes of Ti-6Al-4V alloy ingot was used to calculate the forging load and state variables such as strain, strain rate and temperature. In order to breakdown the ingot structure and make an equiaxed structure billet, two different processes were employed for a VAR/VAR processed Ti-6Al-4V alloy ingot. Firstly, the ingot was cogged in single-phase $\beta$ field at the temperature of $1,100^{\circ}C$. In the process, the coarse and inhomogeneous structure developed by the double melting process was broken down. The second breakdown was performed by upsetting and cogging processes in $\alpha+\beta$ phase field to obtain the microstructure of fine equixed $\alpha$ structure in the matrix of transformed $\beta$. Finally, the mechanical properties of Ti-6Al-4V alloy billet made in this work were compared with those of other billet and ring product.

  • PDF

CdS단결정의 열랄격전류에 관한 연구 (A Study on the Thermally Stimulated Current in CdS Single Crystal)

  • 유용택
    • 한국통신학회논문지
    • /
    • 제7권2호
    • /
    • pp.59-65
    • /
    • 1982
  • 本實驗에 파이퍼-폴리시(piper-polish)法으로 만든 單結晶에 Sb와 In을 이온衝激시킨 스포트에 대하여 熱剌激電流를 測定하였다. Sb와 In을 각각 衝激시켜 熱剌激電流를 測定한 결과 중첩된 피이크가 觀察되었는데 이를 서멀 클리닝(thermal cleaning)法으로 分離하여 147K에서 0.25eV와 0.31eV의 活性에너지를 얻었다. 스포트를 冷却시키면서 光勵起시키면 0.25eV의 트랩(trap)이 사라지고 0.85eV의 트랩이 새로 나타났다. 光電導가 양호한 結晶에서 T.S.C.가 잘 測定되었다.

  • PDF