• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.702-709
• /
• 2018

A quick-hardened concrete track was developed to improve the aged ballasted track to a concrete track, and applied to earthworks and tunnels of main and urban railways. Rebars for reinforcement are not generally applied to prestressed concrete sleepers. On the other hand, many cracked sleepers have been observed in railroad sites. A wide sleeper, which is one of the main components of quick-hardened concrete track, should be structurally safe and crack-resistant in a ballasted and concrete track to avoid this problem. In particular, a wide sleeper manufactured by a post-tension method must have reinforcing bars applied to the rail-seat section. In this paper, static tests, dynamic tests, and fatigue tests were carried out to compare the flexural strength and crack resistance performance of a wide sleeper with and without reinforcing bars for a quick-hardened concrete track. As a result of the test, if some reinforcing bars are applied appropriately to the rail-seat section of a wide sleeper, it will be possible to prevent the occurrence of cracks, delay the expansion of the crack width, and the flexural fracture.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.15-25
• /
• 2005

Using a stochastic cost frontier approach(SCFA), this paper annually estimates the efficiency and productivity with same data in the papers which analyze the efficiency and productivity using data envelopment analysis(DEA) to compare the results and suggest the political findings of raising the efficiency and productivity for three publicly-owned rail transit properties. the Seoul Subway Corporation (SSC), the Seoul Metropolitan Electrified Railways Sector of Korea National Railroad (SMESRS) and the Busan Urban Transit Authority (BUTA). The results show that the results of SCFA are higher than DEA for efficiency and lower for productivity in that DEA regards the stochastic error and measurement error as the inefficiency contrary to SFCA. But the political findings from these results appears to be similar as follows. First, the productivity of the three properties should be first improved by using existing technologies efficiently and then by introducing new ones. Second, the three properties should improve the technical efficiency through reducing input quantities to raise their efficiency. Finally, all the three components of the productivity such as productive efficiency change, technical change, and scale change should be considered to evaluate their productivity more correctly.

• Journal of the Korean Society for Railway
• /
• v.14 no.3
• /
• pp.262-270
• /
• 2011

Track support stiffness which affected track maintenance and riding comfort had a big effect on the track and train. Also, track support stiffness of the track design which was based on theory differs from track support stiffness of the track generated on the field. Track support stiffness was generated by several factors such as dynamic wheel loads, vertical displacement of track, and stress at rail bottom on the field test. With the results of the field test was compared with theoretical value. This paper analyzed that track support stiffness of ballast depended on condition of ballast, and support stiffness of concrete track also depended on the characteristic of track structures such as, normal elastic fastening system, rail floating system and sleeper floating system. However, on the ballast and concrete track, the designed track support stiffness was underestimated less than the measured track support stiffness. When the track condition was estimated on service line, it would not consider the track condition on the field. Therefore, this study proposed the various track type and the range of track support stiffness based on the experimental test.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.165-172
• /
• 2017

High frequency squeal noise can be generated when a railroad vehicle runs a sharp curved section; this noise causes environmental complaints and excessive wear on the wheel and the railroad track. In this paper, curved squeal noise experiments on a commercial railway were carried out to investigate this phenomenon. The relationship of the squeal noise pressure level, the frequency characteristics, the railway running speed, and the modal behavior of the wheel were investigated. At the same time, the lateral motion of the wheel relative to the rail was captured using a video camera; wheel movement was calculated when the noise was generated. queal noise occurred at the highest level at the inner front wheel; this phenomena is considered to be related to the lateral vibration response characteristics of the wheel. It can be seen that the magnitude of this squeal noise is not directly related to the increase in vehicle speed.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.669-675
• /
• 2020

In this study, 3D analysis was compared in evaluating the track deformation of subway structures during adjacent excavation. For the 3D analysis model, the boundary conditions of the tunnel model and the application level of the ground water were analyzed as variables. As the result of the effects of track irregularity using the 3D model, the analysis model considering the site ground water level instead of the design values and changing the constraint of the boundary condition is more reasonable. In addition, the influence of track irregularity due to the boundary condition and load condition of the analytical model is more obvious in the factors directly affected by the longitudinal relative displacement of the rail, such as alignment, cross level and gauge irregularity. Therefore, the evaluation on track stability according to adjacent excavation work was appropriate to analysed the longitudinal deformation of the track by using 3D model that could be investigate the deformation of rail. In addition, the boundary condition and load condition(ground water level) of the numerical model was important for accurate analysis results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3499-3510
• /
• 2015

To cope with the increased demand on the intra-city transportation by urban rails, the introduction of the light rail transit (LRT) systems has been expedited in Korea due to the possible reduction of both the development and operation costs from adopting LRT systems. The LRT systems have so far been designed, constructed and operated based on the corresponding law and regulations. It has been conceived that fully complying with the existing guidelines may incur some extra costs on LRT. In addition, the present design of LRT stations seems to require unnecessarily long flow of passengers traffic, particularly for disabled people. In this paper, as an approach to solving the aforementioned issues, an introduction of 'LRT stops' has been studied where the stops are similar in concept to bus stops and are intended to replace the stations of a bigger scale in general. Specifically, necessary guidelines for design have been developed by modifying the existing ones to be fit with LRT stops. A design case was also presented to evaluate them. The effective use of the results reported here will provide an opportunity of cost reduction in connection with the construction and operation, and also let people benefit from convenient use of rails, thereby resulting in enhanced transportation welfare.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.35-47
• /
• 2004

