• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1493-1494
• /
• 1998

We have investigated the influence of Ti/Ba mole ratio in the characteristics of the modified $BaTiO_3$ systems with Ca addition. The specimens were fabricated with variations in Ti/Ba mole ratio between 0.995 and 1.01, and sintered in the temperature range between $1325^{\circ}C$ and $1375^{\circ}C$. When Ti/Ba mole ratio was 1.005 and sintering temperature was $1350^{\circ}C$, the breakdown voltage shows 260[V /mm].

• Journal of Ecology and Environment
• /
• 제42권1호
• /
• pp.1-11
• /
• 2018

Background: In the study, the effects of elevated $CO_2$ and temperature on the nitrogen content, carbon content, and C:N ratio of seven rare and endangered species (Quercus gilva, Hibiscus hambo, Paliurus ramosissimus, Cicuta virosa, Bupleurum latissimum, Viola raddeana, and Iris dichotoma) were examined under control (ambient $CO_2$ + ambient temperature) and treatment (elevated $CO_2$ + elevated temperature) for 3 years (May 2008 and June 2011). Results: Elevated $CO_2$ concentration and temperature result in a decline in leaf nitrogen content for three woody species in May 2009 and June 2011, while four herb species showed different responses to each other. The nitrogen content of B. latissimum and I. dichotoma decreased under treatment in either 2009 and 2011. The leaf nitrogen content of C. virosa and V. raddeana was not significantly affected by elevated $CO_2$ and temperature in 2009, but that of C. virosa increased and that V. raddeana decreased under the treatment in 2011. In 2009, it was found that there was no difference in carbon content in the leaves of the six species except for that of P. ramosissimus. On the other hand, while there was no difference in carbon content in the leaves of Q. gilva in the control and treatment in 2011, carbon content in the leaves of the remaining six species increased due to the rise of $CO_2$ concentration and temperature. The C:N ratio in the leaf of C. virosa grown in the treatment was lower in both 2009 and 2011 than that in the control. The C:N ratio in the leaf of V. raddeana decreased by 16.4% from the previous year, but increased by 28.9% in 2011. For the other five species, C:N ratios increased both in 2009 and 2011. In 2009 and 2011, chlorophyll contents in the leaves of Q. gilva and H. hamabo were higher in the treatment than those in the control. In the case of P. ramosissimus, the ratio was higher in the treatment than that in the control in 2009, but in 2011, the result was the opposite. Among four herb species, the chlorophyll contents in the leaves of C. virosa, V. raddeana, and I. dichotoma did not show any difference between gradients in 2009, but decreased due to the rise of $CO_2$ concentration and temperature in 2011. Leaf nitrogen and carbon contents, C:N ratio, and chlorophyll contents in the leaves of seven rare and endangered species of plant were found to be influenced by the rise and duration of $CO_2$ concentration and temperature, species, and interaction among those factors. Conclusions: The findings above seem to show that long-term rise of $CO_2$ concentration, and temperature causes changes in physiological responses of rare and endangered species of plant and the responses may be species-specific. In particular, woody species seem to be more sensitive to the rise of $CO_2$ concentration and temperature than herb species.

• 전자공학회논문지T
• /
• 제36T권3호
• /
• pp.56-63
• /
• 1999

본 논문에서는 BF 컨버터의 Active PFC 시스템을 구성하고, 전력 변환시 입력 전류를 전원 전압과 동상인 정현파로 제어하며 직류 출력 전압을 제어하기 위한 PWM-PFM 제어 기법을 사용하여 역률을 개선하였다. FET와 IGBT를 이용하여 본 논문에서 제시한 Boost 컨버터와 인버터 회로를 구성하였고, 제안된 Boost 컨버터의 제어 회로는 마이크로프로세서 80C196으로 구성하였다. 또한 입력 전압이 30V이고, Boost 인덕터가 1.1 mH일 때 정격 출력은 전압 50V, 전류 IA, 듀티비 (Duty Ratio) 0.5 이상으로 하였다. 부하 저항의 변화에 따른 전압 변화를 PWM-PFM 제어 기법을 이용하여 제어하였고, 전류 성형 기법을 이용하여 역률이 0.96 가지 개선됨을 실험으로써 입증하였다.

• KSBB Journal
• /
• 제15권6호
• /
• pp.630-634
• /
• 2000

에폭사이드 가수분해효소 활성이 우수한 Aspergillus niger 를 생촉매로 이용하여 업체선택적 가수분해 반응을 통해 라세믹 styrene oxide 기질로부터 광학활성 (S)-styrene oxide를 생산하는 실험을 수행하였다. (R)-styrene oxide 이성질체에 대한 초기 가수분해 속도에 영향을 주는 실험인자들인 pH, 반응온도, cosolvent 첨가량 등에 대해 중심합성계획법을 이용한 반응표면 분석을 통해 가수분해반응 속도를 향상시킬 수 있는 최적 반응조건을 결정하였다. pH 7.78, 반응온도 2 $28.32^{\circ}C$ 및 cosolvent 첨가량 2.4% (v/v)의 조건에서 약 10시간 정도의 반응을 통해 ee 값이 100%인 광학적으로 순수한 (S)-styrene oxide를 35% 정도(이론수율 = 50%)의 높은 수율로 얻을 수 있었다.

