• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.626-632
• /
• 2008

The purpose of this study was to enhance gas exchange by producing hemosome, a hemoglobin microencapsulated with phospholipid of egg, and perfluorocarbone(PFC) emulsion solution. In the experiment, stable emulsion solution with 437 nm of mean particle size could be produced by Flusol-DA sonication, and shortening of emulsion time could be attained with higher stability as well. $0.8{\mu}m$ sized hemosome could be produced by microencapsulation of hemoglobin with phospholipid extracted from egg yolk. The pattern of oxygen saturation curve of hemosome was S shape, which is similar to that found in normal blood, and $P_{50}$ was measured to be 24 mmHg. The oxygen saturation in the mixed solution of hemosome and blood in 1:4(V/V%) ratio was similar to that of normal blood, and the same result was found in the mixed solution of PFC emulsion and blood in 1:4(V/V%) ratio.

• Journal of the Korean Wood Science and Technology
• /
• v.8 no.1
• /
• pp.22-27
• /
• 1980

Quantitative assessment of edge blunting of saw-teeth was carried out by TALYSURF. 1. Using the following equation, the real shape of a saw-tooth can be traced on the graph of TALYSURF. ${\frac{{\Delta}h}{h}}={\frac{V{\Delta}_x}{V_x}}$ {${\Delta}h$: vertical distance of stylus h: vertical distance in chart $V{\Delta}_x$: Velocity of stylus $V_x$: velocity of chart} 2. As shown on Fig 2, the error from stylus itself can be calculated by following equation. i) 13.8${\mu}{\leqq}$x<20.4${\mu}$ y=-0.2246x+4.59${\mu}$ ii) 0${\leqq}$x<13.8${\mu}$ y=${\sqrt{(-18{\mu})^2-x^2}}-1.42x+32.7{\mu}}$ 3. The relationship between profile of saw-tooth and error from stylus itself can be calculated by following equation. $E(%)=\frac{f(r){\times}{\frac{4}{18{\mu}}}}{f(R){\times}{\frac{R}{18.5{\mu}}}-f(r){\times}{\frac{r}{18{\mu}}}}{\times}100$ {E(%)${\frac{error\;of\;stylus}{dullness\;of\;saw\;tooth}}{\times}100$ r: radius of stylus tip R: radius of tip which is drawn in graph of talysurf f(r) : error of stylus f(R) : dullness of tip which is drawn in graph of talysurf} 4. The graph of maximum error and profile of saw-tooth was parabola.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.5
• /
• pp.321-327
• /
• 2017

PURPOSE. The aim of this study was to investigate dental arch dimensions and to classify arch shape in Korean young adults. MATERIALS AND METHODS. The sample included 50 Koreans with age ranging from 24 to 32 years. Maxillary and mandibular casts were fabricated using irreversible hydrocolloid and type III dental stones. Incisor-canine distance, $incisor-1^{st}$ molar distance, $incisor-2^{nd}$ molar distance, intercanine distance, $inter-1^{st}$ molar distance, and $inter-2^{nd}$ molar distance in both the maxillary and mandibular arch were measured using a three-dimensional measuring device. The dental arch was classified into three groups using five ratios from the measured values by the K-means clustering method. The data were analyzed with one-way analysis of variance. RESULTS. Arch lengths (IM2D, $incisal-2^{nd}$ molar distance) were 44.13 mm in the maxilla and 40.40 mm in the mandible. Arch widths (M2W, inter $2^{nd}$ molar width) were 64.12 mm in the maxilla and 56.37 mm in the mandible. Distribution of the dental arch form was mostly ovoid shape (maxilla 52% and mandible 56%), followed by the V-shape and the U-shape. The arch width for the U-shape was broader than for the other forms. CONCLUSION. This study establishes new reference data for dental arch dimensions for young Korean adults. The most common arch form is the ovoid type in the maxilla and mandible of Koreans. Clinicians should be aware of these references and classify arch type before and during their dental treatment for effective and harmonized results in Koreans.

