• Journal of Environmental Health Sciences
• /
• v.8 no.1
• /
• pp.67-80
• /
• 1982

In order to evaluate the psychosomatic health status of metal manufacturing industries workers and their working environments, the present study was conducted from March 1, 1981 to the end of September 1981. The data was obtained from the samples of metal manufacturing industries in Kyung-In Area and their 1, 162 employees. In addition, the 803 urban residents including students, office clerks, and general publics were sampled as control groups to compare with factory employees in psychosomatic analysis. The basic tool employed in the present study was the Todai Health Index (THI) which modified CMI and was developed by Tokyo University Research Team of Japan. The results of the present study were summarized as follows: 1. Working environments of the factories 1) The data shows that fabrication shop produced the highest noise level ranging from 91 to 96 dB (A) and iron and steel shop had the lowest noise level ranging from 81 to 86 dB (A). 2) Dust concentration was the highest in iron foundry shop ($3.8 mg/m^3$) and the lowest in fabrication shop ($1.2 mg/m^3$). 3) WBGT above threshold limit values (T.L.V.) was noted in steel shop (38$\circ$C) and iron foundry shop (34$\circ$C) 4) The concentration of Sulfur dioxide ($SO_2$)was 30.5ppm at steel shop and 12.0ppm at iron foundry shop. 5) The concentration of carbon monoxide (CO) was 140.0ppm at steel shop and 110.5ppm at iron foundry shop. 6) The atmospheric lead concentration was $0.49 mg/m^3$ at soldering shop. 2. The responses of psychosomatic complaints were much higher in steel shops group than in other manu-facturing group, except the response of aggressiveness. 3. The responses of psychosomatic complaints were much higher in industrial workers than in urban residents, except the responses of depression and aggressiveness (p < 0.01 ). 4. The psychosomatic symptoms which industrial workers and urban residents complained frequently were nervousness. agressiveness and lie scale in order. 5. The responses of psychosomatic complaints by sex were much higher in female group than in male group, except the response of aggressiveness. 6. The responses of psychosomatic complaints by age were that both the female and male group showed an increasing tendency in the all items, except the response of depression as age was increasing. 7. The responses of psychosomatic complaints by the length of services were that both the female and male group showed a tendency of increasing in physical symptoms as work years increased. 8. The responses of psychosomatic complaints were higher in unmarried group in the score of nervousness, aggressiveness, mental irritability and irregular life.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.2
• /
• pp.21-30
• /
• 2021

The existing construction industry is classified into industries with low productivity compared to other industries. In order to solve the decline in productivity in the construction industry, the world is focusing on off-site construction (OSC), which is about 40% more productive than existing construction methods. This high productivity is possible because the three stages of production, transport to the site, and site assembly are consistently maintained in a continuous flow. This study conducted a functional survey through literature review, preliminary field survey, questionnaire, and expert interview. The surveyed function were classified into five categories: convenience, flexibility, manageability, communication, and safety, and the functional characteristics of flexibility, manageability, and communication were high. Because of the change according to the construction progress, the production schedule of the factory, and the variety of transportation time required. Finally, A functional block diagram was developed based on the 15 functions corresponding with an average score of 4 or more in the surveyed function score result. If the OSC transport system is established through this study, It can contribute to a successful construction OSC project and increase productivity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.536-543
• /
• 2015

This study describes on the level of back pain knowledge from a survey that conducted from November 1, 2013 to January 31, 2014 for 82 cement factory workers at C region in Chung-Buk. The survey results showed that 56.1% of workers experienced back pain. Also the number of back pain of workers increased when workers who subjected more stresses from their works, had been growth in urban area and have not satisfied their given works. The survey also show that workers who subjected back pain once, usually they stopped smoking and reduced drinking, and they willing to take education for back pain-reducing. The worker's level of back pain knowledge was relatively low scores as 56.29 points in the 100-point conversion score, specially back pain associated with the posture were the lowest point of 50 points. Knowledge of back pain, a positive correlation was observed. Finally workers experienced back pain and education of back pain had higher willing to receive the education in the future. However, workers were not obtained the knowledge information on back pain indicated lower scores.

