• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.12
• /
• pp.1710-1718
• /
• 2016

The objective of this study was to evaluate the effects of supplements with different crude protein (CP) contents on grazing cattle intake, digestibility, ruminal fermentation pattern, and nitrogen (N) metabolism characteristics during the rainy season. Five ruminal and abomasal cannulated Holstein${\times}$Zebu steers (296 kg body weight, BW) were used in a $5{\times}5$ Latin square design. The animals grazed five signal grass paddocks (0.34 ha). The five treatments evaluated were: Control (no supplement) and 1.0 g of supplement/kg BW with 0, 330, 660, and 1,000 g of CP/kg as-fed. The supplement was composed of starch, soybean meal, urea, and ammonium sulphate. There was a positive linear effect ($p{\leq}0.033$) of the CP content in the supplements on the organic matter (OM), CP, and digested OM intakes. The provision of supplements did not increase ($p{\geq}0.158$), on average, total and ruminal digestibilities of OM and CP. However, the increase in CP content in the supplements caused a positive linear effect ($p{\leq}0.018$) on ruminal digestibilities of OM and CP. Additionally, a quadratic effect of the CP contents of the supplements were observed (p = 0.041) for the ruminal digestibility of neutral detergent fiber corrected for ash and protein, with the highest estimate obtained with the CP content of 670 g/kg. The supply of supplements increased (p<0.001) the ruminal ammonia N concentration, which also changed linearly and positively (p<0.001) according to increase in CP content in the supplements. The apparent N balance and relative N balance (g/g N intake) were not, on average, changed ($p{\geq}0.164$) by the supplements supply. However, both showed a tendency of a linear increase ($p{\leq}0.099$) with increasing supplement CP content. The supplements increased (p = 0.007) microbial N production in the rumen, which also changed linearly and positively (p = 0.016) with increasing supplement CP content. In conclusion, protein supplementation in grazing cattle during the rainy season, while stimulating voluntary forage intake, results in higher efficiency of N utilization when compared to energy supplementation. This is a possible response to increased microbial protein synthesis in the rumen and improved N status in the animal body.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.4
• /
• pp.295-304
• /
• 2015

To develop a technique for efficient management of fertility for cucumber in greenhouse, a quick test method to quantify nitrate ($NO_3{^-}$) content in soil solution and leaf petiole juice using a simple instrument that are easy to use for farmers was investigated. N fertilizer (urea) was applied at 0, 50, 100 and 200% levels of the recommended application rate from 30 days after transplanting to harvest by soil fertigation treatments. Stable results were obtained from analysis of nitrate ($NO_3{^-}$) using top $10^{th}$ or $11^{th}$ leaf petioles collected between 10 to 11 am in the morning. Under the semiforcing culture, $NO_3{^-}$ content of leaf petiole juice was highest at 60 days after transplanting (DAT) at all fertigation treatments. Appropriate $NO_3{^-}$content of leaf petiole juice was $2,418{\pm}78{\sim}2,668{\pm}118$ at 45 DAT, $3,032{\pm}90{\sim}3,332{\pm}63$ at 60 DAT, $2,709{\pm}50{\sim}3,158{\pm}155$ at 75 DAT, $2,535{\pm}49{\sim}2,907{\pm}83$ at 90 DAT, and $2,242{\pm}48mg\;L^{-1}$ at 105 DAT. In addition, appropriate $NO_3{^-}$ content of soil solution was $167{\pm}9{\sim}212{\pm}15$ at 45 DAT, $83{\pm}10{\sim}112{\pm}12$ at 60 DAT, $49{\pm}3{\sim}92{\pm}6$ at 75 DAT, $71{\pm}9{\sim}103{\pm}9$ at 90 DAT, and $73{\pm}9mg\;L^{-1}$ at 105 DAT. The cucumber yield at 100% N level of fertigation was $7,770kg\;10a^{-1}$ and no difference in yield was found at 200% N level of fertigation. However, there was 12% decrease in yield at 50% N fertigation and, 17% decrease at 0% N fertigation. Under retarding culture, $NO_3{^-}$ concentration of leaf petiole juice was highest at 55 days after transplanting (DAT) at all fertigation treatments. Appropriate $NO_3{^-}$ content of leaf petiole juice was $2,464{\pm}102{\sim}2,651{\pm}33$ at 45 DAT, $3,025{\pm}71{\sim}3,314{\pm}84$ at 55 DAT and $2,488{\pm}92mg\;L^{-1}$ at 65 DAT, respectively. Appropriate $NO_3{^-}$ content of soil solution was $111{\pm}10{\sim}155{\pm}14$ at 45 DAT, $93{\pm}7{\sim}147{\pm}14$ at 55 DAT, $67{\pm}4mg\;L^{-1}$at 65 DAT, respectively. The cucumber yield at 50% N fertigation was not different from $1,697kg\;10a^{-1}$ of 100% N fertigation level and even with that of the 200% N fertigation. However, there was 21% decrease in yield at 0% N fertigation.

