• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.7
• /
• pp.957-965
• /
• 2005

The effect of ammoniation with urea and with soybean meal (SBM) as a source of urease on the nutritive value of wheat straw was evaluated in sheep. Twenty-four male Najdi lambs were used in a 3${\times}$2 factorial design, in which the animals were allocated to three straw treatments: 0% urea-treated (NT), 6% urea-treated (UT) and 2.2% urea-supplemented (US) straws. Each straw treatment was either supplemented or non-supplemented with 70 g SBM $kg^{-1}$ straw during the treatment time with urea, giving a total of six straw treatments. Each of these treatments was individually fed ad libitum to 4 lambs, together with 300 g of barley grain/head/day. Total N content of UT and US straws increased significantly (p<0.001) as compared to NT straw. The degree of urea hydrolysis, either with or without SBM addition, was nearly similar. Lambs fed either UT or US straw based diets had significantly (p<0.01) and numerically (p>0.05) higher straw DM intake (g $d^{-1}$ $kg^{-1}$ $BW^{0.75}$), compared to those fed NT straw based diet. Apparent DM or OM digestibilities increased significantly (p = 0.014) in lambs fed UT diet, and numerically (p>0.05) in lambs fed US diet as compared to those fed NT diet. Fiber (CF, NDF, ADF, cellulose and hemicellulose) digestibility increased to a similar magnitude, averaging 20.2 (p<0.001) and 7.8% (p<0.07); this corresponds to 35 (p<0.001) and 51% (p<0.001) in N digestibility and approximately 78 (p<0.017) and 105% (p<0.002) in N retention, for UT and US diets, respectively, as compared to NT diet. However, the UT diet had higher (p<0.01) fiber digestibility over the US diet. Addition of SBM tended to improve (p = 0.09) straw DM and digestible OM intakes, while significantly increasing (p<0.001) total and digestible CP intakes across all diets. Lambs fed on US diet had higher ruminal ammonia N than those fed on UT (p<0.05) or NT (p<0.001) diets. However, ruminal pH and molar proportion of the volatile fatty acids did not differ (p>0.05) among the treatment diets. This study suggests that US and UT treatments, particularly the latter, improved straw intake, digestibility and N utilization by lambs compared to NT treatment. On the other hand, addition of SBM as a source of urease had a negligible effect on urea hydrolysis.

• Journal of Korean Society of Forest Science
• /
• v.60 no.1
• /
• pp.51-57
• /
• 1983

Properties and glue shear strength of each water soluble rues-phenol copolymer adhesive and phenolic resin adhesive were examined as a high temperature curing binder through the manufacture of plywood made of Kapur veneer. The former has different molar ratio and the latter was made from different catalyst method. The results are summarized as follows: 1) Specific gravities of air dried plywood manufactured from each adhesive ranged from 0.67 to 0.82 and their moisture contents met the K.S. standard 2) In dry and wet shear strength, adhesives with 60 percent of non volatile content showed higher values than those with 50 percent except phenolic resin. Urea-phenol copolymer resin with 20 percent of phenol content exhibited the highest, and that with 70 percent the lowest. Filling effect of wood flour on the bonding strength is great in urea-phenol copolymer resin with more than 50 percent of phenol content, especially significant in 50 percent of non volatile content including alkali catalyst phenolic resin. Alkali and acid catalyst methods were the highest among the adhesive manufacture methods. In wet strength, urea resin belongs to the lowest group. 3) In glue shear strength after boiling and drying test, no method for manufacturing phenolic formaldehyde resin adhesive was stronger than alkali and acid catalyst methods. Phenolic resin made from alkali catalyst method needs a wood flour filler to improve the bonding quality. Urea-phenol copolymer resin with 10 percent of phenol content showed the reasonable water resistance.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.1
• /
• pp.50-54
• /
• 1991

This study was conducted to evaluate the effect of five newly developed slow-release compound fertilizer varying urea/formaldehyde mole ratios on chinese cabbage against the checked plot of straight fertilizer. The chinese cabbage was obtained the highest yield in the product V which was 1.0 mole ratio of urea/formaldehyde adding with 6.7% urea resin, however, it was lowest in the product VII which the lowest mole ratio of urea/formaldehyde and the highest amount of the resin added. The appropriate product with one basal application for chinese cabbage should be one with 76.1 % of T-N dissolution in water after 24hrs and 71.7 % of T-N dissolution in soil 100 days after treatment. The total nitrogen content of the harvest plant in the product plot was lower compared to the checked plot of N P K and the available soil phosphrous after harvest was higher than that of the checked.

