• 한국초등과학교육학회지:초등과학교육
• /
• 제23권4호
• /
• pp.287-296
• /
• 2004

이 연구에서는 초등학교 과학과 수업 분석을 통하여 초등 과학 수업의 개선을 위한 시사점을 도출해 내고자 하였다. 교수-학습 방법에 중점을 두어 7개의 수업 사례를 관찰하고 분석하였다. 수업 관찰 결과, 초등학교 과학 수업에서는 실험이나 활동을 한 뒤에 정리하고 토의할 시간이 부족하고 교사의 적절한 안내가 이루어지지 않아서 실험이나 활동 결과를 학습목표와 관련지어 이해하는 데 어려움이 있었다. 그리고 관찰 관점이나 실험 방법에 대한 안내가 부족하였고, 실험 기구를 올바르게 사용하는 방법과 유의할 점, 실험 기구를 사용하는 이유 등에 대한 안내가 충분히 이루어지지 않았다. 이러한 문제점을 개선하기 위하여 관찰 관점, 실험 기구의 용도와 사용법 등에 대한 교사의 안내 활동을 강화하고 실험 결과에 대한 논의가 충분히 이루어지도록 하기 위한 방안을 모색할 필요가 있다.

• 대한치과보철학회지
• /
• 제38권1호
• /
• pp.108-115
• /
• 2000

This study was designed to compare the effect of polishing on surface roughness of composite resin. We used Z100(3M) composite resin and placed the composite resin in the hole (4mm thick and 4mm in diameter) of vinyl plate and polymerized it under manufacturer's instructions. Samples were divided into 5 groups by polishing methods. Group 1 was control: resin was polymerized under glass plate, Group 2: resin was polymerized without any polishing procedure, Group 3: resin was polymerized with a polishing procedure of abrasive disc, Group 4: bonding agent was applyed in thin layer and polymerized on the polished polymerized resin surface. Group 5: resin was polymerized under transparent celluloid strip. The surface roughness of each specimen was measured with Sufacoder SEF-30D (Kosaka lab. Ltd) under 0.08mm cut off, 0.05mm/s stylus speed, ${\times}40$ horizontal magnification, ${\times}5000$ vertical magnification. The results were as follows : 1. Group 1 showed the most smooth surface in this study. 2. Group 3 showed more rough surface than Group 2. Considering the surface roughness, it would be better to make the shape completely before polymerize the resin. To finish and polish after the polymerization of resin makes less smooth surface. 3. When we use the transparent celluloid strip, minimum finishing procedures are recommended. Any polishing procedure could not recover the smooth resin surface of celluloid strip. 4. Application and polymerization of the thin layer of bonding agent on the polished surface showed the minimum surface smoothing effect.

• 한국인터넷방송통신학회논문지
• /
• 제18권5호
• /
• pp.229-235
• /
• 2018

ARM은 2016년 현재 매일 4천만 개씩 선적되고 있으며 860억 개 이상 이동통신, 가전, 기업, 임베디드 시스템 분야에서 탑재되어 널리 이용되고 있다. 국내의 반도체 기술은 메모리 반도체 설계에 있어서는 세계 최고의 수준이나, 프로세서의 설계는 그에 미치지 못하여 메모리와 프로세서의 균형있는 발전을 이루지 못하고 있다. 일반적으로 프로세서를 설계할 때는 고가의 전용 소프트웨어의 필요로 인하여 환경을 갖추기가 어렵다. 그러나 최근에 Altera에서 제공하는 ModelSim은 무료로 누구나 이용할 수 있다. 본 논문에서는 유럽 및 전 세계의 대학 및 연구소에서 ASIC 설계에 널리 쓰이는 VHDL을 이용하여 32 비트 ARMv4 계열의 프로세서를 설계하고, ModelSim으로 모의실행하였다. 그 결과, ARM의 37 개 명령어를 성공적으로 수행할 수 있었다.

• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.148-154
• /
• 2015

Computer aided process planning (CAPP) keeps an important role between the design and manufacturing engineering processes. A CAPP system is a digital link between a computer aided design (CAD) model and manufacturing instructions. CAPP have been researched and applied in manufacturing filed, however, one manufacturing area where CAPP has not been extensively researched is rapid prototyping (RP). RP is a technique for creating directly a three dimensional CAD data into a physical prototype. RP enables to build physical models automatically and to use to reduce the time for the product development cycle as well as to improve the final quality of the designed product. Three-dimensional (3D) printing is one kind of RP that creates three-dimensional objects from CAD models. The paper presents a computer aided process planning system for printing medical products. 3D printing has been used to solve complex medical problems such as surgical instruments, bioengineered products, medical implants, and surgical guides.

• 한국중재학회지:중재연구
• /
• 제16권2호
• /
• pp.213-238
• /
• 2006

Deferred payment letter of credit is the L/C that makes the issuing bank to pay a beneficiary at maturity stipulated in the credit. In this deferred payment letter of credit transaction, is it possible that a confirming or nominating bank payor negotiate before maturity? and the confirming or nominating bank have legal protection when paid or negotiated before maturity? These problems are raised in argument. By the way, Korea, Switzerland, Germany, and Italy are positive on the above question, but France, United Kingdom, and Singapore are negative. Therefore, when using deferred payment letter of credit, it is required to keep in mind that the understanding of maturity stipulated in the credit is different among countries, legal principles of each nations, and researchers. And other problems are raised also as follows; the application of Fraud Rule and principle of independence and abstraction as nature of credit, when to pay credit amount to beneficiary, and refusal of payment due to poor quality. Finally, it is required to use deferred payment letter of credit, after full understanding of deferred payment letter of credit pointed out in this paper.

• 기본간호학회지
• /
• 제24권1호
• /
• pp.60-71
• /
• 2017

Purpose: The purpose of this study was to develop video assisted education on bowel preparation for colonoscopy (VEBPC) and use a snartphone to evaluate effects of the VEBPC. Methods: Adult patients who were scheduled for colonoscopy were recruited from a university general hospital and randomly assigned to three groups. Group 1 (n=30) watched the video using a computer set in the endoscope consulting room. Group 2 (n=29) watched it using a smartphone, and group 3, the control group (n=29) received education with existing instructions at the reservation-reception desk. Participants were evaluated on knowledge on taking bowel preparation agents and diet, compliance on taking bowel preparation agents and diet, satisfaction with education, and actual level of bowel preparation. Results: Group 1 and 2 showed significantly (p<.001) higher scores for knowledge, compliance, and satisfaction compared to the control group. However, in post-hoc test analyses there were no significant differences in these variables between group 1 and 2. No significant difference was found in the actual level of bowel preparation among the three groups. Conclusion: Findings from this study show that VEBPC using smartphone is a better option than existing educational methods. However, replication studies are necessary to confirm these findings.

• 한국BIM학회 논문집
• /
• 제7권4호
• /
• pp.1-7
• /
• 2017

Since its beginning the military has continued updating its equipments and facilities by modernizing and expanding them. However, with rapidly growing technologies and business management skills, the time for military facilities' evolvement seems unavoidable. The Defense Installations Agency (DIA) has come to a conclusion that application of BIM is necessary. Since its decision, the DIA has been researching the use of BIM and developing guidelines for its application. Nevertheless, the speed of instructions and practical implementation of its model have been behind its plan due to various reasons. To overcome its limitations, the DIA has come up with three-step-solution: basic experience, budgeting, and expansion. Due to numerous number of projects of BIM, it is almost impractical to implement all of them concurrently. The methodological approach of the research employs the Delphi survey method to quantitatively analyze qualitative information drawn from experts' opinions. By applying the Delphi survey method, the first round of the survey drew lists of constraints, BIM application scenarios as well as BIM promotion measures. Afterwards, at the second round of the survey, criticality of each item collected at the 1st round was analyzed to reach a conclusion. Finally, constraints against BIM application were analyzed, and BIM application scenarios and promotion measures for the BIM were introduced.

