• Journal of the Korea Computer Industry Society
• /
• v.8 no.4
• /
• pp.221-228
• /
• 2007

Many kinds of microcontrollers such as 8051, PIC16 and Atmega series are used for the automatic control system, home appliances and communication equipments manufacturing. It is very important to understand the basic operational principles of microcontrollers and their design concepts. There are many kinds of educational microcontroller trainers and also they are designed and assembled very complicatedly. For the students or developers, it is very difficult to catch the basic operation schemes and apply the techniques to the control system. And also it requires much cost and time for the various kinds of trainers purchasing. In this paper, standardization of pins layout and peripheral modules for the general microcontroller usage was introduced and tested with 89C2051, 89C51, PIC16F84, PIC16F877, Atmega8535 and Atmega128, etc. As a result of test, it was found that saving the cost and time using this suggested device was possible. And also it was very effective way to understand microcontroller design and programming techniques.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.291-294
• /
• 2003

The Water resources utilization pattern of Jangsung reservoir was studied. The observed precipitation and existing reservoir operation data such as irrigation amount, reservoir storage, river maintenance requirement, flood control discharge were collected for ten years period and analyzed. Major findings of this study are as follows: The observed average, minimum, maximum annual precipitation were 905.1mm, 1,977.3mm, 1,554.3mm during study period, respectively. The average annual irrigation amount was 554.5mm, irrigation amount of drought years of '92 and '94 was 604.6mm, 679.2mm, respectively. However, irrigation amount of extended drought year '95 was 384.9mm. It showed that supplying capacity of Jangsung reservoir was limited when consecutive 2 year drought occurred. The main water resources usage of Jangsung reservoir was irrigation, but flood control discharge exceed irrigation amount exceptionally when high precipitation occurred. The reservoir operation record revealed that discharge for river maintenance was delivered even drought years.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.121-124
• /
• 1996

Recently, the importance of the network using Fieldbus is being increased in an implementation of factory automation system. In spite of expanding the concept and products of Fieldbus, it is not widely used yet. This is partly due to the lack of the standard specification and the relatively low performance with respect to the cost. So, in order to expand the usage of the Fieldbus, not only the standardization effort, but. also the increase of performance is needed. In this paper, the method which increases the performance of Fieldbus by reforming of the sensor and the actuator data is thoroughly estimated and evaluated when the assumptions about the real-time characteristics of a robot workcell as an example of the ICCS(Integrated Communication and Control System) are sustained.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.9
• /
• pp.947-953
• /
• 2011

Radome aberration error causes degradation of miss distance as well as stability of high maneuver missile system with RF seeker. A study about radome compensation method is important in this kind of missile system design. Several kinds of methods showed good compensation performance in their paper. Proposed adaptive Particle filter estimates line of sight rate excluding the radome induced error. This paper shows effectiveness of adaptive Particle filter as compensation method of radome aberration error. Robust performance of this filter depends on external aiding measurement, target acceleration. Tuning of system error covariance can make this filter unsensitive against the error of target acceleration information. This paper demonstrates practical usage of adaptive Particle filter for reducing miss distance and increasing stability against disturbance of radome aberration error through performance analysis.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.774-778
• /
• 2008

The inaccuracy of inertial sensors used in low cost IMU's limits the usage to ARS, at best. Sensor fusion technologies are widely used to overcome this problem. GPS is the most popular secondary sensor, but GPS alone cannot fully compensate the IMU errors in the initial alignment process and rectilinear flights. This paper presents a new concept of aiding the low cost IMU with the sun line of sight vector. The simulation and experimental results in this paper proves that aiding of INS/GPS with the sun line of sight vector increases the observability and improves accuracy remarkably.

• Earthquakes and Structures
• /
• v.18 no.3
• /
• pp.313-320
• /
• 2020

The usage of conventional tuned mass damper (TMD) was proved as an effective method for passive mitigating vortex-induced vibration (VIV) of a bridge deck. Although a variety of linear TMD systems have been so far utilized for vibration control of suspension bridges, a sensitive TMD mechanism to wind spectrum frequency is lacking. Here, we introduce a bistable tuned mass damper (BTMD) mechanism which has an exceptional sensitivity to a broadband input of vortex shedding velocity for suppressing VIV in suspension bridge deck. By use of the Monte Carlo simulation, performance of the nonlinear BTMD is shown to be more efficient than the conventional linear TMD under two different wind load excitations of harmonic (sinusoidal) and broadband input of vortex shedding. Consequently, an appropriate algorithm is proposed to optimize the design parameters of the nonlinear BTMD for Kap Shui Mun Bridge, and then the BTMD system is localized for the interior deck of the suspension bridge.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.4
• /
• pp.199-204
• /
• 2003

This paper proposes reconfigurable hardware structures for spreading and scrambling of multi-mode CDMA systems. The proposed reconfigurable structures supporting IS-95, cdma2000 and WCDMA, include a pseudo noise code generator, a channelization code generator and a control circuit for signal flow control. The proposed reconfigurable structures provide an efficient hardware usage for multi-mode CDMA systems. The synthesis results show the area reduction about 24.7% compared with the original code generators. The proposed structures can provide efficient reconfigurability and high speed operations for future SDR systems.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.386-389
• /
• 2002

It may be necessary to apply a daily fever to operate the municipal solid waste landfill. The daily cover helps to control nuisance factors such as the escape of odors, dusts and airborne emissions, and can control the population of disease vectors. Also it may be reduce the infiltration of rain, decreasing the generation of leachate and the potential for surface water and groundwater contamination. Because of its usual availability and traditional usage as the municipal solid waste landfill, soil remains as the most common daily cover material. However, soil tends to reduce the volume of dumping waste c;3pacity in the landfill, it also reduces a period of using in the landfill. Therefore, it is necessary to research about Alternative Daily Cover Materials (ADCMs) because of the limitation of landfill sites. Recently, The types of ADCMs are classified into geosynthetics, forms, spray-ons, indigenous materials. In this study, the authors have tested the spray type of Alternative Daily Cover(ADC) using by flyash, alum with cement. The development. of ADCMs will be highly effective in terms of prolongation using landfill.

• International journal of advanced smart convergence
• /
• v.2 no.1
• /
• pp.30-31
• /
• 2013

In the recent years, as smart phones popularized, the number of people who use IMS (instant messaging service) and SNS (social network service) rapidly has increased as the usage of SMS (short message service) relatively decreased. That is why this thesis suggests a contact control service based on Android. It contains an inducing function that calls acquaintances, which were given a score based on the level of familiarity from saved contacts and call logs. And it provides an overall ranking of call log in order to grasp frequently called people. This developed system was tested on Samsung Galaxy S2 and LG Optimus LTE / Android 2.2 which were the main smart phone models.

• Journal of Drive and Control
• /
• v.9 no.2
• /
• pp.46-53
• /
• 2012

This paper explains how eliminating contamination from the manufacturing processes will lead to better product quality and hence the need for reworking, a trouble free commissioning period and greatly improved production efficiency. All of these will reduce costs and energy usage. It will also ensure that the product is delivered to the customer in a condition that will ensure improved reliability and longer life, again reducing both energy and other operating costs. Correctly designing the contamination control measures will achieve and maintain the level of fluid cleanliness that is required by the end user. The filter is critical to cleanliness management and should be selected with the same degree of thought and consideration as for other major components. This paper explains the role that Cleanliness Management plays in the reducing the carbon footprint of systems and processes by making them perform more efficiently for longer periods. It also examines two differing ways of selecting filters to incorporate the features of newer designs, and shows how significant savings in the costs of ownership can be achieved using these approaches.