• Wind and Structures
• /
• 제20권4호
• /
• pp.565-578
• /
• 2015

A wind energy assessment is an integrated analysis of the potential of wind energy resources of a particular area. In this work, the wind energy potentials for Mauritius have been assessed using a Computational Fluid Dynamics (CFD) model. The approach employed in this work aims to enhance the assessment of wind energy potentials for the siting of large-scale wind farms in the island. Validation of the model is done by comparing simulated wind speed data to experimental ones measured at specific locations over the island. The local wind velocity resulting from the CFD simulations are used to compute the weighted-sum power density including annual directional inflow variations determined by wind roses. The model is used to generate contour maps of velocity and power, for Mauritius at a resolution of 500 m.

• 대한임베디드공학회논문지
• /
• 제3권3호
• /
• pp.143-150
• /
• 2008

In this paper, we investigate a real-time environment recognition system based on stereo vision for moving object. This system consists of stereo matching, obstacle detection and distance estimation. In stereo matching part, depth maps can be obtained real road images captured adjustable baseline stereo vision system using belief propagation(BP) algorithm. In detection part, various obstacles are detected using only depth map in case of both v-disparity and column detection method under the real road environment. Finally in estimation part, asymmetric parabola fitting with NCC method improves estimation of obstacle detection. This stereo vision system can be applied to many applications such as unmanned vehicle and robot.

• Transactions on Electrical and Electronic Materials
• /
• 제18권6호
• /
• pp.320-322
• /
• 2017

In this paper, a high-performance, low-area gradient-magnitude calculator architecture is proposed, based on approximate image processing. To reduce the computational complexity of the gradient-magnitude calculation, vector properties, the symmetry axis, and common terms were applied in a hardware-resource-shared architec-ture. The proposed gradient-magnitude calculator was implemented using an Altera Cyclone IV FPGA (EP4CE115F29) and the Quartus II v.16 device software. It satisfied the output-data quality while reducing the logic elements by 23% and the embedded multipliers by 76%, compared with previous work.

• 로봇학회논문지
• /
• 제5권3호
• /
• pp.251-261
• /
• 2010

In this paper, we introduce an internal pipeline exploration of an in-pipe robot, based on the landmark recognition system. The fittings of pipelines such as elbows and branches are used as the landmarks. The robot recognizes the landmarks with a vision system by using the shadows of the elements, which are generated by the specially designed illuminator on the robot. By using a simple image-processing, the robot can easily detect and distinguish these landmarks while recognizing the direction of the pipeline path. Simultaneously, all information for exploration is continuously recorded and used to reconstruct the map of the pipelines. The effectiveness of the proposed method is verified by real experiments using the in-pipe robot MRINSPECT V for moving inside of the miniature urban 8-inch gas pipeline structure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1731-1733
• /
• 1998

This report is the first intermediate report of a series of field test result of large high voltage motors. Major specimens were 3.3/6.6kV class pump motor that was installed and operated for public water service by KOWACO(KOrea WAter resources COperation). The capacity of specimen motors were in range of several hundred kVA. Until now, we get the 22 field test result by testing technique discribed in IEEE standards and discharge-map technique reported by Japanese engineers. The test result were varied very wide range, and there was a tendency according to insulation material and manufacture.

• Steel and Composite Structures
• /
• 제19권5호
• /
• pp.1237-1258
• /
• 2015

This paper proposes a simple inelastic analysis approach to efficiently map out the complete nonlinear post-collapse (strain-softening) response and the maximum load capacity of axially loaded concrete encased steel composite columns (stub and slender). The scheme simultaneously incorporates the influences of difficult instabilizing phenomena such as concrete confinement, initial geometric imperfection, geometric nonlinearity, buckling of reinforcement bars and local buckling of structural steel, on the overall behavior of the composite columns. The proposed numerical method adopts fiber element discretization and an iterative M${\ddot{u}}$ller's algorithm with an additional adaptive technique that robustly yields solution convergence. The accuracy of the proposed analysis scheme is validated through comparisons with various available experimental benchmarks. Finally, a parametric study of various key parameters on the overall behaviors of the composite columns is conducted.