• Asian Journal of Turfgrass Science
• /
• v.23 no.1
• /
• pp.111-122
• /
• 2009

Compound fertilizer contained slow release nitrogen was used at golf course management because of promoting turfgrass growth and decreasing fertilizing labor. But, it was hardly published about turf grass growth by its effect and form like isobutylidene diurea(IBDU) and methylene urea(MU) in golf course management of Korea. This study was conducted to investigate the effect of compound fertilizer contained slow release nitrogen such as IBDU and MU on creeping bentgrasss and the change in nitrogen in the root zone after application of fertilizers at AM turfgrass research institute with soil analysis, chlorophyll content index, leaf area index and dry weight during 5 months from July to december in 2007 year. Fertilizer treatments were designed as following; non-fertilizer(NF), straight fertilizer(CF), treatment 1(MU), treatment 2(IBDU 1), and treatment 3(IBDU 2). The every treatments were arranged a randomized complete block design with three replications. Results obtained were summarized as follows: As relative to time after N fertilizers application, ammonium and nitrate in soil were increased, but T-N was decrease. $NO_3$-N and T-N content of slow release fertilizer(SRF), the treatment MU, IBDU 1 and IBDU 2, in soil was higher than that of CF, and the change of ratio of available N and T-N by elapsed time after fertilizing SRFs and CF was higher about 5% in root zone of SF to l5days, but in root zone of SRF from 30days about $5{\sim}10%$. Compared with NF, the turf color index was increased 6.5%, 6.7%, 5.9% and 5.5%, respectively, the chlorophyll content 33.2%, 38.4%, 35.1% and 37.1%, the dry weight 76.2%, 77.7%, 69.5 and 72.3% and shoot number 28%, 52%, 56% and 51%. The chlorophyll content index of MD, IBDU 1 and IBDU 2 was increased $2.6{\sim}5.2%$ than that of CF, shoot number $18{\sim}22%$ but turf color index and dry weight was analogous to that of CF. These results showed that the SRF application was supplied nitrogen for a long time in root zone by increasing an available nitrogen, and so bring turf growth such as chlorophyll content and shoot number in creeping bentgrass.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.2
• /
• pp.214-219
• /
• 2008

