• Journal of Cadastre & Land InformatiX
• /
• v.52 no.1
• /
• pp.105-118
• /
• 2022

The demand for information related to 3D spatial objects model in metaverse, smart cities, digital twins, autonomous vehicles, urban air mobility will be increased. 3D model construction for spatial objects is possible with various equipments such as satellite-, aerial-, ground platforms and technologies such as modeling, artificial intelligence, image matching. However, it is not easy to quickly detect and convert spatial objects that need updating. In this study, based on spatial information (features) and attributes, using matching elements such as address code, number of floors, building name, and area, the converged building DB and the detected building DB are constructed. Both to support above and to verify the suitability of object selection that needs to be updated, one system prototype was developed. When constructing the converged building DB, the convergence of spatial information and attributes was impossible or failed in some buildings, and the matching rate was low at about 80%. It is believed that this is due to omitting of attributes about many building objects, especially in the pilot test area. This system prototype will support the establishment of an efficient drone shooting plan for the rapid update of 3D spatial objects, thereby preventing duplication and unnecessary construction of spatial objects, thereby greatly contributing to object improvement and cost reduction.

• Journal of Korea Water Resources Association
• /
• v.55 no.11
• /
• pp.969-977
• /
• 2022

In order to respond to the increase in water disasters due to climate change and urbanization, research on low impact development (LID) techniques and application to cities are expanding. The LID technique is a technology that reduces rainwater runoff in the city, controls various water disasters such as flash floods, etc. in an eco-friendly way, and restores the urban water circulation system to a natural water circulation system. However, quantitative analysis of stormwater runoff reduction through the LID technique is insufficient. Therefore, this study analyzed the ratio of the permeable area required to reduce the surface runoff of rainfall (25 mm/hr, 50 mm/hr, 100 mm/hr) with respect to the impervious watershed area of the old city using the permeable pavement. As a result of the analysis, it was found that a permeable area ratio of 7.14 to 12.63% of the total area was required for 25 mm/hr, 15.79 to 26.97% for 50 mm/hr, and 30 to 55.81% for 100 mm/hr.

• Journal of Korea Water Resources Association
• /
• v.55 no.8
• /
• pp.613-621
• /
• 2022

Due to the global climate change, the rainfall volume and frequency on the Korean Peninsula are predicted to increase at the end of the 21st century. In addition, impervious surface areas have increased due to rapid urbanization which has caused the urban water cycle to deteriorate. Green Infrastructure (GI) researches have been conducted to improve the water cycle soundness; the efficiency of this technique has been verified through various studies. However, there are still no suitable GI design guidelines for this aspect. Therefore, the rainfall scenarios are set up for each percentile (60, 70, 80, 90) based on the volume and frequency analysis using 10-year rainfall data (Busan Meteorological Station). After determining the GI areas for each scenario, the runoff reduction characteristics are analyzed based on Storm Water Management Model (SWMM) 10-year rainfall-runoff-simulations. The total runoff reduction efficiency for each GI areas are computed to have a range of 13.1~52.1%. As a results of the quantitative analysis, the design rainfall for GI is classified into the 80~85 percentile in the study site.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.12
• /
• pp.33-40
• /
• 2021

The deterioration of underground facilities, disturbance of the ground due to underground development activities, and changes in ground water can cause ground subsidence accidents in the urban areas. The investigation on the geotechnical and hydraulic factors affecting the ground subsidence accident is very significant to predict the ground subsidence risk in advance. In this study, an analysis DB was constructed through 3D ground modeling to utilize the currently operating geotechnical survey information DB and ground water behavior information for risk prediction. Additionally, using these results, the relationship between the actual ground subsidence occurrence history and ground conditions and ground water level changes was confirmed. Furthermore, the methodology used to visualize the risk of ground subsidence was presented by reconstructing the engineering characteristics of the soil presented according to the Unified Soil Classification System (USCS) in the existing geotechnical survey information into the internal erosion sensitivity of the soil, Based on the result, it was confirmed that the ground in the area where the ground subsidence occurred consists of more than 40% of sand (SM, SC, SP, SW) vulnerable to internal erosion. In addition, the effect of the occurrence frequency of ground subsidence due to the change in ground water level is also confirmed.

