• 대한전자공학회논문지TC
• /
• 제48권11호
• /
• pp.35-43
• /
• 2011

본 논문에서는 사용자가 각기 다른 구조를 가진 다양한 무선랜 네트워크 (Wireless Local Area Network) 들 간 핸드오버시 사용자에게 끊김 없는 인터넷 연결을 제공하기 위한 새로운 이동성 관리 구조 및 모델을 제시한다. IETF에서는 MIPv6와 이를 확장한 HMIPv6, PMIPv6 등의 많은 이동성 관리를 위한 연구가 진행되었지만 현실적으로 무선 접속점이 서로 다른 개인 관리자 또는 ISP에 의해 관리되고 있기 때문에 접속 인증 방법 및 이동성 프로토콜이 달라 이러한 이동성 관리 프로토콜은 이동 단말의 핸드오버 시 응용 서비스에 대한 QoS (Quality of Service)를 보장 할 수 없다. 이러한 문제점을 해결하기 위해 본 논문에서는 사용자가 무선 네트워크를 생성하여 핸드오버 시 QoS를 보장하는 이동성 관리 방법을 제안한다. 더욱 자세히는, 끊김 없는 인터넷 서비스를 제공하기 위한 사용자 정의 네트워크의 모델, 구조 및 알고리즘을 제시한다. 마지막으로, 네트워크 시뮬레이터 2 (Network Simulator Tool 2)를 이용하여 제안된 알고리즘에 대한 성능 분석을 하였다.

• 한국전산구조공학회논문집
• /
• 제30권4호
• /
• pp.307-312
• /
• 2017

본 연구는 철도 시설의 선로를 대상으로 하여, Building Information Modeling(BIM)을 위한 데이터 모델인 Industry Foundation Classes(IFC)의 유지관리관점의 부분집합인 Construction Operations Building information exchange(COBie)를 통해 철도 시설물 유지관리문서를 생성할 수 있는 방안을 제시하였다. 철도 선로유지관리 문서 생성에 필요한 항목을 정의하기 위해 국토교통부의 선로유지관리지침 분석을 수행하였고, 이를 COBie 스프레드시트에서 참조하기 위한 방식을 정의하였다. 철도 시설물 선로의 유지관리정보 항목을 반영한 정보모델 생성을 위하여 IFC 프레임워크 내의 사용자 정의 속성집합을 활용하였으며, 이를 통해 IFC에서 지원하지 않는 철도 선로에 대한 추가 항목을 생성하였다. BIM 소프트웨어를 통해 추가적으로 생성한 사용자 정의 속성집합을 반영한 IFC 기반의 정보모델을 생성하였고, 이를 정의된 참조방식에 따라 선로 유지관리 정보항목을 COBie 스프레드시트에 전달하고 그 결과를 확인하였다. 이를 통해 IFC 기반의 As-built 모델로부터 COBie 스프레드시트로 정보를 전달함으로써 철도 시설물 유지관리업무를 위해 필요한 문서 생성에 활용할 수 있음을 확인하였다.

• 한국시뮬레이션학회논문지
• /
• 제23권2호
• /
• pp.35-46
• /
• 2014

본 연구는 워게임 모델에 표준전투편성 개념 및 기능을 적용한 최초 연구라고 할 수 있다. 먼저, 기존 워게임 전투편성 기능 연구를 통하여 기존 논문과 연구자료들에서 제시된 워게임 모델들의 전투편성 기능을 분석하였으며, 논리와 연관된 전투편성 기능이 적용된 지상군 자원소요 분석모델의 전투편성 입력절차와 세부 기능을 알아보았다. 둘째, 표준전투편성 기능 및 알고리즘을 개발하여 구현하였다. 개념을 정의하고 기존 전투편성 기능 분석을 통하여 도출된 주요 개발기능을 활용하여 사용자 인터페이스 설계 및 개발된 알고리즘을 구현하였다. 알고리즘은 절차 알고리즘, 표준전투편성 알고리즘, 오류체크 알고리즘으로 구분하여 개발했다. 셋째, 개발된 기능을 활용하여 사용자 입력소요시간과 편리성에 대하여 내용을 측정하여 통계분석을 실시했다. 결론적으로 본 연구는 표준전투편성 개념의 최초 적용 및 기능 구현을 통하여 입력소요시간 단축 및 사용자 편리성을 향상 시켰으며, 새로운 모델기능의 발전가능성을 제시했다는 점에서 큰 의미가 있다고 판단된다.

• Computers and Concrete
• /
• 제33권2호
• /
• pp.147-162
• /
• 2024

This study presents a random-aggregate mesoscale model integrating the random distribution of the coarse aggerates and the damage mechanics of the mortar and interfacial transition zone (ITZ). This mesoscale model can generate the random distribution of the coarse aggregates according to the prescribed particle size distribution which enables the automation of the current methodology with different coarse aggregates' distribution. The main innovation of this work is to propose the "correction factor" to eliminate the dimensionally dependent mesh sensitivity of the concrete damaged plasticity (CDP) model. After implementing the correction factor through the user-defined subroutine in the randomly meshed mesoscale model, the predicted fracture resistance is in good agreement with the average experimental results of a series of geometrically similar single-edge-notched beams (SENB) concrete specimens. The simulated cracking pattern is also more realistic than the conventional concrete material models. The proposed random-aggregate mesoscale model hence demonstrates its validity in the application of concrete fracture failure and statistical size effect analysis.

