• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.492-495
• /
• 1995

A simple method to design observers for linear describtor systems with unmeasureable disturbance is represented by the response of a linear free system. The sufficient conditions for the existence of the observer are given. The design procedures of an identify and a minimal order observers are shown, respectively.

• 대한전기학회논문지
• /
• 제35권2호
• /
• pp.77-84
• /
• 1986

The design of observers for the systems with unknown and unmeasurable disturbances is treated. A generalized observer design method is proposed and existence conditions are established by combining the existing two different approaches` disturbance modelling approach by O'Reilly and algebraic approach by Kudva et. al.. The proposed approach, therefore, takes the advantages and removes the shortcomings of the existing two approaches in view points of dimensionality and existence conditions of the observer. To show the usefulness of the approach, a numerical example is given.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권4호
• /
• pp.165-174
• /
• 2000

This paper presents the application of H$\infty$ control synthesis using LMI optimization method to power system stabilizer(PSS) design. Since power system is usually operated under circumstance of unmeasurable uncertainties and external disturbances, the improvement of small signal stability becomes one of the most important issue for securing system stability and preventing low frequency oscillation phenomena. The LMI optimized H$\infty$ PSS provides robust performance and guarantees the internal stability under these operating conditions. The global optimal H$\infty$ norm is found using LMI convex optimization method which is more systematic than standard two Riccati solution method. The design results are simulated for a case study. We verified that the LMI method shows the best performance characteristic smong standard Riccati method and conventional lead/lag method.

• 대한전기학회논문지
• /
• 제43권3호
• /
• pp.458-467
• /
• 1994

It has been well known that the assumption of full state availability is one of the most important restrictions to the practical realization of VSCS. And several attempts to alleviate the assumption had been made. however, it is not easy to find a positive scheme among them. Recently, an output feedback variable structure control system(OFVSCS) was proposed and the effectiveness of the scheme was validated for the disturbance free systems. The purpose of this study is to propose a robust OFVSCS that have the robust properties against process parameter variations and external disturbances by extending the basic OFVSCS and to evaluate its control performances. The ROFVSES is composed of dynamic switching function and output feedback switching control inputs that are constructed by the use of the unknown vector modeling technique. With the proposed schems, existence of sliding mode is guaranteed and any nonzero bias can be suppressed in the face of disturbances and process parameter variations as far as well-known matching condition is satisfied. Due to the fact that the ROFVSCS is driven by small number of measured informations, the practical application of VSCS for the systems with unmeasurable states and for high order systems, the conventional schemes cannot be applied, is possible with the proposed scheme. It is noticeable that the implementation cast of VSCS can be considerably reduced without sacrifice of control performances by adopting ROFVSCS since there is no need to measure the states with high measurement cost.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.433-435
• /
• 1993

The purpose of this study is to propose a robust OFVSCS that have the robust properties against process parameter variations and external disturbances by extending the basic OFVSCS and to evaluate its control performances. The ROFVSCS is composed of dynamic switching surfaces and output feedback switching control inputs that are constructed by the use of the unknown vector modeling technique. With the proposed scheme. existence of sliding mode is guaranteed and any nonzero bias can be suppressed in the face of disturbances and process parameter variations as far as well-known matching condition is satisfied. Due to the fact that the ROFVSCS is driven by small number of measured information, the practical application of VSCS for the systems with unmeasurable states and for high order systems. that conventional schemes cannot be applied, is possible with the proposed scheme. It is noticeable that implementation cost or VSCS can be considerably reduced without sacrifice of control performances by adopting ROFVSCS since there is no need to measure the states with high measurement cost.

• 전기의세계
• /
• 제29권10호
• /
• pp.667-677
• /
• 1980

A new approach for optimal decentralized load-frequency control in a multi-area interconnected power system is presented, which includes the optimal determination of decentralized load-frequency controller, observer for unmeasurable local states and load disturbances, quadratic estimator for tie-line power flow information transmitted at intervals. The optimal design of the decentralized controller is based on a modified application of the singular perturbation theory, and the decentralized Luenberger obeserver uses techniques of state augmentation for exponential disturbance functions and the representation of tie-line power flow states as non-directly-controlled inputs. The approach presented herein is numerically tested through Elgerd's two-area load-frequency system model, and the results demonstrate remarkable advantages over the conventional ones.