• The Journal of Korean Physical Therapy
• /
• 제27권2호
• /
• pp.112-117
• /
• 2015

Purpose: The purpose of this study was to examine the effects of a task-specific obstacle crossing rehabilitation program on functional gait ability in patients with cerebellar ataxia. Overall, we sought to provide ataxia-specific locomotor rehabilitation guidelines for use in clinical practice based on quantitative evidence using relevant analysis of gait kinematics including valid clinical tests. Methods: Patients with cerebellar disease (n=13) participated in obstacle crossing training focusing on maintenance of dynamic balance and posture, stable transferring of body weight, and production of coordinated limb movements for 8 weeks, 2 times per week, 90 minutes per session. Throughout the training of body weight transfer, the instructions emphasized conscious perception and control of the center of body stability, trunk and limb alignment, and stepping kinematics during the practice of each walking phase. Results: According to the results, compared with pre-training data, foot clearance, pre-&post-obstacle distance, delay time, and total obstacle crossing time were increased after intervention. In addition, body COM measures indicated that body sway and movement variability, therefore posture stability during obstacle crossing, showed improvement after training. Based on these results, body sway was reduced and stepping pattern became more consistent during obstacle crossing gait after participation in patients with cerebellar ataxia. Conclusion: Findings of this study suggest that task-relevant obstacle crossing training may have a beneficial effect on recovery of functional gait ability in patients with cerebellar disease.

• The Journal of Korean Physical Therapy
• /
• 제27권2호
• /
• pp.81-84
• /
• 2015

Purpose: The purpose of this study was to compare the effect of 'knowledge of result' and 'knowledge of performance', two types of extrinsic feedbacks, during the sit-to-stand movement in children with hemiplegic cerebral palsy. Methods: A total of ten children with hemiplegic cerebral palsy (ages 8 to 12 years) were recruited for the study. Subjects with hemiplegic cerebral palsy performed sit-to-stand movement in front of a mirror. Their performance was supervised and revised for normal movement by a pediatric physiotherapist. In the knowledge of the result, subjects performed sit-to-stand using a chair with an armrest in their mind with normal movement. In the knowledge of performance, subjects performed sit-to-stand under verbal instructions. Randomized cross over trials were used in this study. Main outcome measurements were as follows: mediolateral speed, anteroposterior speed, velocity moment, extent in mediolateral direction, extent in anteroposterior direction, and vertical distance of the center of pressure. Results: The mediolateral speed and extent of center of pressure was higher for 'knowledge of performance' in comparison with the other type of extrinsic feedbacks (p<0.05). The other parameters, including anteroposterior speed and extent, and vertical speed of the center of pressure, did not differ between the two types of extrinsic feedbacks (p>0.05). Conclusion: These findings suggested that training in sit-to-stand movement with 'knowledge of result' may result in better use of extrinsic feedback.

• 융합신호처리학회논문지
• /
• 제5권1호
• /
• pp.40-45
• /
• 2004

본 논문에서는 병렬 분산제어 방식을 이용한 곡면유리 자동성형 시스템을 개발한다. 설계된 시스템은 PC, 하나의 주제어기, 그리고 11개의 서보제어기로 구성된다. 각 요소들은 RS-232C와 8비트 데이터 버스로 연결된다. 안정성과 제어성능을 고려하여 정밀 PID 모션제어기 프로세서와 DC모터 제어에 사용되는 H-브리지를 사용한다. 설계된 시스템에서, PC는 주어진 곡률반경에 대한 각 구조물의 위치 값을 계산하고 이 값에 대응하는 모터 회전 데이터를 계산하며 작업자의 조작 입력을 위한 사용자 인터페이스를 제공한다. 주제어기는 PC로부터 동작 명령과 제어 파라미터를 받아 버스 통신방식을 이용하여 이를 각 서보제어기로 전달하며 서보제어기는 주제어기로부터 넘겨받은 동작명령과 제어 파라미터를 이용하여 각 모터에 대하여 PID제어를 수행한다.