• Water Engineering Research
• /
• v.3 no.2
• /
• pp.85-92
• /
• 2002

There has been continuous efforts to manage water resources for the required water quality criterion at river channel in Korea. However, we could obtain the partial improvement only for the point sources such as, waste waters from urban and factory site through the water quality management. Therefore, it is strongly needed that the best management practice throughout the river basin fur water quality management including non-point sources pollutant loads. This problem should be resolved by recognizing the non-point sources pollutant loads from the upstream river basin to the outlet of the basin depends on the landuse and soil type characteristics of the river basin using the computer simulation by a distributed model based on the detailed investigation and application of Geographic Information System (GIS). The purpose of this study is consisted of the three major distributions, which are the investigation of spread non-point sources pollutants throughout the river basin, development of the base maps to represent and interpret the input and outputs of the distributed simulation model, and prediction of non-point sources pollutant loads at the outlet of a up-stream river basin using Agricultural Non-Point Sources Model (AGNPS). For the validation purpose, the Seom-Jin River basin was selected with two flood events in 1998. The results of this application showed that the use of combined a distributed model and an application of GIS was very effective fur the best water resources and quality management practice throughout the river basin

• Journal of the Korea Concrete Institute
• /
• v.19 no.5
• /
• pp.647-653
• /
• 2007

In ready mixed concrete factory, in case of using the high molecular additive in winter especially the liquid additive for the early strength, it is required to check the stability. In this research, the freezing and gelling characteristics of the liquid additive for the early strength is reviewed, the material and mechanical solution are proposed to that the practical quality control method will be suggested. As the result, the Freezing temperature of the liquid additive for the early strength is $-11.8^{\circ}C$, and it is the lower than the temperature at which the strength is shown. By making with sodium silicate of $37{\pm}0.5%$ designed by $SiO_2\;and\;Na_2O$ in 0.31 of mol ratio, it minimizes the gelling at the lower temperature. On the other hand, facilities for storing and supplying the material should be set at $40^{\circ}C$ so the temperature distribution is well spreaded for practical operation.

• Korean Journal of Community Nutrition
• /
• v.3 no.2
• /
• pp.167-173
• /
• 1998

This study was performed to assess the lead and cadmium status of children residing in urban factory area and to see if there is a difference of lead and cadmium status between the group with normal iron status. The mean lead concentration of male hair was 9.55ppm which is significantly higher than 6.61 ppm that of female. The mean lead concentration of male urine sample was 0.04ppm, 10.3ppm and $48.14\mu{g/L}$, which is higher than 0.08ppm, 6.08ppm and $20.69\mu{g/L}$ of normal group, respectively. In a suboptimal group the proportion of children whose urinary lead is higher than normal$(35\mu{g/L)$was 87.3%, whereas 2.5% for a normal group. The mean cadmium concentration of male hair was 2.58ppm, which is higher than 2.48ppm that of a female. The mean cadmium concentration of erythrocyte, hair and urine was 0.25ppm, 2.65ppm and $38.83\mu{g/L}$, which is higher than 0.20ppm, 2.40ppm and $19.78\mu{g/L}$ of the normal group, respectively. The proportion of children whose urinary cadmium level is higher than the low limit of risk of cadmium intoxication$(40\mu{g/L)}$ was 21.4%, whereas 0% for a mormal group. Urinary lead and cadmium level showed significantly negative correlation with the RBC count, hematocrit, hemoglobin and serum ferritin, whereas they had significantly positive correlation with FEP/Hb(p<0.01). There was no correlation between the IQ and the level of lead and cadmium.

