• 한국자동차공학회논문집
• /
• 제22권5호
• /
• pp.29-34
• /
• 2014

Cooling the in-wheel motor in electric vehicles is critical to its performance and durability. In this study, thermal flow analysis was conducted by evaluating the thermal performance of two conventional cooling models for in-wheel motors under the continuous rating base speed condition. For conventional model #1, in which cooling oil was stagnant in the lower end of the motor, the maximum temperature of the coil was $221.7^{\circ}C$; for conventional model #2, in which cooling oil was circulated through the exit and entrance of the housing and jig, the maximum temperature of the coil was $155.4^{\circ}C$. Therefore, both models proved unsuitable for in-wheel motors since the motor control specifications limited the maximum temperature to $150^{\circ}C$.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.675-680
• /
• 2008

This paper proposes a way to measure the displacement of a multi-point by using a pattern recognition from video signal. Generally in measuring displacement, gab sensor, which is a displacement sensor, is used. However, it is difficult to measure displacement by using a common sensor in places where it is unsuitable to attach a sensor, such as high-temperature areas or radioactive places. In this kind of places, non-contact methods should be used to measure displacement and in this study, images of CCD camera were used. When displacement is measure by using camera images, it is possible to measure displacement with a non-contact method. It is simple to install and multi-point displacement measuring device so that it is advantageous to solve problems of spatial constraints.

• Journal of Chest Surgery
• /
• 제34권11호
• /
• pp.865-869
• /
• 2001

광범위한 대동맥류의 수술은 주로 elephant trunk 술식을 이용한 단계적인 수술로 이루어 지고 있다. 그러나 elephant trunk 술식을 적용하기 힘든 경우 동시 치환을 고려하여야 한다. 과거 급성 대동맥박리로 상행대동맥 수술을 받은 과거력이 있는, 마르팡 증후군이 의심되는 35세 환자에서 대동맥 근위부의 대동맥류 및 하행대동맥류 파열이 발생하여 대동맥 판막에서부터 횡격막에까지 전 흉부대동맥 동시치환술을 성공적으로 시행하였기에 문헌 고찰과 함께 보고한다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.194-197
• /
• 1999

In AVL, GIS analyze the information from the vehicles to provide commercial or other value far user. As spatial analysis functions in GIS make a new valuable information using the vehicle's position and geographic object's location, they perform an important roles to improve the management efficiency of vehicles. Most GIS however are used static data for the spatial analysis, so the research area on AVL used dynamic vehicle location has generated unsuitable result. In this study, we use GPS real time tracking data to perform spatial analysis between moving vehicle and static geographic object. The method proposed in this paper considers the driving direction of vehicle and creates the result which is located in forward of vehicle. In this paper, two spatial analysis functions, near and connectivity, are developed.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2001년도 The Pacific Aisan Confrence On Intelligent Systems 2001
• /
• pp.310-315
• /
• 2001

We are focusing on an approach which handle a general Web as a resource in order to support self-directed learning for a student. Then, we are developing a Web based learning environment "Web-Retracer"for utilizing Web as teaching materials by a user′s Annotation. Although the learner can share the Web resource that the others utilized in this environment, Web resources unsuitable for a student′s needs becomes hindrance about her/his self-directed learning. In this paper, we propose a recommending method of the resource united with a student′s needs on the basis of a student′s learning and Web browsing history. This method analyzed the feature peculiar to a resource, and extracts the resource with which the needs of the feature and a student agreed.

• 한국컴퓨터산업학회논문지
• /
• 제6권2호
• /
• pp.305-316
• /
• 2005

A heterogeneous webserver such as an HTTP server should be able to currently deal with numerous users. To the end, it is inevitable to formally analyze web traffics as well as a webserver itself. In particular, as most systems adopt HTTP 1.1 protocol instead of HTTP 1.0 protocol, it is more difficult to represent the system as a simple analytic mode. In addition, since most of previous models missed the detailed processes of the server, it is unsuitable for the current server based on HTTP 1.1 to tune itself with its own system parameters. On the basis of HTTP 1.1 Protocol supporting persistent connections, we thus present an analytical end-to-end tandem queueing model considering specific hardware configurations inside the webserver, which ultimately covers from accepting the customer requests to completing the services.

• The Korean Journal of Ecology
• /
• 제8권3호
• /
• pp.141-146
• /
• 1985

Colonization ability was studied with Lemna paucicostata and Spirodela polyrhiza. Colonization ability of each species was defind as its ability to; (1) tolerate to desiccation, (2) multiplicate and spread in the new habitat, (3) inhibit the other species competitively. Lemna paucicostata was inferior to Spirodela polyrhiza in ability (1), but superior to Spirodela polyrhiza in abilities (2) and (3). Whenever lemna paucicostata and Spirodela polyrhiza are colonized recently, only these three abilities can not explain which species is better colonist. Even short unsuitable periods would eliminate a species, with time lag occurring before recolonization. This would result in a discontinuous of the species concerned.

• 한국멀티미디어학회논문지
• /
• 제23권6호
• /
• pp.756-764
• /
• 2020

A typical algorithm used for image analysis is the Convolutional Neural Network(CNN). R-CNN, Fast R-CNN, Faster R-CNN, etc. have been studied to improve the performance of the CNN, but they essentially require large amounts of data and high algorithmic complexity., making them inappropriate for small and medium-sized services. Therefore, in this paper, the image label prediction algorithm based on CNN with collaborative layer with low complexity, high accuracy, and small amount of data was proposed. The proposed algorithm was designed to replace the part of the neural network that is performed to predict the final label in the existing deep learning algorithm by implementing collaborative filtering as a layer. It is expected that the proposed algorithm can contribute greatly to small and medium-sized content services that is unsuitable to apply the existing deep learning algorithm with high complexity and high server cost.

• 대한방사선기술학회지:방사선기술과학
• /
• 제2권1호
• /
• pp.51-54
• /
• 1979

Research and Analisis for the qualities of chest films of emergency cases were completed in order to produce a valuable one of diagnostic necessity. It is resulted as follows; 1. Among the 3,505 cases of chest films, 47% of them was poor conditioned the reason was fowned as of unsuitable exposure. 2. It become the same condition when we increased 11.4% of KVp in full exhalation compare with the full inhalation of erect position and 20% after full exhalation and 4.3% after full inhalation in supine position. The result was that no difference between prone position and supine position was fowned. 3. When respiration volume is different, proper control of KVp is extremely needed.

• 대한기계학회논문집
• /
• 제3권4호
• /
• pp.133-142
• /
• 1979

The fracture toughness of a hot rolled 100 mm thick SS41 steel plate was investigated for various crack ratios and thichnesses using the method of J-integral. The experiments were performed on an MTS machine and the crack initiation point was detected by using an electricl impedance method. The J-integral computed at the initiation point of the slow stable crack growth was almost constant within the range of crack ratios tested. The fracture toughness thus obtained was $J_{1c}/=27.0kgf/mm$ for specimens having fracture plane parallel to the rolling direction and 35.5kgf/mm for those perpendicular to the rolling direction. The J- integral computed at maximum load point was found to be unsuitable for fracture toughness determination, becaese of large variation depending on the crack ratio and thickness. It was also found that the slow stable crack growth increases as the thickness and/or crack ration of the specimen decrease.