• 한국가구학회지
• /
• 제11권2호
• /
• pp.73-78
• /
• 2000

This study was carried out to measure formaldehyde emission with the passing of two years from plywood, sliver-board and strand-board bonded with urea resins which were made of 6 f/U molar ratios. The urea resins were manufactured by six kinds of formaldehyde/urea molar ratio of 1.0, 1.2, 1.4, 1.6, 1.8 and 2.0. 1. The plywood with molar ratio of 1.0 satisfied the KS F3101 $F_2$ directly after manufacture. The plywood with molar ratio of 1.2 satisfied m 3 days. The plywood with molar ratio of 1.4 satisfied the $F_3$ in 3 days and the $F_2$ in 600 days. And the plywood with molar ratio of 1.8 and 2.0 satisfied the $F_3$ in 365 days, but didn't satisfy the $F_2$ in 730 days. 2. Sliver-board with molar ratio of 1.0 and 1.2 satisfied the KS F3104 $E_2$ right after manufacture. Sliver-board with molar ratio of 1.4 and 1.6 satisfied in 150 and 360 days, respectively. Sliver-board with molar ratio of 1.8 and 2.0 satisfied in 730 days. 3. Strand-board with molar ratio of 1.0 and 1.2 satisfied the KS F3104$ E_2$ directly after manufacture. Strand-board with molar ratio of 1.4 and 1.6 satisfied in 150 days. But Strand-board with molar ratio of 1.8 and 2.0 didn't satisfied in 730 days.

• Journal of the Korean Wood Science and Technology
• /
• 제35권6호
• /
• pp.108-117
• /
• 2007

생장 기간이 매우 빠르고 섬유방향의 강도적 성질이 우수한 대나무를 합판의 원료로 이용하기 위하여 케루잉단판-솜대 zephyr 복합 패널(WBCB)의 제조 조건(수지접착제의 종류, 도포량, 도포방법)이 패널의 성능에 미치는 영향을 검토하였다. 수지의 종류에 따른 5-ply WBCB의 성능은 폴리메릭 이소시아네이트수지(PMDI)가 가장 좋은 결과를 나타내었으며, 이어 페놀수지(PF), 페놀 멜라민수지, 요소 멜라민수지 및 요소수지의 순이었다. 사용한 수지 중 강도적 측면과 작업성을 고려할 때 PF 수지에 의한 복합 패널 제조가 가장 적절한 것으로 생각된다. PF수지를 사용하여 제조한 12 mm 두께의 5-ply WBCB의 경우, 수지의 도포량이 증가하면 패널의 성능도 향상되는 경향이었다. 또한 박리강도 측정 후의 파괴양상은 도포량이 증가함에 따라 대나무 외층-대나무 내층 경계층의 파괴가 증가한 데 반하여 대나무 제퍼 내부층의 파괴는 상대적으로 감소하였다. 따라서 WBCB 제조시 수지가 다소 zephyr 내부까지 침투할 정도의 수지 도포량이 적절한 것으로 생각되며, 표면 단판의 오염성과 경제성 등을 고려할 때 $320g/m^2$이 가장 적합한 것으로 판단된다. 동일한 PF수지 도포량에서 수지의 도포방법을 달리하여 제조한 5-ply 복합 패널의 성능은 양면과 편면 스프레이 도포 간과 스프레이와 롤러에 의한 도포방법 간에 현저한 차이가 나타나지 않아 주어진 환경에서 작업성이 좋은 도포방법을 채택하면 될 것으로 생각된다.

• Journal of the Korean Wood Science and Technology
• /
• 제28권4호
• /
• pp.83-93
• /
• 2000

This study was carried out to improve the physico-mechanical properties of board products by applying the technique of high frequency heating, and find out the optimum conditions of high frequency heating, compared with the technique of hot platen heating. The possibility of isocyanate resin application to board production was also considered to solve the problem of free formaldehyde emission from urea resin which is generally used in wood industry. For this study, 30 mm thick MDP (medium density fiberboard) with isocyanate resin were manufactured by the techniques of hot platen heating, high frequency heating and the combination techniques of both heating methods, and compared in several point of views.

• Journal of the Korean Wood Science and Technology
• /
• 제34권5호
• /
• pp.29-41
• /
• 2006

This study was to investigate the effect of adding additive as tannin, rice husk and charcoal, for reducing the formaldehyde emission level, on the adhesion properties of urea-formaldehyde (UF) resin for particleboard. We controlled the hot-pressing time, temperature and pressure to determine the bonding strength and formaldehyde emission. Blends of various UF resin/additives (tannin, rice husk and charcoal) compositions were prepared. To determine and compare the effect of additives (tannin, rice husk and charcoal) content, 0, 5, 10 and 15%, by weight of UF resin, were used. $NH_4Cl$ as hardener added. To determine the level of formaldehyde emission, we used the desiccator, perforator and 20 L-small chamber method. The formaldehyde emission level decreased with increased additions of additive (except rice husk). Also, increased hot-pressing time decreased formaldehyde emission level. At a charcoal replacement ratio of only 15%, the formaldehyde emission level is under F ✩ ✩ ✩ ✩ grade (emit < $0.3mg/{\ell}$). Curing of the high tannin additive content in this adhesive system indicated that the bonding strength increased. But, in the case of rice husk and charcoal, the bonding strength was much lower due to the inorganic substance. Furthermore, rice husk was poor in bonding strength as well as formaldehyde emission than tannin and charcoal.