An experiment was conducted to evaluate the effects of nitrogen (N) level on the dry matter (DM) yield, N concentration and oxalate content of some tropical grasses, namely Rhodesgrass (Chloris gayana), Guineagrass (Panicum maximum) and Sudangrass (Sorghum vulgare). Three levels of N as urea were applied (Standard- 260, $Standard{\times}2$- 540 and$Standard{\times}4$- 1,060 kg N/ha for Rhodesgrass; Standard- 380, $Standard{\times}2$- 770 and $Standard{\times}4$- 1,570 kg N/ha for Guineagrass and Sudangrass) in a completely randomized design and grasses were harvested twice at approximately two-month intervals. Dry matter yield tended to be higher with increased rate of N fertilizer in all species, while further additional N ($Standard{\times}2$ or $Standard{\times}4$) did not significantly (p>0.05) further increase DM yield, when compared with the Standard level of N fertilizer application. There was also a trend towards higher N concentration in plants as N fertilization increased in all species and it was increased significantly in Rhodesgrass and Sudangrass (p<0.05 or p<0.01, respectively). Further additional N ($Standard{\times}2$ or $Standard{\times}4$) application showed no significant (p>0.05) differences on oxalate content in plant tissue within species, when compared with the Standard level of N. The Rhodesgrass contained 0.11, 0.13 and 0.15% soluble oxalate and 0.23, 0.25 and 0.27% total oxalate with Standard, $Standard{\times}2$ and $Standard{\times}4$ level of N application, respectively. The Guineagrass contained 0.54, 0.50 and 0.42% soluble oxalate and 1.60, 1.56 and 1.45% total oxalate with Standard, $Standard{\times}2$ and $Standard{\times}4$ level of N application, respectively. The Sudangrass contained 0.06, 0.15 and 0.12% soluble oxalate and 0.22, 0.22 and 0.21% total oxalate with Standard, $Standard{\times}2$ and $Standard{\times}4$ level of N application, respectively The results from this study suggest that these grasses do not use further addition of N fertilizer ($Standard{\times}2$ or $Standard{\times}4$) to form high content of oxalate salts, when compared with the Standard level of N. In addition, the levels of oxalate present with these grasses are quite low as far as toxicity to animals is concerned.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.3
• /
• pp.242-252
• /
• 1984

A port experiment was conducted to compare the effect of chemical forms of nitrogen fertilizers on the rice growth and soil characteristics. The nitrogen fertilizers used for this study were ammonium sulfate, ammonium nitrate, ammonium chloride and urea. The results are summarized as follows. 1. The differences in pH of the soil and surface water between treatments during the first week after fertilizer application were great and the pH values were in the order of urea > ammonium nitrate > ammonium sulfate > ammonium chloride treatment. However the differences were insignificant after the first week. 2. The differences in pH of the air-dried soil somewhat increased and pH values were in the order of urea > ammonium nitrate > ammonium chloride > ammonium sulfate treatment. 3. Sulfur contents of the soil and the rice leaf and N content of the rice leaf were highest when ammonium sulfate was applied. But there were few differences between the treatments in total N content of the soil and in P, K, Ca and Mg contents of the soil and the rice leaf. 4. Number of tillers and dry matter weight of the rice plant were highest in ammonium sulfate plot throughout all the growing stages. 5. Number of panicle per hill was highest in ammonium sulfate plot, and this brought the highest grain yield in ammonium sulfate plot. The lowest grain yield in ammonium nitrate plot resulted from the lowest number of panicle per hill and ripened grain ratio.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.2
• /
• pp.131-155
• /
• 1983

Though it has been widely known the nitrogen effects are influenced by soils, varieties, and mineral nutrients in the rice culture, few analyses in relation to the factors increasing nitrogen effect have been studied in Korea. The effects of potassium and silica on the factors increasing nitrogen effects in paddy soils were investigated in accordance with soil improvement practices and nitrogen application methods for the cultivated varieties. The results obtained are as follows. 1. For 413 paddy fields, the yield from soils without nitrogen application ranged from 200 to 850kg/10a and that from nitrogen application did 350 to 1,051kg/10a. The yield increament by nitrogen application varied 50 to 650kg/10a depending on soils. 2. Soil chemical characteristics for high yield were different between with nitrogen and without nitrogen application. In the without nitrogen application, however, contents of organic matter, phosphorous, potassium and calcium of high yield soils were lower than those of low yield, while the available silica content was higher in the former. 3. The yield increased with nitrogen application up to 22.4kg/10a and thereafter it decreased. These phenomena were supposed to be not be decrease of nitrogen uptake but by lowered silica uptake. 4. Clay soil incorporation, deep plough, and inorganic constituents control such as Ca, Mg, and $Sio_2$ were effective as soil improvement praitices. It was appeared that increases of silica content and Ca/Mg ratio were important to increase nitrogen effects. 5. For the correlation between yield and yield components, it was high between yield and panicle in low nitrogen level and so was it between grain yield and ripening rate in high nitrogen. 6. In the urea and super granule urea application plot, recovery rate of nitrogen by plant and soil was high and yield was remarkable high. 7. Regardless of fertilizer types such as ammonium sulfate and urea, the residual nitrogen was about 4kg/10a in both plots of 5.8 and 11.6kg/10a. N applied. 8. The potassium application to soil enhanced the nitrogen efficiency. It was more effective in low potassium soil. 9. Optimum pH value for gel formation in the 4% sodium silicate solution was approximately 6.6. 10. It was suggested that silica could affect to rice plant growth as the inorganic and organic chemical components.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.126-138
• /
• 2017

