• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1526-1531
• /
• 2009

RFID Reader IC에 응용하기 위한 저전압 특성의 5차 일립틱 CMOS Gm-C 필터를 설계하였다. 설계된 필터는 CMOS 자기바이어스 차동 트랜스컨덕터를 설계하여 구성하였으며 차동 트랜스컨덕터는 기존의 자기 바이어스 차동증폭기의 이득특성을 개선하기 위하여 병렬형으로 구성되었다. 설계된 필터는 RFID 리더용 저전압 필터 설계사양에 따라 1.8V의 저전압으로 동작이 가능하도록 설계되었다. 1.8V, 0.18${\mu}m$CMOS 공정 파라미터를 사용하여 HSPICE 시뮬레이션 결과, 설계된 5차 일립틱 저역 필터가 설계사양인 1.35MHz의 차단주파수를 만족함을 확인하였다.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.120-125
• /
• 2012

Because ships and offshore structures have very large dimensions and complicated shapes, it is difficult to determine the deformation or internal stress in the structure by simple lab tests. Thus, a rigorous analysis by using the computer simulation technology is essential for obtaining their distortions by considering the entire production process characteristics. The rapid development of computer technology made it possible to analyze the heat transfer phenomena, deformation and phase transformation in the welded joint. For large shell structures, shell elements modeling contributed primarily to this development. But if a welding is done by multi-pass, shell elements whose thickness are unchangeable can hard to describe the local situation. Recently, it was researched how to introduce the imaginary temperature for V grooved multi-layer butt welding in strain-boundary method (a kind of shrinkage methodologies). In the present study, we formulated the imaginary temperature for the double bevel and double V groove by considering the thickness change of each pass through the bead and the thickness directions simultaneously and also demonstrated the feasibility of the formula by applying it to the thermal distortion analysis of the erection process of crane pedestal.

• 한국정보통신학회논문지
• /
• 제16권3호
• /
• pp.565-570
• /
• 2012

본 논문은 LTE-Advanced 시스템을 위한 멀티채널을 선택할 수 있는 저역통과 필터를 제안한다. 제안하는 저역통과 필터는 5 MHz, 10 MHz, 그리고 40 MHz의 3가지 모드의 차단주파수를 제공하며 Active-RC 5차 Chebyshev 구조로 설계되었다. 저전력을 확보하면서 40 MHz의 높은 차단 주파수를 확보하기 위해서 부성 저항을 가지는 PMOS Cross-Connection Load를 사용한 연산증폭기를 필터에 적용하였다. 더불어 공정, 전압, 그리고 온도에 의한 각각의 차단주파수 변화에 대응할 수 있도록 각각 3-bit 제어 가능한 튜닝회로를 추가하였다. 제안하는 필터는 0.13-${\mu}m$ CMOS 공정을 사용하여 설계하였으며 1.2 V 전압에서 총 20.9 mW 전력을 소모한다.

• Journal of Welding and Joining
• /
• 제28권5호
• /
• pp.86-92
• /
• 2010

In GMAW processes, bead geometry is a criterion to estimate welding quality. Bead geometry is affected by welding current, arc voltage, welding speed, shielding gas and so on. Thus the welding condition has to be selected carefully. In this paper, an experimental method for the selection of optimal welding condition was proposed in the root pass welding which was done along the GMA V-grooved butt weld joint. This method uses the response surface analysis in which the width and height of back bead were chosen as the quality variables of the weld. The overall desirability function, which is the combined desirability function for the two quality variables, was used as the objective function for getting the optimal welding condition. Through the experiments, the target values of the back bead width and the height were chosen as 4mm and 1mm respectively for the V-grooved butt weld joint. From a series of welding test, it was revealed that a uniform weld bead can be obtained by adopting the optimal welding condition which was determined according to the method proposed.

• 전기전자학회논문지
• /
• 제26권2호
• /
• pp.313-318
• /
• 2022

피드백 전압 감지 구조는 기존 외부 출력 캐패시터의 제거로 인한 오버슈트 및 언더슈트 현상을 완화하기 위해 제안된다. 기존의 LDO 레귤레이터는 전원 공급 전압의 불균형으로 인해 발생하는 오버슈트 및 언더슈트를 겪는다. 따라서 제안된 LDO는 기존 LDO의 피드백 경로만 유지하면서 새로운 제어 경로를 형성하기 위해 보다 개선된 과도 응답을 갖도록 설계되었다. 새로운 제어 경로는 출력 단계에서 발생하는 오버슈트 및 언더슈트 현상을 감지한다. 이에, 패스 소자의 게이트 노드의 전류를 충방전함으로써 패스 소자의 동작 속도가 향상된다. 피드백 전압 감지 구조가 있는 LDO 레귤레이터는 3.3~4.5V의 입력 전압 범위에서 작동하며 3V의 출력 전압에서 최대 200mA의 부하 전류를 가집니다. 시뮬레이션 결과에 따르면 부하전류가 200mA일 때 언더슈트 조건에서는 73mV, 오버슈트 조건에서는 61mV이다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.91-94
• /
• 2000