• International Journal of High-Rise Buildings
• /
• v.2 no.1
• /
• pp.11-21
• /
• 2013

The use of concrete filling offers a practical alternative for achieving the required stability of steel Hollow Structural Section (HSS) columns under fire conditions. However, current methods for evaluating fire resistance of Concrete Filled Hollow Structural Steel (CFHSS) columns are highly conservative as they are based on an elemental approach without due consideration to structural interactions that occur in framed structural systems. To overcome this limitation, a system level fire resistance analysis was carried out by treating CFHSS columns as part of an overall structural frame. In this analysis, an eight story steel-framed building was modeled under a range of standard and performance-based fire scenarios (including multi-story progressive burn-out fires) to evaluate the contribution of various structural members/assemblies to overall fire resistance. One of the primary factors considered was the use of concrete filling in HSS columns as an alternative to standard W-shape columns. Results from the analysis indicate that the use of CFHSS columns, in place of W-shape columns, in a performance-based environment can fully eliminate the need for applied fire protection to columns, while providing the required level of structural fire resistance.

• Journal of Sensor Science and Technology
• /
• v.23 no.6
• /
• pp.388-391
• /
• 2014

The most promising application of the biofuel cells is implantable devices, so the biofuel cells should have an appropriate shape for the vascular vessel. We demonstrated the biofuel cell roll for using in tubes. MWNTs were aggregated by vacuum filtration on a nitrocellulose membrane filter, which was biocompatible and flexible. The MWNT aggregated nitrocellulose membrane used the electrodes of the biofuel cells because it was conductive as well as nanostuructured. Then, the membrane was rolled into the roll shape. The maximum power density of the biofuel cell roll was $7.9{\mu}W/cm^2$ at 153mV and 50 mM glucose. Also, the power density is expected to increase in its practical application if there is flow in the tube, which makes the transportation of fuel easy. The biofuel cell roll contacts with the wall of the tube, so flow in the tube does not disturb. Also, the biofuel cell roll has multi-layers offering more electroactive area.

• Journal of the Korean Society of Costume
• /
• v.52 no.6
• /
• pp.1-13
• /
• 2002

This paper investigated the costumes of young girl dancers in Yon wha dae moo(연화대무: Lotus Stage dance) which were documented on the Ak-hak-guae-bum(악학궤범: Protocol of music) and the Jin-yeon-eui-guae(진연의궤: Archives of Royal Feast). The fashion of the costumes can be changed into three phases, based mainly on the changes of Hap-rip(합립: silk hat), Dan-eui(단의: long jacket) and Sang(상: apron type skirt). In the first phase the costume consisted of Hap-rip, round neck-line Dan-eui and tiered skirt decorated with pleat and Yu-so(유소: decorated cords). In the second phase. it consisted of Hap-rip, v-shape neck-line Dan-eui and skirt without pleat. In the third phase, it consisted of Yeon-wha-gwan(연화관: Lotus shape cap), round neck-line Dan-eui of later era and skirt with pleat and Yu-so. Yon-wha-dae dance appears to be adopted from Ja-ji-mu( 자지무: chinese dance) that originated in West and Central Asia. In both dances. young girl dancers danced mainly jump and spin. The costume of round neck-line Dan-eui seems to have been affected by the fashion in Dang Dynasty when young girls loved to wear Dan-ryung(단령: male coat with round neckline). And it satisfied the need of mobility for the dance which was Performed mainly with jump.