• Journal of Digital Convergence
• /
• v.20 no.5
• /
• pp.463-476
• /
• 2022

After industrialization in the past, the automobile industry has continued to grow centered on internal combustion engines, but is facing a major change with the recent 4th industrial revolution. Most companies are preparing for the transition to electric vehicles and autonomous driving. Therefore, in this study, topic modeling was performed based on LDA algorithm by collecting 4,002 domestic papers and 68,372 overseas papers that contain keywords related to CASE (Connectivity, Autonomous, Sharing, Electrification), which represent future automobile trends. As a result of the analysis, it was found that domestic research mainly focuses on macroscopic aspects such as traffic infrastructure, urban traffic efficiency, and traffic policy. Through this, the government's technical support for MaaS (Mobility-as-a-Service) is required in the domestic shared car sector, and the need for data opening by means of transportation was presented. It is judged that these analysis results can be used as basic data for the future automobile industry.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.28-41
• /
• 2022

A road system with CV(Connected Vehicle)s, which is often referred to as a cooperative intelligent transportation system (C-ITS), provides various road information to drivers using an in-vehicle warning system. Road environments with CVs induce drivers to reduce their speed or change lanes to avoid potential risks downstream. Such avoidance maneuvers can be considered to improve driving behaviors from a traffic safety point of view. Thus, empirically evaluating how a given in-vehicle warning information affects driving behaviors, and monitoring of the correlation between them are essential tasks for traffic operators. To quantitatively evaluate the effect of in-vehicle warning information, this study develops a method to calculate compliance rate of drivers where two groups of speed profile before and after road information is provided are compared. In addition, conventional indexes (e.g., jerk and acceleration noise) to measure comfort of passengers are examined. Empirical tests are conducted by using PVD (Probe Vehicle Data) and DTG (Digital Tacho Graph) data to verify the individual effects of warning information based on C-ITS constructed in Seoul metropolitan area in South Korea. The results in this study shows that drivers tend to decelerate their speed as a response to the in-vehicle warning information. Meanwhile, the in-vehicle warning information helps drivers to improve the safety and comport of passengers.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.316-316
• /
• 2023

2022년 8월 수도권 이상폭우로 인해 서울 도심지역의 지하시설, 도로, 주택 등에 침수가 발생하면서 인명 및 재산피해가 발생하였으며, 특히 동서로 가로지르는 정체전선으로 좁고 긴 비구름이 집중되면서 국지적으로 피해가 집중되었다. 서울시의 경우 도시화에 따른 불투수지역 증가 및 내수배제 불량에 따른 빗물 역류로 인한 피해가 지속적으로 발생하고 있으며, 최근에는 기후변화에 따른 방재성능목표 강우량을 초과하는 빈도의 이상폭우로 인해 하천범람과 내수배제 불량에 따른 복합적인 원인으로 침수피해 가중되고 있는 실정이다. 또한 서울시의 경우 전체 자연적, 사회적, 경제적, 환경적 요인 등의 지역적 편차가 매우 큰 도시로 지형적인 특성뿐만 아니라 취약시설(병원, 학교 등), 수방시설물(하천, 배수시설, 빗물펌프장 등) 및 방재시설(대피소, 구호소 등) 밀도 등에 따른 침수 취약성 및 위험성 등의 편차가 매우 크기 때문에 지역특성에 대한 피해사례가 다원화 되고 있는 실정이다. 본 연구에서는 30년 이상의 종관기상관측(ASOS)과 서울시 자치구별 20년 이상의 방재기상관측(AWS)자료를 기반으로 CMIP6 SSP(Shared Socioeconomic Pathways, 공통사회 경제경로)시나리오에 따른 극한기후 지수(강수강도, 호우일수, 지속기간, 1일 최대강수량, 95퍼센타일 강수일수 등)에 대한 재현성을 평가하고 공간자기상관분석 등 시공간적인 강우특성에 대한 변화를 전망하였다. 특히 여름철 강우의 경우 자치구별 편차가 크게 나타났고 이를 통해 대도시의 도심지역의 경우 세분화하여 지역의 정확한 강우특성을 파악하는 것이 필요하다는 것을 확인할 수 있었다. 본 연구의 결과는 도심지의 방재성능 초과강우 정의와 기준을 수립하고, 장기적인 수자원 및 도시계획 차원의 대책을 마련하는데 활용될 수 있을 것으로 판단된다. 기후위기에 따른 기록적인 호우(지역별 방재성능을 초과하는 강우)에 따른 재해는 구조적인 대책을 통해 모두 저감할 수 없는 한계가 있다. 하지만 인명피해를 최소화하는 것을 목표로 기후위기에 대한 적응단계로 인식하고 수리·수문학적, 사회경제학적 등 지역특성에 따른 방재성능목표 강우량에 대한 재검토와 더불어 법제도(풍수해보험, 저류조설치 의무화 등), 개인별 재해예방, 취약계층 안전망 확보, 반지하주택 침수안전대책, 재해지도 개선 등 구조적/비구조적인 대책을 통합 수립 및 보완하는 것이 필요한 시점이다.