This paper introduces the design of low-power, fast-locking delay locked-loop using complementary pass transistor logic(CPL). Low-power design has become one of the most important in the modem VLSI application. CPL has the advantage of fast speed, high density, and low power with signal buffering between stages. Based on this analysis, we concluded that the I/O performance can be beyond 500㎒, 2-poly, 2-metal 0.65$\mu\textrm{m}$, 3.3V supply.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권4호
• /
• pp.282-291
• /
• 2010

This paper presents a full-CMOS transmitter and receiver for VDSL2 systems. The transmitter part consists of the low-pass filter, programmable gain amplifier (PGA) and 14-bit DAC. The receiver part consists of the low-pass filter, variable gain amplifier (VGA), and 13-bit ADC. The low pass filter and PGA are designed to support the variable data rate. The RC bank sharing architecture for the low pass filter has reduced the chip size significantly. And, the 80 Msps, high resolution DAC and ADC are integrated to guarantee the SNR. Also, the transmitter and receiver are designed to have a wide dynamic range and gain control range because the signal from the VDSL2 line is variable depending on the distance. The chip is implemented in 0.25 ${\mu}m$ CMOS technology and the die area is 5 mm $\times$ 5 mm. The spurious free dynamic range (SFDR) and SNR of the transmitter and receiver are 67.5 dB and 41 dB, respectively. The power consumption of the transmitter and receiver are 160 mW and 250 mW from the supply voltage of 2.5 V, respectively.

• Journal of Welding and Joining
• /
• 제13권4호
• /
• pp.122-131
• /
• 1995

An automatic welding equipment for thick plates requires the capability of the seam tracking of the weld line which often includes misalignment of the workpiece and variation of groove width. In this study, an automatic welding equipment and control algorithms based on the arc sensor were proposed for the GMA welding of thick plates which had misalignment and gap variation. The developed system being constituted with 5 axis can be automatically controlled by computer and also automnatically set the welding conditions such as welding current, and voltage. The proposed algorithms for the seam tracking in multi-pass welding of the thick plates were constituted as follows : the detection of weaving-end point for findng the variation of groove width, the control of welding velocity for acquiring a constant thickness deposition of weld metal, and the calculation of groove width and height of an arbitrary pass in the multi-pass weld. As results of the application of the system, it was revealed that the system had a good capability in seam tracking and made an excellent weld quality in V groove butt joint.

• 대한수학회지
• /
• 제57권6호
• /
• pp.1551-1571
• /
• 2020

This paper is concerned with the following Kirchhoff-Schrödinger-Poisson system $$\begin{cases} -(a+b{\displaystyle\smashmargin{2}\int\nolimits_{\mathbb{R}^3}}{\mid}{\nabla}u{\mid}^2dx){\Delta}u+V(x)u+{\mu}{\phi}u={\lambda}f(x){\mid}u{\mid}^{p-2}u+g(x){\mid}u{\mid}^{p-2}u,&{\text{ in }}{\mathbb{R}}^3,\\-{\Delta}{\phi}={\mu}{\mid}u{\mid}^2,&{\text{ in }}{\mathbb{R}}^3, \end{cases}$$ where a > 0, b, µ ≥ 0, p ∈ (1, 2), q ∈ [4, 6) and λ > 0 is a parameter. Under some suitable assumptions on V (x), f(x) and g(x), we prove that the above system has at least two different nontrivial solutions via the Ekeland's variational principle and the Mountain Pass Theorem in critical point theory. Some recent results from the literature are improved and extended.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2019년도 추계학술대회
• /
• pp.22-23
• /
• 2019

관제장비 기술의 발전으로 표출정보의 증가으로 관제사의 관리선박들은 급증하였지만, 수집된 고품질의 정보들을 어떻게 활용하여 관제사에게 관제 편의성을 제공할 시스템은 발전되지 않았다. 유사기관 운영시스템 사례를 벤치마킹하여, 기존 정보수집 중심 VTS시스템에서 기상특보 자동발송 시스템, VTS시스템과 V-Pass시스템 결합, 조난신호 표출시스템 등 관제사 중심(편의) 시스템을 예를 들어 제안함으로써 새로운 VTS시스템으로의 패러다임 변화를 하고자 한다.