• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.454-458
• /
• 1999

This study is to analyze the causes of flood damage in Imjin river basin inAugust , 1999. and to propose the measure to reudce such flood damage. The northern part of Kyonggin Province in the basin was severely damaged by flood due to the heavy rainfall for 4 days from 31 July to 3 August, whioch was recordedas 1,032mm. The heavy rainfall worth recording was one of main cuasese of such damage, but unsuitable river improvement and basin management were also important causes. The flood proptection works such as flood control reservoir and riverlevee were not contructed or sufficient in spite of the unflavorable geographical conditions of Imjin reiver. In case of irrigatiion faciliteis, 43 pumping stations in 3 FIAs were severely damaged due to inundation of the pump and switch boxes. The protection works for pump room should be improved to reduce the damage due to inundation.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.1
• /
• pp.137-142
• /
• 2005

Biomedical signals such as ECG, EMG, and EEG are extremely important in the diagnosis of patients. It is difficult to filter noise from these signals, and errors resulting from filtering can distort a biomedical signal. Existing systems have shown poor performance when complicated noise appears. Adaptive filtering is selected to contend with these defects. Existing adaptive filters can adjust the filter coefficient with the given filter order, but they can produce an unsuitable order in different environments. In order to solve this problem, an optimal adaptive filter with a dynamic structure was designed. Positive experimental results were obtained.

• Journal of Power Electronics
• /
• v.13 no.1
• /
• pp.31-39
• /
• 2013

The conventional non-isolated boost converter has some drawbacks such as poor dynamic performance and a discontinuous output current, which make it unsuitable for battery charging applications. In spite of its compactness and lightness, it is not preferred as a charger of portable electronic devices. In this paper, a non-isolated boost converter topology for Li-ion batteries suitable for fuel cell powered laptop computers is proposed and analyzed. The proposed converter has an additional inductor at the output to make a continuous output current. This feature makes it suitable for charger applications by eliminating the disadvantages of the conventional non-isolated boost converter mentioned above. A prototype of the proposed converter is built for the Li-ion battery charger of a laptop computer to prove the validity and advantages of the proposed topology.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.605-607
• /
• 2000

Although Equvalent Magnetic Circuit (EMC) method. Using lumped parameter and numerical analysis method are widely used for electric machine analysis. these are neither always accurate enough nor sometimes available to easily use. Moreover three dimensional finite element method (3D-FEM) is inherently unsuitable for electric machine performance evaluation due to its poor computational efficiency, such as too long calculation time and difficulty in modeling for analysis. In this paper, Nonlinear Equivalent Magnetic Circuit (NEMC) method in combination with 2D-FEM is proposed to analyze the electric machine requiring 3D-FEM, and this method applys to torque evaluation for rotary actuator of Electro Magnetic Electronic Controller Power Steering (EM-ECPS).

• Korean Medical Education Review
• /
• v.15 no.2
• /
• pp.61-68
• /
• 2013

During the Japanese colonial period in the Korean Peninsula, Chosun (ethnic Korean) physicians were trained in vocational clinical schools, but Japanese physicians in medical school. Therefore, the Japanese government treated the Japanese physicians as medical doctors but Chosun physicians as dealers or traders in clinical services. This colonial discriminatory policy became a habitual concept to Korean physicians. Because of these traditional concepts regarding physicians, after the colonial period, the newly established Korean government also had the same concept of physicians. Therefore, in 1952, the Korean graduate medical education system was launched under a government clearance system with the claim of supporting medical specialties as clinical dealers or clinical businesspeople. During the last 60 years, this inappropriate customary concept and the unsuitable system have evolved into medical residency training education, and then into graduate medical education. Today graduate medical education has become inextricably linked to postdoctoral work in Korean hospitals.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.138-143
• /
• 2004

Recently there has been a great world-wide interest in developing and characterizing new nano-structured materials. These newly developed materials are often prepared in limited quantities and shapes unsuitable for the extensive mechanical testing. The development of depth sensing indentation methods have introduced the advantage of load and depth measurement during the indentation cycle. In the present work, ZnO thin films are prepared on Si(111), Si(100) substrates at different temperatures by pulsed laser deposition(PLD) method. Because the potential energy in c-axis is low, the films always show c-axis orientation at the optimized conditions in spite of the different substrates. Thin films are investigated by X-ray diffractometer and Nano indentation equipment. From these measurements it is possible to get elastic modulus and hardness of ZnO thin films on Si substrates.

• Journal of the Korea Society for Simulation
• /
• v.14 no.3
• /
• pp.137-146
• /
• 2005

In parametric approach to a signature verification, it generally uses so many redundant features unsuitable for each individual signature that it causes harm, instead. This paper proposes a method of determining personalized weights of a feature set in signature verification with parametric approach by identifying the characteristics of each feature. For an individual signature, we define a degree of how difficult it is for any other person to forge the one's (called 'DFD' as the Degree of Forgery Difficulty). According to the statistical characteristics and the intuitional characteristics of each feature, the standard features are classified into four types. Four types of DFD functions are defined and applied into the distance calculation as a personalized weight factor. Using this method, the error rate of signature verification is reduced and the variation of the performance is less sensitive to the changes of decision threshold.

• Journal of the Ergonomics Society of Korea
• /
• v.15 no.1
• /
• pp.119-132
• /
• 1996

The objectives of this study are to investigate the measurements of clothing for the handicapped compared to that of the normal, and to present the basic data to make clothing for the handicapped who has specific needs. Questionnaires were administered to 927 Cerebral Palsies on height, weight, chest circumference, sitting height, and to 70 handicapped people using a supporting parasite on 18 measurement items. The results show that height, weight , and sitting height of the handicapped are smaller than those of the normal of equal age except for chest circumference. And, the values of the items for the lower half are smaller than the normal of equal age and those for the upper half, especially the items for the shoulder and arm, are greater. Compared to the values of the normal in the three standad size charts, the size charts using height and chest circumference are unsuitable to the handicapped, and the size chart using hip circumference is approximately suitable.

• Asia-Pacific Journal of Business
• /
• v.6 no.1
• /
• pp.45-57
• /
• 2015

The purpose of this research is to explore the relationships among service quality's five factors(i.e., tangibles, reliability, responsiveness, empathy, and assurance) and customer satisfaction. The study used convenience sampling and selected certain consumers who visited coffee shop in BeiJing, China. Total 300 questionnaires was distributed and 18 unsuitable data were excluded for data analysis. These data were tested using SPSS 21.0. The results of this study are summarized as follows. First, the result of the relationship between coffee shops'service quality and customer satisfaction reveals that two of 5 service quality factors (i.e., assurance and empathy) had a positive effect on customer satisfaction only, and other service quality factors (i.e., tangibles, reliability, and responsiveness) had no positive influence on customer satisfaction. Limitations and future research directions of the study were also discussed.

• Journal of Korean Association for Spatial Structures
• /
• v.5 no.2 s.16
• /
• pp.7-15
• /
• 2005

Currently, the structural material, namely glass fiber reinforced polymer (GFRP) is focused on innovative structure due to lightness, excellent workability and noncorrosive characteristics, etc. However, the lack of GFRP connection technology produces only an imitation of steel and wood structures. This uses univentive design principles as well as unsuitable material applications, causes tons of surplus of materials to be wasted, and results in uneconomical structures, because the characteristics between steel and GFRP are completely different. Thus, this research develops the new, innovative GFRP connection system with considerations of the characteristics of GFRP and adopts it to a mobile und modular membrane pavilion.