• Journal of Forest and Environmental Science
• /
• v.36 no.3
• /
• pp.219-224
• /
• 2020

Urea formaldehyde resins are widely used in the manufacturing of wood composite and their usage is always combined with release of formaldehyde characterized to be hazardous to health during and after the manufacturing of the products. This study investigates the effectiveness of wood-based adhesive from oil of pyrolysed Triplochiton scleroxylon sawdust for the production of composite board. The wood-derived Pyrolytic Oil (PyO) was blended with Urea Formaldehyde (UF) resin to formed Pyrolytic Oil-Urea Formaldehyde (PyOUF). The obtained PyOUF called Wood-Based Adhesives at four blends and control (UF) viz; 1:1, 1:2, 1:3, 2:1, 1:3 were further employed to prepare the composite board and test for their bonding strength by physical (water absorption-WA and thickness swelling-Th.S) and mechanical properties (modulus of elasticity-MOE, modulus of rupture-MOR, and impact bending-IB). Data obtained was analysed using analysis of variance at α 0.05. The result of analysis of variance conducted on physical properties show significant difference (p≤0.05) between the WA values obtained when testing the different blending proportion of PyOUF and likewise between 2 and 24 h of immersion. PyOUF had significant effect (p≤0.05) on Th. S for 24 h but no significant different (p>0.05) for the 2 h period of soaking. The analysis of variance on mechanical properties of the composite board (MOE, MOR, and IB) show significance differences (p≤0.05) between the strength values obtained when testing the different ratios of PyO with UF. PyO content influenced the properties of the boards and it is evident that PyO can be used in the manufacture of composite board.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.4
• /
• pp.479-484
• /
• 2004

The study was conducted to assess the effect of milk production, parity, stage of lactation, season and individual milk components themselves on milk urea nitrogen (MUN) concentration and other milk components of 3,219 Holstein dairy cows in Korean dairy farms. The MUN concentrations in Korean dairy cows were estimated to 16.68$\pm$5.87 mg/dl. Milk yield was negatively correlated with fat and protein contents and somatic cell counts (SCC) in milk (p<0.01). The increasing MUN concentration has positive correlation with yield and fat content. By increasing somatic cell, milk yield was reduced and MUN level was increased. Cows in spring and winter produced more milk over 1.43 and 0.93 kg/day, respectively, than cows in summer (p<0.01). Milk urea nitrogen concentrations of milk produced in summer and fall were significantly lower (p<0.01) than those in spring and winter. Both MUN concentration and somatic cell counts were highest in winter. Milk yield was lower (p<0.01) in the first calving than other calving time and was tended to increase until the fifth parity and then decrease. Milk urea nitrogen and SCC were not related to parity of cows in this study. Milk yield and SCC were positively related to lactation period while MUN concentrations and milk fat and protein contents were negatively influenced by stage of lactation. In the present study, the relationship between MUN and reproduction of dairy cows was also investigated. Cow produced milk in high MUN concentrations (greater than 18 mg/dl) had more open days than cows in MUN concentrations less than 18 mg/dl. However, no significant difference between MUN concentration levels and frequency of artificial insemination was found in this study. It is suggested that although MUN values for nutritional management and measures of production or reproduction are used, non-nutritional factors should be considered.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.1
• /
• pp.21-24
• /
• 1986

This experiment was conducted to find out the feasibility of foliar application of mixed solution of urea and agricultural chemicals. One to two percent urea solution and chemicals were combined for joint application and the degradation of mixed solution was tested and its phytotoxicity was evaluated on rice plant. There were no changes of pH and components of mixed solution of urea and chemicals. However, it led to phytotoxicity in rice plant and more severe in higher urea content. The yields of rice were slightly lower in the mixed solution plot than in check one, however, no significant statistical difference was observed. Due to phytotoxicity, the foliar application of mixed solution is not agronomically sound.

• Journal of Adhesion and Interface
• /
• v.12 no.2
• /
• pp.73-80
• /
• 2011

In order to develop the environmental-friendly new materials based on soybean protein which is plantable macromolecule, thermal characteristics of the soybean protein resin (SPI) modified by plasticizers (1,3-propandiol, glycerol) and cross linking agents (glutaraldehyde, epichlorohydrin, glyoxal, urea) were analyzed by TGA. Mechanical properties of modified SPI were investigated and fracture was observed by SEM. As the result, flexibility of SPI film was increased by adding plasticizers; 1,3-propandiol and glycerol. Plasticization effect of glycerol was relatively greater than that of 1,3-propandiol. With the application of crosslinking agents (glycerol, epichlorohydrin and glyoxal), strength and thermal stability of SPI increased with their content. On the other hand, in case of addition of urea, thermal stability of SPI decreased and its strength was reduced because cross-linking between urea and SPI was somewhat difficult. Fracture surfaces and domain interfaces of the modified SPI resins were observed with SEM.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.5
• /
• pp.755-762
• /
• 2018