This study was conducted to investigate the potential of chicken feather (CF), which is a by-product in poultry industry, as a raw material of wood adhesives. For the purpose, adhesive resins were formulated with NaOH- and $H_2SO_4$-hydrolyzed CF as well as crosslinkers, and then the properties and water resistance of the adhesive resins against hot water were measured. CF was made of mainly keratin-type protein, and no or very low content of heavy metals was detected. Hydrolysis rate of CF increased as NaOH concentration in hydrolysis solutions increased. However, in order to minimize the loss of adhesive property of protein itself by the severe hydrolysis of CF and to seek its proper hydrolysis conditions, NaOH concentrations in hydrolysis solution determined to adjust to 5%, 7.5% and 10%. In the NaOH-hydrolyzed CF, $H_2SO_4$-hydrolyzed CF as a hardener and crosslinker were added to formulate CF-based adhesive resins. Solid content of the resins ranged from 28.3% to 44.8% depending on hydrolysis conditions and type of crosslinker. Viscosity of the resins at $25^{\circ}C$ was very high. However, when the temperature of the resins was increased to $50^{\circ}C$, the viscosity decreased greatly and thus the resins could be applied as a sprayable resin. Retention rate measured to evaluate the water resistance of adhesive resins was the highest in the cured resin formulated with 5% NaOH-hydrolyzed CF and 5% $H_2SO_4$-hydrolyzed CF of 10% based on the solid weight as a hardener. Retention rate depending on crosslinkers added into adhesive resins was the highest phenol-formaldehyde (PF) followed by melamine-urea-formaldehyde (MUF) and formalin. The retention rate of CF-based adhesives formulated with 5% NaOH-hydrolyzed CF, PF and $H_2SO_4$-hydrolyzed CF of 10% and over did not differ statistically from that of commercial MUF resins. All of CF-based adhesives formulated with PF as a crosslinker and one with 5% NaOH-hydrolyzed CF of 55%, 5% $H_2SO_4$-hydrolyzed CF of 15%, and MUF of 30% on the basis of solid weight could be substituted for commercial urea-formaldehyde resins, From the results, CF can be used as a raw material of wood adhesives if hydrolyzed in proper conditions.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.4
• /
• pp.260-266
• /
• 2008