• Environmental Engineering Research
• /
• v.21 no.2
• /
• pp.196-202
• /
• 2016

Membrane bioreactor (MBR) technology has previously been used by water industry to treat high salinity wastewater. In this study, an anoxic-oxic biofilm-membrane bioreactor (AOB-MBR) system has been developed to treat mustard tuber wastewater of 10% salinity (calculated as NaCl). To figure out the effects of operating conditions of the AOB-MBR on membrane fouling rate ($K_V$), response surface methodology was used to evaluate the interaction effect of the three key operational parameters, namely time interval for pump (t), aeration intensity ($U_{Gr}$) and transmembrane pressure (TMP). The optimal condition for lowest membrane fouling rate ($K_V$) was obtained: time interval was 4.0 min, aeration intensity was $14.6 m^3/(m^2{\cdot}h)$ and transmembrane pressure was 19.0 kPa. And under this condition, the treatment efficiency with different influent loads, i.e. 1.0, 1.9 and $3.3kgCODm^{-3}d^{-1}$ was researched. When the reactor influent load was less than $1.9kgCODm^{-3}d^{-1}$, the effluent could meet the third discharge standard of "Integrated Wastewater Discharge Standard". This study suggests that the model fitted by response surface methodology can predict accurately membrane fouling rate within the specified design space. And it is feasible to apply the AOB-MBR in the pickled mustard tuber factory, achieving satisfying effluent quality.

• The Journal of Society for e-Business Studies
• /
• v.25 no.1
• /
• pp.109-121
• /
• 2020

The purpose of this study is to find out primary policies for reducing PM(particulate matter) as well as for improving the quality of life. Serious particulate matters cause to diverse healthcare and economy problems including business transactions. Unfortunately, until recently there are very few researches regarding the decision-making process for particulate matter policies. This study has applied the AHP(Analytic Hierarchy Process) method to develop cooperative policy making processes. The upper layer of this hierarchy analysis consists of four parts, i.e., transportation, production facility, living environment, and urban planning management. And each upper layer parts has their own three policies. 25 experts including policy-makers, academic researchers and industrial specialists have decided the primary policies and directions. The most significant PM policy is the mandatory reduction of air pollution and suspension of factory operation in the production industry. The results of this study can lead to guidelines for making environmental policies.

• The Korean Journal of Archival Studies
• /
• no.66
• /
• pp.37-67
• /
• 2020

Recently, industrial heritages have been transformed into cultural facilities in the wake of urban Regeneration. This focus is mainly on appearance, and the explanation is often abbreviated as a master narrative, and the placeness is not sufficiently inherited. The placeness of industrial heritage contains not only historical but also personal memories. Place memory must be collected and managed in order for the placeness that can be the source of identity to be preserved and utilized. To this end, this study suggested collecting place memories based on personal life histories. Using the case of collecting Andong Station and Cheongju Tobacco Factory, the life narrative was broken down into an event and the process of reinterpreting it as a place memory was proposed to implement archiving of industrial heritage sites. This methodology means that it can be supplemented rather than replaced.

• Land and Housing Review
• /
• v.7 no.4
• /
• pp.207-215
• /
• 2016

The purpose of this paper is to explore ways in the construction of Apartment-type factories in the public sector. Recently the markets of Apartment-type factories are driven by the private sector as high quality, high price and supply of in the form of office, these construction trends are different from the original aim of introduce policy of Apartment-type factories which supply production spaces in the city to small capital enterprises. We analyzed the architectural characteristics of Apartment-type factories in Korea, the prospect of their future construction trends and the survey results targeted to small enterprises. In the results of this survey, we grope for the direction for construct Apartment-type factories in the public sector. The Apartment-type factories constructed by the public sector are appropriate supply for manufacturing plants and sale rather than lease form to complement the private market. To optimize economically and functionally for manufacturing activities, the design space in the internal and external spaces is required in order to supply more affordable. Route design, especially considering parking, unloading and warehousing of merchandise, and logistics should be differentiated from the Apartment-type Factories constructed by private sector.