• Journal of the Korean Wood Science and Technology
• /
• 제30권4호
• /
• pp.23-26
• /
• 2002

현재 폐목재의 발생량은 국내의 연간 목재사용량의 40% 정도의 수준으로 국내의 목재자급율을 고려해볼 때, 목재패널산업에서의 이런 폐목재의 재활용은 많이 장려되어야 한다. 본 연구는 폐목재로부터 얻어진 파티클과 실험실에서 합성한 요소수지를 폐목재파티클의 전건무게에 대해 6% 첨가하여 열압온도 162℃와 열압시간 5분에서 파티클보드를 제조하고 ASTM D 1037 방법에 의해 파티클보드의 성능을 평가하였다. 파티클보드의 성능을 평가한 결과는 KS F 3104 파티클보드 8.0형의 최소요구를 만족시키는 것이다. 이런 파티클보드의 성능평가 결과는 폐목재가 파티클보드의 원료로 적합하다는 것을 보여준다.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.86-89
• /
• 2015

Sugar cane, renewable fiber resources, were used for roof tile production. Urea formaldehyde, phenol formaldehyde and isocyanate resin were used as binders in this study. Roof tile specimens with 400 mm wide, 400 mm long and 5 mm thick were prepared by compression molding. Physical and mechanical properties of the specimens were analyzed by water absorption, thickness swelling, thermal conductivity, density, modulus of rupture and modulus of elasticity. From the results, water absorption at 1 and 24 hours was 19-47 % and 38-57 %, respectively. Thickness swell at 24 hours was 15-29%. Thermal conductivity was 0.016, 0.017 and 0.019 W/m.K when using isocyanate, urea formaldehyde and phenol formaldehyde, respectively. Density of the specimens was 770-860 kg/m3. Modulus of rapture was 255-280 MPa. Modulus of elasticity was 5.1-7.6 GPa. Physical and mechanical properties of the specimens indicated that they would be applied for roof tile and construction.

• 한국가구학회지
• /
• 제10권1호
• /
• pp.23-32
• /
• 1999

The ultrastructural characteristics of shear fracture surfaces of laminated wood prepared from major four Korea wood specimens were examined. Commercial urea and urethan resin were used as adhesives for laminated woods of both homospecies and heterospecies. The morphology of fracture surface was observed using an optical microscopy and scanning electron microscopy. Three anatomical failure types were recognized : intercell failure, intrawall failure and transwall failure. In dry specimen, failure occurred mainly in woods. Laminated woods of softwoods showed mostly intrawall failure and transwall failure of tracheids, and them of hardwoods indicated mainly intrawall failure and interwall failure. Laminated woods prepared with urethan resin showed coarse fracture surface, on the other hand, those prepared with an urea formaldehyde resin had clean surface. In wet specimen, failure occurred dominantly in glue line. Intrawall failure and flags were characterized in laminated wood prepared with urethan resin. In heterospecies laminated woods, failure was occurred mainly in softwood. Consequently, fracture morphology of laminated wood may be influenced by adhesives, moisture content, species and anatomical characteristics.

• Journal of the Korean Wood Science and Technology
• /
• 제45권4호
• /
• pp.444-455
• /
• 2017

This study was conducted to evaluate the effect of panel density and resin content on properties of medium density fiberboard (MDF) to obtain some insights on MDF properties as a function of panel density and resin content. MDF panels with different panel densities such as 650, 700, 750 and $800kg/m^3$ were manufactured by adjusting the amount of wood fibers in the mat forming. MDF panels were also fabricated by spraying 8, 10, 12, and 14% of urea-formaldehyde (UF) resins onto wood fibers in a drum-type mechanical blender to fabricate MDF panels with a target density of $650kg/m^3$. As the panel density and resin content increased, the internal bonding (IB) strength of MDF panel consistently increased. Modulus of rupture (MOR), modulus of elasticity (MOE) and screw withdrawal resistance (SWR) had a similar trend to the IB strength. In physical properties, thickness swelling (TS) and water absorption (WA) decreased with an increase in both panel density and resin content. In addition, the formaldehyde emission (FE) which increased as the panel density and resin content became greater. In overall, the panel density of MDF had more significant effect than the resin content in all properties of MDF panels, indicating that it was better to adjust the panel density rather than the resin content for MDF manufacture.

• 접착 및 계면
• /
• 제9권1호
• /
• pp.28-34
• /
• 2008

요소 수지와 변성 비닐계 수지의 혼합비에 따라 200 : 0, 180 : 20, 140 : 60, 100 : 100 으로 파티클보드를 제작하였다. 제조된 파티클보드는 변성 비닐계 수지의 비율이 증가수록 함수율과 밀도가 약간 감소하였다. 기계적 특성은 휨강도의 경우 변성 비닐계 수지 첨가로 인해 파티클보드의 전체적인 휨강도는 증가하였으나 박리강도는 약간 감소하였다. VOC Analyzer를 이용하여 방산실험을 한 결과 실험 종료 후, 4 VOCs의 값이 $294{\mu}g/L$, $1435{\mu}g/L$, $1272{\mu}g/L$ 정도로 저감되었다. 또한 FLEC을 이용하여 TVOC, 5 VOCs, 포름알데히드의 방산 실험 결과 요소수지만으로 만들어진 파티클보드의 방산값이 각각 $1.392mg/m^2h$, $0.0259mg/m^2h$, $0.179mg/m^2h$ 정도를 나타내었다. 요소수지와 변성 비닐계 수지의 혼합비를 동일하게 하여 제조된 파티클보드로부터 방산된 경우 $0.235mg/m^2h$, $0.0033mg/m^2h$, $0.105mg/m^2h$ 로 저감되었다.

• 접착 및 계면
• /
• 제10권4호
• /
• pp.199-206
• /
• 2009