• 설비공학논문집
• /
• 제29권8호
• /
• pp.401-407
• /
• 2017

The effect of different rib geometries such as V-shaped continuous (case A), parallel broken (case B), and V-shaped broken (case C) ribs on local heat transfer distributions and pressure drops in a divergent channel with $30^{\circ}$ inclined ribs on one wall or two walls was investigated for Reynolds numbers from 22,000 to 75,000. Top and bottom walls were insulated; two side walls were uniformly heated in the divergent channel. Heated walls were composed of 10 isolated coper sections and length-to-outlet hydraulic diameter ratio of 10. Rib height-to-outlet hydraulic diameter ratio was 0.1, and rib pitch-to-height ratio equaled 10. Results revealed that V-shaped continuous rib (case A) produced approximately 1.4 times higher average Nussselt number than in the parallel broken rib (case B), and V-shaped broken rib (case C) in the channel with two ribbed walls at Re = 54,000.

• 농업과학연구
• /
• 제27권1호
• /
• pp.39-47
• /
• 2000

본 연구는 연약지반의 심도가 갚으면서 압밀침하량이 큰 지역에서 연직드레인 공법에 의하여 개량한 지반의 침하거동을 파악하고, 현장계측결과를 기초로 기존의 최종침하량의 예측방법과 현장계측치로부터 역산한 압축지수와 압밀계수의 범위를 실내시험과 비교분석 한 것으로 본 연구 대상지역에서 얻은 결과를 요약하면 다음과 같다. 1. 최종침하량 예측방법에 의하여 구한 최종예상침하량은 쌍곡선 방법이 가장 크고, Asaoka 방법과 Curve fitting 방법은 유사하게 나타났으며, 타입간격이 좁을 경우에는 교란영향을 고려한 설계가 검토되어야 할 것으로 판단된다. 2. 실측압밀도($U_m$)와 설계압밀도($U_t$)와의 관계는 쌍곡선 방법에서 $U_m$=(0.88~1.03)$U_t$으로 약간 작게 나타났고, Asaoka 방법은 $U_m$=(1.07~1.20)$U_t$, Curve fitting 방법은 $U_m$=(1.13~1.17)$U_t$으로 유사하게 나타났다. 3. 실내압축지수($V_{cclab}$)와 현장압축지수($Cc_{field}$)와의 관계는 쌍곡선 방법에서는 $Cc_{field}$=(1.26~1.45)$V_{cclab}$, Asaoka 방법에서는 $Cc_{field}$=(1.08~1.15)$V_{cclab}$, Curve fitting 방법에서는 $Cc_{field}$=(1.04~1.21)$V_{cclab}$의 범위로 쌍곡선방법에서는 약간 크게 나타났고, Asaoka와 Curve fitting 방법은 거의 동일한 값을 나타냈다. 4. 현장계측치로부터 역산한 현장압밀계수 ($C_h$)와 실내시험에서 구한 수직압밀계수($C_v$)와의 비는 ($C_h$/$C_v$) 쌍곡선방법에서는 0.7~0.9. Asaoka 방법에서는 0.9~1.5. Curve fitting 방법에서는 2.4~3.0의 범위로 나타났다. 5. 현장압밀계수는 방치기간이 경과함에 따라서 점차로 감소하는 경향을 나타내므로 압밀이 완료되었을 때에 최종침하량 예측방법에 의하여 재분석한 후 정확한 압밀계수를 산정하는 것이 합리적이라고 판단된다.

• 전자공학회논문지C
• /
• 제34C권4호
• /
• pp.1-15
• /
• 1997

This paper proposes CMOS on-chip voltage and current reference circuits that operate at supply voltages between 2.5V and 5.5V without using a vonventional bandgap voltage structure. The proposed reference circuits based on enhancement-type MOS transistors show low cost, compatibility with other on-chip MOS circuits, low-power consumption, and small-chip size. The prototype was implemented in a 0.6 um n-well single-poly double-metal CMOS process and occupies an active die area of $710 um \times 190 um$. The proposed voltage reference realizes a mean value of 0.97 V with a standard deviation of $\pm0.39 mV$, and a temperature coefficient of $8.2 ppm/^{\circ}C$ over an extended temeprature range from TEX>$-25^{\circ}C$ to $75^{\circ}C$. A measured PSRR (power supply rejection ratio) is about -67 dB at 50kHz.