• 호남수학학술지
• /
• 제35권2호
• /
• pp.303-310
• /
• 2013

In this paper, we first show that $z_{{\kappa}X}:E_{cc}({\kappa}X){\rightarrow}{\kappa}X$ is $z^{\sharp}$-irreducible and that if $\mathcal{G}(E_{cc}({\beta}X))$ is a base for closed sets in ${\beta}X$, then $E_{cc}({\kappa}X)$ is $C^*$-embedded in $E_{cc}({\beta}X)$, where ${\kappa}X$ is the extension of X such that $vX{\subseteq}{\kappa}X{\subseteq}{\beta}X$ and ${\kappa}X$ is weakly Lindel$\ddot{o}$f. Using these, we will show that if $\mathcal{G}({\beta}X)$ is a base for closed sets in ${\beta}X$ and for any weakly Lindel$\ddot{o}$f space Y with $X{\subseteq}Y{\subseteq}{\kappa}X$, ${\kappa}X=Y$, then $kE_{cc}(X)=E_{cc}({\kappa}X)$ if and only if ${\beta}E_{cc}(X)=E_{cc}({\beta}X)$.

• 한국수소및신에너지학회논문집
• /
• 제14권3호
• /
• pp.236-246
• /
• 2003

This paper focuses on developing a model of a PEM fuel cell stack and to integrate it with realistic model of the air supply system for fuel cell vehicle application. The fuel cell system model is realistically and accurately simulated air supply operation and its effect on the system power and efficiency using simulation tool Matlab/Simulink. The Peak performance found at a pressure ratio of 3, and it give a 15mV increase per cell. The limit imposed is a minimum SR(Stoichiometric Ratio) of 2 at low fuel cell load and 2.5 at high fuel cell load.

• KSBB Journal
• /
• 제8권4호
• /
• pp.405-408
• /
• 1993

Absidia zychae NRIC 1199 produced two forms of carboxypeptidase(CPZ-1 and CPZ-2) which were distinguished in their isoelectric points but had almost identical properties(1). The amino acid sequences for the N-terminal of both enzymes were the same (Tyr-Thr-Ser-Pro-Lys-Leu-Xaa-Asp-Pro-Asp-Val) and any significant difference was not observed between amino acid compositions of the two enzymes. The ouchterlony double diffusion technique using antibody raised against the CPZ-2 protein demonstrated a good cross-reaction between CPZ-1 and CPZ-2 Genomic Southern analysis showed only one gene encoding CPZ in the genome of Absidia zychae. However, a significant difference between two enzymes was observed on peptide map using Staphylococcus aureus V8 protease, distinguishable only one band, indicating that multiple forms of CPZ are caused by post-translational modification, such as deamidation.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2015년도 제52차 하계학술대회논문집 23권2호
• /
• pp.264-267
• /
• 2015

본 논문에서는 개선된 고속의 Back Projection 기법과 에지맵 보간을 이용한 단일영상 기반의 초해상도(super resolution) 영상을 생성하는 알고리즘을 제안한다. 본 논문에서 제안하는 알고리즘은 영상의 색채 왜곡을 방지하기 위해 RGB 컬러 도메인에서 HSV 컬러 도메인으로 변경하여 밝기정보인 V만 이용한다. 먼저 잡음제거와 속도 향상을 위해 개선된 고속 back projection을 이용해 영상을 확대 재구성한다. 이와 함께 LoG(laplacian of gaussian) 필터링을 이용하여 에지 맵을 추출한다. 에지의 정보와 back projection의 결과를 이용하여 고해상도 영상을 재구성한다. 제안하는 알고리즘을 이용하여 복원한 영상은 부자연스러운 인공물을 효과적으로 제거하고, blur현상을 줄여 에지 정보를 보정하고 강조해준다. 또한 실험을 통해 제안하는 알고리즘이 기존의 보간법과 전통적인 back projection 결과보다 주관적인 화질이 우수하고 객관적으로 우수한 성능을 나타내는 것을 입증한다.