• Journal of Environmental Science International
• /
• v.24 no.2
• /
• pp.261-266
• /
• 2015

We have analyzed the external morphology and the environment of the foraging site of Vespertilio sinensis. The external morphology was analyzed by twelve parameters and the environment characteristics of the foraging site was analyzed using GIS 10.1 program. The wing membrane was inserted into the ankle of the hind foot and the wing ratio was 1.42, the middle type between broad-short wing type and long-narrow wing type. The fur color was blackish brown but the guard hair color was whitish. The shape of the ear was a rounded triangle and tragus was a fan shape. This study showed that V. sinensis preferred the deciduous forest of the upper forest zone, where human interference was less. We believed that abundance of insects, depending on water system, was closely related to the use of the foraging site. This result showed that the environment characteristics was very similar to the nature preservation zone including Baekyang valley and Keumsun valley in Naejangsan National Park.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.2
• /
• pp.38-47
• /
• 2001

This paper decribes the development of computer-aided design of a very precise progressice die for lead frame of semiconductor chip. The approach to the system is based on knowledgr-based rules. Knowledge of fie이 experts. This system has been written in AutoLISP using AutoCAD ona personal computer and the I-DEAS drafting programming Language on the I-DEAS mater series drafting with on HP9000/715(64) workstation. Data exchange between AutoCAD and I-DEAS master series drafting is accomplished using DXF(drawing exchange format) and IGES(initial graphics exchange specification) files. This system is composed of six main modules, which are input and shape treatment, production feasibility check, strip layout, data conversion, die layout, and post processing modules. Based on Knowledge-based rules, the system considers several factors, such as V-notches, dimple, pad chamfer, spank, cavity punch, camber, coined area, cross bow, material and thickness of product, complexities of blank geometry and punch profiles, specifications of available presses, and the availability of standard parts. As forming processes and the die design system using 2D geometry recognition are integrated with the technology of process planning, die design, and CAE analysis, the standardization of die part for lead frames requiting a high precision process is possible. The die layout drawing generated by the die layout module s displayed in graphic form. The developed system makes it possible to design and manufacture lead frame of a semiconductor more efficiently.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.709-713
• /
• 2004

Characteristics of laser-assisted wet etching of titanium in phosphoric acid were investigated to examine the feasibility of this method for fabrication of high aspect ratio microchannels. Laser power, number of scans, etchant concentration, position of beam waist and scanning speed were taken into consideration as the major process parameters exerting the temperature distribution and the cross sectional profile of etched channels. Experimental results indicated that laser power influences on both etch width and depth while number of scans and scanning speed mainly affect on the etch depth. At a low etchant concentration, the cross sectional profile of an etched channel becomes a U-shape but it gradually turns into a V-shape as the concentration increases. On the other hand, surface of the laser beam focus with respect to the sample surface is found to be a key factor determining the bubble dynamics and thus the process stability. It is demonstrated that metallic microchannels with different cross sectional profiles can be fabricated by properly controlling the process parameters. Microchannels of aspect ratio up to 8 with the width and depth ranges of 8∼32 m and 50∼300 m, respectively, were fabricated.

• Journal of Powder Materials
• /
• v.9 no.3
• /
• pp.174-181
• /
• 2002

Nanosized tungsten carbide powders were synthesized by the chemical vapor condensation(CVC) process using the pyrolysis of tungsten hexacarbonyl($W(CO)_6$). The effect of CVC parameters on the formation and the microstructural change of as-prepared powders were studied by XRD, BET and TEM. The loosely agglomerated nanosized tungsten-carbide($WC_{1-x}$) particles having the smooth rounded tetragonal shape could be obtained below $1000^{\circ}C$ in argon and air atmosphere respectively. The grain size of powders was decreased from 53 nm to 28 nm with increasing reaction temperature. The increase of particle size with reaction temperature represented that the condensation of precursor vapor dominated the powder formation in CVC reactor. The powder prepared at $1000^{\circ}C$ was consisted of the pure W and cubic tungsten-carbide ($WC_{1-x}$), and their surfaces had irregular shape because the pure W was formed on the $WC_{1-x}$ powders. The $WC_{1-x}$ and W powders having the average particles size of about 5 nm were produced in vacuum.