• 산업공학
• /
• 제16권spc호
• /
• pp.21-27
• /
• 2003

Objective of this paper is to develop the user mobility model(UMM) which is used for the performance analysis of location update and paging algorithm and at the same time, consider the user mobility pattern(UMP) in zone-based cellular networks. User mobility pattern shows correlation in space and time. UMM should consider these correlations of UMP. K-dimensional Markov chain is presented as a UMM considering them where the states of Markov chain are defined as the current location area(LA) and the consecutive LAs visited in the path. Also, a new two dimensional Markov chain composed of current LA and time interval is presented. Simulation results show that the appropriate size of K in the former UMM is two and the latter UMM reflects the characteristic of UMP well and so is a good model for the analytic method to solve the performance of location update and paging algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권3호
• /
• pp.1065-1085
• /
• 2020

With rapid growth of content demands, device-to-device (D2D) content sharing is exploited to effectively improve the service quality of users. Considering the limited storage space and various content demands of users, caching schemes are significant. However, most of them ignore the influence of the asynchronous content reuse and the selfishness of users. In this work, the user preferences are defined by exploiting the user-oriented content popularity and the current caching situation, and further, we propose the social-aware rate, which comprehensively reflects the achievable contents download rate affected by the social ties, the caching indicators, and the user preferences. Guided by this, we model the collaborative caching problem by making a trade-off between the redundancy of caching contents and the cache hit ratio, with the goal of maximizing the sum of social-aware rate over the constraint of limited storage space. Due to its intractability, it is computationally reduced to the maximization of a monotone submodular function, subject to a matroid constraint. Subsequently, two social-aware collaborative caching algorithms are designed by leveraging the standard and continuous greedy algorithms respectively, which are proved to achieve different approximation ratios in unequal polynomial-time. We present the simulation results to illustrate the performance of our schemes.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권3호
• /
• pp.107-116
• /
• 2005

The paper addresses modeling and analysis of a grid-connected photovoltaic generation system (PV system). PSCAD/EMTDC, an industry standard simulation tool for studying the transient behavior of electric power system and apparatus, is used to conduct all aspects of model implementation and to carry out extensive simulation study. This paper is aimed at sharing with the PSCAD/EMTDC user community our user-defined model for PV system applications, which is not yet available as a standard model within PSCAD/EMTDC. An equivalent circuit model of a solar cell has been used for modeling solar array. A series of parameters required for array modeling have been estimated from general specification data of a solar module. A PWM voltage source inverter (VSI) and its current control scheme have been implemented. A maximum power point tracking (MPPT) technique is employed for drawing the maximum available energy from the PV array. Comprehensive simulation results are presented to examine PV array behaviors and PV system control performance in response to irradiation changes. In addition, dynamic responses of PV array and system to network fault conditions are simulated and analysed.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1995년도 추계학술대회논문집
• /
• pp.214-218
• /
• 1995

A lot of design guidelines have been proposed for menu-drive interfaces, but they are applicable only to the menus on ordinary CRT displays. Many hardware products, however, cannot employ large displays because of the cost and space limitations. Instead, a single-line display menu (SDM) is widely used, and the designers need useful guidelines applicable to the SDM. A focus is often placed upon the optimal menu structure, but only the standard menu structures, such as $64^{\1}, 8^{\2}, 4^{\3}, and 2^{\6}$, are tested for optimality. In many cases, however, ill defined or asymmetric structures are suggested as design alternatives. To determine the optimal menu structure, user performance should be obtained in terms of quantitative measures for each of the optional structures considered. Hence, a model is needed to provide a predicted value of user performance for a given menu structure. Although severaal models have been proposed for ordinary menus, none is available for the SDM yet. A performance model was developed in this study using the neural network approach. A The model developed in this study is capable of providing quantiative measures of human performance for any menu structures without conducting additional experiments, which will save much time and reduce the design cost.

• 전기학회논문지
• /
• 제56권2호
• /
• pp.240-247
• /
• 2007

This paper presents an implementation of the generator protective relay using Real Time Digital Simulator (RTDS) user defined component (UDC) model designed to facilitate the investigation and evaluation of protective relays. The UDC for RTDS is a convenient model that allows user to develop new component models and run them on the RTDS. The developed model has major features related to the development of six models such as distance, frequency, reverse power, volts per Hz, over voltage, and out-of-step relays. Also, the generator relay models have been used to support and enhance power engineering education at both the undergraduate and graduate levels. The developed model functions are verified and tested by both static test and dynamic test. The simulation results show the capabilities of the developed generator relay using RTDS UDC.

• 소성∙가공
• /
• 제22권6호
• /
• pp.303-309
• /
• 2013

Spring-back of MS1470 steel sheets was numerically predicted using a non-linear kinematic hardening material behavior based on the Yoshida-Uemori model. From uniaxial tension and uniaxial tension-compression-tension data as well as the uniaxial tension-unloading-tension data, the parameters of the Yoshida-Uemori model were obtained. For the numerical simulations, the Yoshida-Uemori model was implemented into the commercial finite element program, ABAQUS/Explicit and ABAQUS/Standard using the user-defined material subroutines. The model performance was validated against the measured spring-back from the benchmark problems of NUMISHEET 2008 and NUMISHEET 2011, the 2-D draw bending test and the S-rail forming test, respectively.