• 농업과학연구
• /
• 제24권2호
• /
• pp.145-155
• /
• 1997

본 연구는 현재 시공중인 사업부지를 선정하여 시험시공중에 있는 연약지반에서 페이퍼 드레인 공법에 의하여 처리한 지반에서 드레인의 타입간격별 침하거동을 파악하고, 실내시험과 현장계측치로부터 구한 압축지수와 압밀계수를 비교분석하여 배수성능의 우수성을 평가한 것으로 그결과를 요약하면 다음과 같다. 1. 실측침하량($S_m$)과 설계침하량($S_t$)의 관계 및 실측압밀도($U_m$)와 설계압밀도($U_t$)와의 관계는 드레인 타입간격 1.0m에서는 $S_m=(1.0{\sim}1.1)S_t$, $U_m=(1.13{\sim}1.17)U_t$로 나타났고, 드레인 타입간격 1.5m에서는 $S_m=(0.7{\sim}0.8)S_t$, $U_m=0.92{\sim}0.99)U_t$의 범위로 나타났다. 2. 현장압축지수($Cc_{Field}$)와 처녀압축지수($V_{CC_{lab.}}$)와의 관계는 $Cc_{Field}=(1.0{\sim}1.2)V_{CC_{lab.}}$로 나타났으나, 처녀압축지수의 결정밥법과 최종예상 침하량의 적용방법에 따른 오차를 감안하면 거의 동일한 것으로 판단된다. 3. 계측치로부터 역산한 현장압밀계수는 실내시험에서 구한 압밀계수보다 크게 나타났고, 압밀계수비($C_h/C_v$)는 드레인 타입간격 1.0m에서는 $C_h=(2.4{\sim}3.0)C_v$, 드레인 타입간격 1.5m에서는 $C_h=(3.5{\sim}4.3)C_v$의 범위로 타입간격이 넓을수록 크게 나타났다. 4 드레인 타입간격에 따른 드레인 자재별 배수성능 평가기준을 압밀계수비의 결과를 기초로 판단하여 보면, 드레인 타입간격 1.0m에서는 Mebra 드레인, 드레인 타입간격 1.5m에서는 Amer드레인이 약간 우수한 것으로 나타났으나, 동일한 타입간격에서는 재질간의 큰차이가 발생되지 않아 모두 동일한 배수성능을 갖는 것으로 판단된다.

• 전기의세계
• /
• 제26권6호
• /
• pp.78-85
• /
• 1977

This paper studies flashover voltage and surface corona loss of A.C and D.C in the mixed gas of air and SF$_{6}$ for solid insulators P.V.C, arcylic, glass and bakelite in two cases. In one case, those solids are covered with transformer oil and the other case, those solids are not covered with it. 1) The flashover voltage for each solids in SF$_{6}$ is more than three times compared with that in the air. The flashover voltage for P.V.C is the highest and then arcylic, glass, bakelite in a decreasing order. 2) The more the amount of SF$_{6}$ in the mixing ratio, the less corona loss. The P.V.C shows the least amount of corona loss and the bakelite the largest. 3) Compared with the corona loss of positive polarity and the negative polarity, the former has less corona loss than the latter. 4) The more the number of flashover discharge, the less insulation of each solids, but in case of bakelite, insulation almost vanishes after a couple of discharge. 5) When each insulator is covered with transformer oil, the flashover voltage generally increases and the corona loss decreases.eases.

• 한국재료학회지
• /
• 제14권4호
• /
• pp.235-238
• /
• 2004

The LT-MBE (low temperature molecular beam epitaxy) allows to dope GaAs with Mn over its solubility limit. A 75 urn thick GaMnAs layers are grown on a low temperature grown LT-GaAs buffer layer at a substrate temperature of $260^{\circ}C$ by varying Mn contents ranged from 0.03 to 0.05. The typical growth rate for GaMnAs layer is fixed at 0.97 $\mu\textrm{m}$/h and the V/III ratio is varied from 25 to 34. The electrical and magnetic properties are investigated by Hall effect and superconducting quantum interference device(SQUID) measurements, respectively. Double crystal X-ray diffraction(DCXRD) is also performed to investigate the crystallinity of GaMnAs layers. The $T_{c}$ of the $Ga_{l-x}$ /$Mn_{x}$ As films grown by LT-MBE are enhanced from 38 K to 65 K as x increases from 0.03 into 0.05 whereas the $T_{c}$ becomes lower to 45 K when the V/III ratio increases up to 34 at the same composition of x=0.05. This means that the ferromagnetic exchange coupling between Mn-ion and a hole is affected by the growth condition of the enhanced V/III ratio in which the excess-As and As-antisite defects may be easily incorporated into GaMnAs layer.