• Land and Housing Review
• /
• v.14 no.3
• /
• pp.125-135
• /
• 2023

In South Korea, it has been increased the necessity of supplying housing services to meet the needs and desires of various residents by reflecting various demographic and social changes. In particular, various smart device has been widely utilized in South Korea and the smart technologies, such as artificial intelligence and the Internet of Things has been developed rapidly. These smart technologies could support smart housing that allows residents to easily and comfortably employ residential services. However, it is necessary to improve the awareness of users in order to spread the smart housing residential services connected to smart technologies. For this reason, this study observed changes in users' perceptions of smart housing residential service technology using Living Lab. As a result, after experiencing the Living Lab, users' awareness of smart housing housing service increased, and it was observed that the preferred housing service technology was more detailed than before the Living Lab experience. This study shows that it is important to raise users' awareness for the dissemination of smart housing residential service technology, and that Living Lab can be an effective means for this purpose.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.2
• /
• pp.219-230
• /
• 2023

Cities are continued to be highly advanced and metropolitanized. Lands adjacent to road make entry/exit connection increase along with construction of facilities for various purposes. However, in the absence of specific installation standards of entry and exit connection, inappropriate access location, types of access, and operation methods are deteriorating the level of traffic services at existing roads and intersections. Therefore, in order to minimize the traffic impact from entrances connected to minor arterial roads and colletor roads, first, this study re-established the waiting length in the intersection of upstream and downstream and length required for changing lanes and between entrance/exit and connection, considering the road and traffic environment in contact with the entrance. Second, it is suggested that the operation method depending on the connection type and whether to install left turn lane and acceleration and deceleration lane can be determined quantitatively by relation with the service level of nearby intersection after calculating the threshold amount of business site through negative social cost, which is the difference between the installation cost of the left turn lane and the acceleration and deceleration lane according to the type of access to the entrance and exit.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.2
• /
• pp.55-66
• /
• 2009

At the mudstone slope located on the roadside of the Seokri area in Donghae-myeon, Pohang, Gyeongsangbuk-do, this study was performed to analyze the effects of rainfall on the stability of slope through seepage analysis according to the precipitation type of the mudstone slope, referring to the actual case of slope failure. For this, precise geological survey, geophysical exploration and drilling survey for the slope where the failure occurred were performed and followed by analysis of detailed soil layer. For the section where failure surface located, the durability reduction of rocks was measured through slaking/swelling tests and the permeability was measured through in-situ permeability tests for each soil layer. In addition, the change of strength parameter and process of instability were analyzed by back analysis, using Talren 97 and Slope/W programs, in the slope. By applying different precipitation conditions to the geographical conditions of the slope that had actual failure records, the slope stability was analyzed by seepage analysis according to duration of rainfall and rise of groundwater level resulting from the flow of rainfall caused by development of geological structures and the slope surface condition.