Objective: The objective of the study was to determine the influence of varying fibrous diets on fecal characteristics of growing pigs. Methods: A total of 104 pigs (initial weight $18{\pm}2.0kg$) were used in the study. They were housed in individual pens and fed on diets containing maize cob, grass hay, lucerne hay, maize stover, and sunflower husk. These fibers were included at 0, 80, 160, 240, 320 and 400 g/kg. Fecal and urine samples were collected. Results: Fecal output was largest amongst pigs fed on diets containing grass hay and maize stover (p<0.05). Nitrogen content was highest in feces from pigs fed on sunflower husk (p<0.05). Pigs fed on diets containing maize stover and maize cobs produced the largest concentrations of short chain fatty acids. Acetate concentration was high in feces of pigs fed maize stover than those fed grass hay and lucerne hay (p<0.05). As the level of fiber inclusion increased, fecal consistency and nitrogen content increased linearly (p<0.05). Urea nitrogen decreased as the inclusion level increased across all the fibers (p<0.05), with maize cobs containing the largest content of urea nitrogen. As dietary fiber content increased, fecal nitrogen content also increased (p<0.05). Conclusion: It was concluded that different fiber sources influence fecal characteristics, thereby having different implications on pig waste management. It is vital to monitor fiber inclusion thresholds so as to easily manage environmental pollutants such as butyrate that contribute to odors.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.5
• /
• pp.42-48
• /
• 2008

This study was conducted to discuss the effects of hardener and extender contents on peak temperature, reaction enthalpy (${\Delta}H$), gelation time, viscosity change, and pH value in three types of UMF (urea-melamine- formaldehyde) resin with the help of perpHecT LogR meter, differential scanning calorimetry (DSC), and advanced rheometric expansion system (ARES), The results indicated that the pH value of Control A steeply decreased to 5,2 in the early stage but relatively remained constant thereafter as in Synthesis 1 and Synthesis 2, The peak temperature and time decreased as well, whereas ${\Delta}H$ and viscosity increased with the increase of hardener content. On the other hand, ${\Delta}H$ was not changed up to the extender content of 5% and then decreased with its further addition, And the pH value and peak temperature showed no change with the increase of extender content at the hardener content of 5% in three types of UMF resin, The effect of hardener content in this experiment, however, appeared more conspicuous in Control A than in the other two types of Synthesis 1 and Synthesis 2, These results might be caused by higher molecular weight with longer chains of methylene ($-CH_2-$) and methylene ($-CH_2-O-CH_2-$) ether bridges or much more branched chains in Control A.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.7
• /
• pp.970-973
• /
• 2001

An experiment was carried out to assess the effect of feeding concentrate mixtures varying in bypass protein levels with urea-treated or untreated grass on the performance of twelve Red Kandhari calves (14 months of age and 78.15 kg body weight) for a period of 75 days. Dry grass was treated with 4 percent urea solution and ensiled for 30 days. The CP ($N{\times}6.25$) content in urea treated grass increased from 3.96 to 8.89 percent. Two iso-caloric and iso-nitrogenous concentrate mixtures (CM-I and CM-II) varying in RDP to UDP ratio viz., 65:35 and 55.45 were prepared. The calves in control group ($T_1$) were fed concentrate mixture-I with ad libitum untreated dry grass and those in experimental group ($T_2$) were fed concentrate mixture-II with ad libitum urea treated dry grass. The dry matter consumption in group $T_2$ was significantly (p<0.01) higher as compared to group $T_1$. The total DMI in $T_1$ and $T_2$ was 146.92 and 166.95 kg respectively, whereas the DMI per day and per 100 kg body weight was 1.94 and 2.22 and 1.90 and 2.35 kg, respectively. The average total gain in body weight (kg) and average daily gain (g) of calves in $T_2$ was significantly (p<0.01) higher as compared to those in $T_1$ the values being 28.66, 18.33 and 382.16, 244.44, respectively. Feed efficiency in terms of kg DM per kg gain in body weight was significantly (p<0.01) lower in group $T_1$ than in $T_2$. The cost of feed per kg gain in body weight for $T_2$ and $T_1$ group was Rs. 21.14, 28.22, respectively. The digestibility coefficients of DM, CP, EE, CF, NFE, NDF and ADF were 59.60, 57.50, 53.00, 65.04, 45.82, 48.48, 52.48 and 55.73 for $T_1$ group. The coressponding values were 68.78, 67.80, 59.83, 71.41, 49.93, 53.37 and 57.81, respectively for $T_2$ group. The digestibility coefficients for all the proximate principles in $T_2$ were significantly (p<0.01) higher as compared to $T_1$. However, NDF and ADF digestibilities were not significantly different. Nutritive value determined in terms of DCP and TDN for The experimental ration was significantly (p<0.01) higher than control ration, the values being 7.32 and 47.34 and 9.39 and 52.40% respectively. The blood urea nitrogen levels at 0, 3 and 6 h interval after feeding were significantly (p<0.01) lower in calves fed experiment ration as compared to control. The overall results indicated that in Red Kandhari calves an optimum growth can be economically achieved by feeding 4 percent urea treated dry and mature grass as basal roughage supplemented with a concentrate mixture containing 20 percent CP, 70% TDN and 45% UDP/bypass protein.