• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.1
• /
• pp.81-87
• /
• 1994

This paper describes the recognition of the printed Hanguel(Korean Character) using Neural Network. In this study, Neural network is used in only specific classification. Hanguel is classified globally by using template matching. Neural network is learned using the segmented grapheme. The grapheme of Hanguel is segmented using the structural method. Neural network is constructed, which is corresponded to the kind and the shape of graphemes. Each neural network is multi layer perceptron. The learning algorithm is the modified error back propagation using descending epsilon method. With five test character sets, the recognition rate of 94.95% is obtained.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.4
• /
• pp.131-140
• /
• 1996

In this paper, we propose the method that extracts the speech feature using the hearing model through signal precessing techniques. The proposed method includes following procedure ; normalization of the short-time speech block by its maximum value, multi-resolution analysis using the discrete wavelet transformation and re-synthesize using thediscrete inverse wavelet transformation, differentiation after analysis and synthesis, full wave rectification and integration. In order to verify the performance of the proposed speech feature in the speech recognition task, korean digita recognition experiments were carried out using both the dTW and the VQ-HMM. The results showed that, in case of using dTW, the recognition rates were 99.79% and 90.33% for speaker-dependent and speaker-independent task respectively and, in case of using VQ-HMM, the rate were 96.5% and 81.5% respectively. And it indicates that the proposed speech feature has the potentials to use as a simple and efficient feature for recognition task.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.3
• /
• pp.69-75
• /
• 2009

In this paper, we proposed CPLD low power algorithm using reduce glitch power consumption. Proposed algorithm generated a feasible cluster by circuit partition considering the CLB condition within CPLD. Glitch removal process using delay buffer insertion method for feasible cluster. Also, glitch removal process using same method between feasible clusters. The proposed method is examined by using benchmarks in SIS, it compared power consumption to a CLB-based CPLD low power technology mapping algorithm for trade-off and a low power circuit design using selective glitch removal method. The experiments results show reduction in the power consumption by 15% comparing with that of and 6% comparing with that of.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.452-457
• /
• 2003

As a fundamental study on developing elements with micro shape, micro mold parts machining and experiment of injection molding using it were performed. The ultra precision micro machining system with high functionality was fabricated, and utilized in the machining of micro parts. By using this machining system and micro end-mill tool, a micro circle column structure of high aspect ratio, diameter 60 $\mu\textrm{m}$, height 500 $\mu\textrm{m}$, was fabricated. And a micro lens molds were fabricated by using ball end-mill tool of 300 $\mu\textrm{m}$ diameter and diamond fly-cut tool of 150 $\mu\textrm{m}$ radius. A micro injection molding machine, which is clamping force 1.75 ton, injection capacity 2.8cc, was fabricated for injection molding experiment using micro molds. The injection molding experiment was performed by using the injection molding machine, micro cylinder structures and lens molds. This paper introduces these micro machining system and injection molding machine and demonstrates examples of injection molding using fabricated molds.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.1
• /
• pp.70-75
• /
• 2010

The objective of this paper is to propose a new velocity measurement method for an electro-mechanical fin actuator. The model of the electro-mechanical fin actuator includes uncertainties such as unknown disturbances and parameter variations in flight condition. So, an electro-mechanical fin actuator system needs robust control algorithm which requires not only position information but also velocity information. Usually, analog tachometers have been used for velocity feedback in an electro-mechanical fin actuator. However, using these types of sensors have problems such as the cost, space, and malfunction. These problems lead to propose a new velocity measurement method using linear type Hall-effect sensor. In order to verify the proposed method, several experiments are performed using Model Following Sliding Mode Controller(MFSMC). It is shown that the MFSMC with a new velocity measurement method using linear type Hall-effect sensor can satisfy the requirements without using of velocity sensor.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10c
• /
• pp.173-178
• /
• 1998

This study is described the experimental result of the development of artificial aggregate using paper sludge ash and the application of it in concrete. Artificial aggregates are prepared with crushed stone in the variety aspect. Therefore, Quality properties of artificial aggregate using paper sludge ash are fairly corresponded with it of crushed stone. For the application of artificial aggregate using paper sludge ash in concrete, Coarse aggregates are replaced with artificial aggregate using paper sludge ash in the constant of volume(0%, 30%, 70%, 100%). It is conclued from the test results that the artificial aggregate using paper sludge ash could be used replacement of coarse aggregate in concrete. Continuous study should be planned for improvement of it's quality.