• 드라이브 ㆍ 컨트롤
• /
• 제14권4호
• /
• pp.61-70
• /
• 2017

In this study, an extended-state-observer (ESO) based non-linear servo control is introduced for an electro-hydrostatic actuator (EHA). Almost hydraulic systems not only are highly non-linear system that has mismatched uncertainties and external disturbances, but also can not measure some states. ESO that only use an output signal can be used to compensate these uncertainties and estimate unmeasurable states. To improve the position tracking performance, the barrier Lyapunov function (BLF) that can guarantee an output tolerance is introduced for the position tracking error signal of back stepping control procedures. Finally, the proposed servo control is compared with the proportional-integral (PI) control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1199-1205
• /
• 1993

It has been well known that the assumption of full state availability is one of the most important restrictions to the practical realization of VSCS. And several attempts to alleviate the assumption had been made. However, it is not easy to find a positive scheme among them. Recently, an output feedback variable structure control system(OFVSCS) was proposed and the effectiveness of the scheme was validated for the disturbance free systems. The purpose of this study is to propose a robust OFVSCS that have the robust properties against process parameter variations and external distrubances by extending the basic OFVSCS and to evaluate its control performances through power system stabilizer design example. The ROFVSCS is composed of dynamic switching function and output feedback switching control inputs that are constructed by the use of the unknown vector modeling technique. With the proposed scheme, existence of sliding mode is guaranteed and any nonzero bias can be suppressed in the face of disturbances and process parameter variations as far as well-known matching condition is satisfied. Due to the fact that the ROFVSCS is driven by small number of measured informations, the practical application of VSCS for the systems with unmeasurable states and for high order systems that conventional schemes cannot be applied, is possible with the proposed scheme. It is noticeable that the implementation cost of VSCS can be considerably reduced without sacrifice of control performances by adopting ROFVSCS since there is no need measure the states with high measurement cost.

• 한국지능시스템학회논문지
• /
• 제5권4호
• /
• pp.101-110
• /
• 1995

본 연구에서는 직류 서보전동기의 위치, 속도 및 토오크 등의 제어기법중 외란에 대해 강인한 것으로 평가되고 있는 기존의 가속도 제어기법을 해석하고 그 결과 적용상의 문제점으로 판단되는 계통 파라미터 변화에 대한 강인성을 개선하기 위한 대책으로서 변경된 가속도제어 루프를 포함한 위치제어계를 제안하고 이를 직류전동기의 위치제어게 적용하였다. 제안된 제어계는 가속도제어기와 자기종조 퍼지 PID 제어기로 구성되어 있으며 제안된 제어계와 기존의 가속도제어계와의 근복적 차이점은 이 제어기법의 핵심 요소라 할 수 있는 가속도 기준입력 정정량의 발생기구로서 고전적 PID제어기를 자동조정하는 자기동조 PID 제어방식을 채택하였다는 점이다. 이 기준입력 발생기구를 도입한 직류전동기 위치제어계의 성능을 검토하기 위하여 그 응답특성을 기존의 가속도제어 위치제어계의 응답특성과 비교한 결과 파라미터 변화에 대한 강인성, 과도 특성 및 정상상태 특성면에서 제안된 제어계가 매우 우월한 성능을 가짐을 확인하였다. 따라서 제안된 제어기법은 기존의 가속도제어에 근거한 위치제어계의 성능을 개선시켜줌으로써 이 제어기법의 적용범위 확대에 기여하며 특히 모델의 불확정성이 크거나 부하등 운전환경이 크게 변화하는 악조건 하에서의 정밀한 위치제어에 적용될 수 있다.