Using data envelopment analysis, this paper annually estimates Malmquist total factor productivity indices and decomposes them into productive efficiency change, technical change, and scale change components for three publicly-owned rail transit properties: the Seoul Subway Corporation(SSC), the Seoul Metropolitan Electrified Railways Sector of Korea National Railroad (SMESRS) and the Busan Urban Transit Authority (BUTA). The paper then conceptualizes that the property produces a single output(car-kilometers) using four inputs(labor, electricity, car and maintenance, and track) and uses unbalanced panel data consisted of annual observations on SSC, SMESRS and BUTA. The results show that the average annual growth rate of productivity of the three properties is 6.6 percent, which is 0.5 percent less than the average annual increasing rate of their labor price. They also show that the greatest part of the growth in productivity is explained by technical change and to a lesser degree by scale change and changes in productive efficiency though each of the three components contributes more than 20 percent to the growth in productivity, These results suggest that the three properties should base the increasing rate of their wages on the growth rate of their productivity and utilize existing technologies more efficiently prior to introducing new ones to raise their productivity, and that all the three components should be considered to evaluate their productivity more correctly.

• Ecology and Resilient Infrastructure
• /
• v.4 no.2
• /
• pp.83-92
• /
• 2017

Increased investment in environment-friendly transport vehicles has led to rapid transit of railway tracks, double track program, linear improvements in railway lines, and moving railroad routes into the suburbs. They resulted in fast increase of railway yards. However, as the railroad yards being neglected, urban fine sites have been degraded. Local governments kept seeking ways to utilize the railway yards. In addition, Ministry of land, infrastructure and transport enacted "Guidelines for utilization of railway yards". The Guidelines categorized the railway yards into three types; conservation, utilized, and other sites in order to make efficient use of them. The railway yards have been converted and used for parks, rail bike trails, bike paths, and solar projects. It seems that studies are needed on diverse use of the yards and on post evaluation. This study investigated current uses of railway yards, domestic and foreign, and analyzed for the pertinent conditions on natural and cultural landscape, educational value, location and accessibility, potential for recreational area, and development opportunities. In this study, I proposed a quantitative evaluation method, and to find way to diversify the use of railway yards.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.3
• /
• pp.46-55
• /
• 2003

This study aims to evaluate the Ulsan city residents' perception and satisfaction with open spaces and cityscape after consideration in the side of getting primary data for the city open spaces policy and Green Plan for Ulsan city. In this study, low data was gathered by questionnaires survey with stratified random sampling method. Questionnaires were designed by several sets of variables such as behavioral patterns, satisfactions for open spaces and user's demographic variables. Data were analyzed by descriptive statistics, cross-tabulation and regression analysis. The main results of this study can be summarized as follows : 1. In overage the residents were slightly satisfied with park open spaces. There were good and poor park open spaces. in the perceptions of citizens as follows : 'nearby mountain and open spaces', 'rail side green area' were high satisfactory, and 'riverside', 'green qualities' were low in satisfaction. 2. In overage the residents were slightly satisfied with cityscape. There were good and poor cityscape in the perceptions of citizens as follows : 'nearby forest in and open spaces', 'night scape of an urban center' were high satisfactory, and 'streetscape', 'appearances of high-rise buildings' were low in satisfaction. 3. As a results of regression analysis predictable variables for satisfaction with Park and Open spaces were : 'open spaces by the public', 'open spaces by neighbor', 'grande open spaces', 'open spaces of residence'. 4. As a results of regression analysis predictable variables for satisfaction with cityscape were : 'Central Business District(C.B.D) and nearby mountain and open spaces', 'residence and streetscape', 'riverside and park green open spaces'.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.3
• /
• pp.27-39
• /
• 2009

The 1st Incheon Rapid Transit Line opened in October, 1999. However, the current development plans for areas near stations do not involve plans for the both urban planning and transportation together. As the focus on only the aspect of installing a new transportation mode, the developments even make the problems such as reckless development and traffic congestion gets worse. It is required to analyse status of the current land uses and land use plans in the future and consider distribution of functions of the areas near stations and aims of development plans so as to harmonize the functions of each region in view of making balance in the whole city. The aims of developments of areas near stations has to focus on the study follows steps to find and suggest aims and strategies for the revitalization plan for areas near stations with considering the both transportation and land uses together. The plans for the areas near stations of the Incheon 1st Rapid Transit Line are analysed and then the features and rational strategies are derived. The impact is analysed as applying the development strategies derived from the step into the areas near the stations of Incheon 1st Rapid Transit line.