• Fashion & Textile Research Journal
• /
• v.8 no.4
• /
• pp.449-457
• /
• 2006

The purpose of this study was to investigate perceived service qualities in cosmetics purchasing and, those difference and consumer satisfaction among cosmetics store types. Data were collected from 276 adult females and analyzed by using frequencies, factor analysis, reliability analysis, ANOVA and duncan test utilizing SPSS WIN 10.0. The results showed that consumers perceived service quality such as reliability and responsiveness, product policy, tangibles, store atmosphere policy, business policy, sales policy to cosmetics store. There were significant differences on service quality among cosmetics store types. Consumers using department stores highly perceived factors such as reliability and responsiveness, product policy, tangibles, store and atmosphere policy, but consumers using common cosmetics store lowly perceived these factors. There were significant differences with regard to use effect and pleasure in using to satisfaction among cosmetics store types. Use effect was revealed the highest to consumers purchasing cosmetics in department stores but the lowest in discount stores. Pleasure in using was revealed the highest consumers using department stores but the lowest common cosmetics store.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1065-1070
• /
• 2009

This paper presents the new technique of modeling using Dynamic Link Library(DLL) in ElectroMagnetic Transients Program - Restructured Version(EMTP-RV) in which we have simplified the procedures of OverCurrent Relay(OCR) modeling. The DLL function is designed to allow EMTP-RV users to develop advanced program model modules and interface them directly and intimately with the EMTP-RV engine. The modeled OCR is verified by simulating the various fault cases in the distribution system. Also, the performance for the modeling of OCR using DLL is compared with that of the method using the control components of EMTP-RV and using EMTP/MODELS. The results show the validity of modeled OCR and the effectiveness of the method using DLL function.

• Journal for History of Mathematics
• /
• v.28 no.1
• /
• pp.15-29
• /
• 2015

This study aims to analyze how the history of mathematics is used in Chinese mathematics textbooks. As a framework for analysis, we categorized nine types of using the history of mathematics in textbooks. We analyzed 18 mathematics textbooks for Chinese elementary and middle schools. As a result, we found that various types of using the history of mathematics were adopted in Chinese textbooks except for explorations of mathematical errors in history. We also noticed three characteristics: preference to using for motivation and reading matters in elementary school levels, high frequencies of using problems from traditional mathematical books and origins of mathematical concepts or symbols, and emphasis on ethnic superiority through the Chinese traditional mathematics. Based on the results of analysis, we discussed and induced some implications for using the history in our mathematics textbooks.

• Journal of Biosystems Engineering
• /
• v.23 no.4
• /
• pp.381-390
• /
• 1998

An algorithm to extract the 3-D geometric information of a static object was developed using a set of 2-D computer vision system and a laser structured lighting device. As a structured light pattern, multi-parallel lines were used in the study. The proposed algorithm was composed of three stages. The camera calibration, which determined a coordinate transformation between the image plane and the real 3-D world, was performed using known 6 pairs of points at the first stage. Then, utilizing the shifting phenomena of the projected laser beam on an object, the height of the object was computed at the second stage. Finally, using the height information of the 2-D image point, the corresponding 3-D information was computed using results of the camera calibration. For arbitrary geometric objects, the maximum error of the extracted 3-D feature using the proposed algorithm was less than 1~2mm. The results showed that the proposed algorithm was accurate for 3-D geometric feature detection of an object.