Small lysimeter experiment under rain shelter plastic film house was conducted to investigate the effect of soil characteristics on the leaching and soil solution concentration of nitrate and phosphate. Three soils were obtained from different agricultural sites of Korea: Soil A (mesic family of Typic Dystrudepts), Soil B (mixed, mesic family of Typic Udifluvents), and Soil C (artificially disturbed soils under greenhouse). Organic-C contents were in the order of Soil C ($32.4g\;kg^{-1}$) > Soil B ($15.0g\;kg^{-1}$) > Soil A ($8.1g\;kg^{-1}$). Inorganic-N concentration also differed significantly among soils, decreasing in the order of Soil B > Soil C > Soil A. Degree of P saturation (DPS) of Soil C was 178%, about three and fifteen times of Soil B (38%) and Soil A (6%). Prior to treatment, soils in lysimeters (dia. 300 mm, soil length 450 mm) were tabilized by repeated drying and wetting procedures for two weeks. After urea at $150kg\;N\;ha^{-1}$ and $KH_2PO_4$ at $100kg\;P_2O_5\;ha^{-1}$ were applied on the surface of each soil, total volume of irrigation was 213 mm at seven occasions for 65 days. At 13, 25, 35, 37, and 65 days after treatment, soil solution was sampled using rhizosampler at 10, 20, and 30 cm depth and leachate was sampled by free drain out of lysimeter. The volume of leachate was the highest in Soil C, and followed by the order of Soils A and B, whereas the amount of leached nitrate had a reverse trend, i.e. Soil B > Soil A > Soil C. Soil A and B had a significant increase of the nitrate concentration of soil solution at depth of 10 cm after urea-N treatment, but Soil C did not. High nitrate mobility of Soil B, compared to other soils, is presumably due to relatively high clay content, which could induce high extraction of nitrate of soil matrix by anion exclusion effect and slow rate of water flow. Contrary to Soil B, high organic matter content of Soil C could be responsible for its low mobility of nitrate, inducing preferential flow by water-repellency and rapid immobilization of nitrate by a microbial community. Leached phosphate was detected in Soil C only, and continuously increased with increasing amount of leachate. The phosphate concentration of soil solution in Soil B was much lower than in Soil C, and Soil A was below detection limit ($0.01mg\;L^{-1}$), overall similar to the order of degree of P saturation of soils. Phosphate mobility, therefore, could be largely influenced by degree of P saturation of soils but connect with apparent leaching loss only more than any threshold of P accumulation.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.5
• /
• pp.249-252
• /
• 2014

The aim of this work is to investigate the effect of $Ca_xSr_{2-x}$ and activator on the structural and luminescent properties of green-emitting $Ca_xSr_{2-x}SiO_4:Eu^{2+}$ nano phosphor. Using urea as fuel and ammonium nitrate as oxidizer, $Ca_xSr_{2-x}SiO_4:Eu^{2+}$ has been successfully synthesized, using a combustion method. The particles were found to be small, spherical and of round surface. SEM imagery showed that the phosphors particles are of nanosize. The $Ca_xSr_{2-x}SiO_4:Eu^{2+}$ emission spectrum for 360 nm excitation showed a single band, with a peak at 490 nm, which is a green emission. The highest luminous intensity was at $1,000^{\circ}C$, which was obtained when the $Eu^{2+}$ content (y) was 0.05. The results support the application of $Ca_xSr_{2-x}SiO_4:Eu^{2+}$ phosphor as a fluorescent material for ultraviolet light-emitting diodes (UV-LEDs). Characteristics of the synthesized $Ca_xSr_{2-x}SiO_4:Eu^{2+}$ phosphor were investigated by means of X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and photoluminescence (PL) detection.

• Geomechanics and Engineering
• /
• v.12 no.5
• /
• pp.803-813
• /
• 2017

This study discussed the possible optimization of enzyme-mediated calcite precipitation (EMCP) as a soil-improvement technique. Magnesium chloride was added to the injection solution to delay the reaction rate and to improve the homogenous distribution of precipitated minerals within soil sample. Soil specimens were prepared in 1-m PVC cylinders and treated with the obtained solutions composed of urease, urea, calcium, and magnesium chloride, and the mineral distribution within the sand specimens was examined. The effects of the precipitated minerals on the mechanical and hydraulic properties were evaluated by unconfined compressive strength (UCS) and permeability tests, respectively. The addition of magnesium was found to be effective in delaying the reaction rate by more than one hour. The uniform distribution of the precipitated minerals within a 1-m sand column was obtained when 0.1 mol/L and 0.4 mol/L of magnesium and calcium, respectively, were injected. The strength increased gradually as the mineral content was further increased. The permeability test results showed that the hydraulic conductivity was approximately constant in the presence of a 6% mineral mass. Thus, it was revealed that it is possible to control the strength of treated sand by adjusting the amount of precipitated minerals.