• Journal of Advanced Marine Engineering and Technology
• /
• 제37권7호
• /
• pp.737-742
• /
• 2013

Recently, unmanned aircrafts for safe measurement in hazardous locations have been developed. In a method of operation of unmanned aircraft vehicles (UAV), there are two methods of manual control and automatic control. Small UAVs are used for low altitude surveillance flights where unknown obstacles can be encountered. Obstacle avoidance is one of the most challenging tasks which the UAV has to perform with high level of accuracy. In this study, we used a laser range finder as an obstacle detector in automatic navigation of unmanned aircraft to patrol the destination automatically. We proposed a system to avoid obstacles automatically by measuring the angle and distance of the obstacle using the laser range finder.

• International journal of advanced smart convergence
• /
• 제9권3호
• /
• pp.207-214
• /
• 2020

Currently, the operation of unmanned aerial vehicle (UAV) is regulated to be able to fly only within the visible range, but in recent years, the needs for operation in the invisible area, in the urban area and at night have increased. In order to operate UAVs in the invisible area, at night, and in the urban area, a flight path for UAVs must be prepared like those operated by manned aircraft, and for this, it is necessary to establish an unmanned aircraft system traffic management (UTM). In order to establish the UTM, information on the minimum separation distance to prevent collisions with UAVs and buildings is required, and accordingly, information on the navigation performance of UAVs is required. In order to analyze the navigation performance of an UAV, total system error (TSE), which is the difference between the planned flight path and the actual location of the UAV, is required. If the collected data are insufficient and classification according to integrity, independence, and direction is not performed, accurate navigation performance is not derived. In this paper, propose a navigation performance analysis method of UAV that is derived TSE using flight data and modeled with normal distribution, analyze performance.

• 공학교육연구
• /
• 제17권5호
• /
• pp.17-22
• /
• 2014

Unmanned aerial vehicles (UAVs) that have been recently commercialized can largely be divided into fixed-wing aircraft and rotor aircraft by their styles and flight characteristics. Although the fixed-wing aircraft represents higher power efficiency, higher speed, longer flight distance and larger loading weight than the rotor aircraft, they have a disadvantage of requiring a space for take-off and landing. On the other hand, the rotor aircraft can implement vertical take-off and landing (VTOL) and represents various flight modes (hovering, steep bank turns and low-speed flights). But they require both precision take-off control and attitude control. In this study, we used a quad-tilt rotor UAV to combine advantages in both the fixed-wing aircraft and the rotor aircraft. The quad-tilt rotor (QTR) system was designed and constructed by adding a tilt device with a servo motor to a general quad-rotor vehicle.

• 한국항공운항학회지
• /
• 제24권4호
• /
• pp.81-86
• /
• 2016

Unmanned aerial vehicles(UAVs) are increasingly used in civilian areas as well as in military areas due to the technological advancement of UAVs. In response to the increasing demand in UAVs, many studies are under way to integrate the airspace between manned aircraft and UAV. The development of flight test can secure the performance and flight characteristics of the designed aircraft. And the capability of research and development can be expanded through the accumulation of technical data. It is also essential to verify the correct performance and characteristics of development aircraft themselves. In this paper, we propose development flight test procedures and items for civilian UAVs.

• 융합정보논문지
• /
• 제9권11호
• /
• pp.118-124
• /
• 2019

무인항공기의 기술이 많이 보급화 되면서 다양한 종류의 무인항공기 및 임무 다변화에 따라 다양한 종류의 임무 장비가 개발되고 있다. 그중에서도 국내에서는 소형 무인항공기가 활발히 개발되고 있으며 소형 무인기의 효과적인 조정을 위한 비행제어 시스템과 임무 장비의 연동 시스템이 필요하고, 또한 데이터를 처리하여 지상 운용시스템으로 전송을 위한 효율적인 통신장비의 구성 및 운용이 요구되고 있다. 본 논문에서는 소형 무인항공기의 임무 및 제어를 위하여 비행제어 시스템과 임무 장비 제어 시스템을 이용한 임무 장비의 확장, 데이터 링크 통합 및 통신장비 운용에 대하여 서술하였으며 이를 통하여 효과적인 소형 무인항공기의 운용에 대하여 정리하였다.

• International Journal of Control, Automation, and Systems
• /
• 제4권6호
• /
• pp.782-787
• /
• 2006

The role of Unmanned Aircraft Vehicles(UAVs) has been increasing significantly in both military and civilian operations. Many complex systems, such as UAVs, are difficult to model accurately because they exhibit nonlinearity and show variations with time. Therefore, the control system must address the issues of uncertainty, nonlinearity, and complexity. Hence, identification of the mathematical model is an important process in controller design. In this paper, attitude dynamics identification of UAV is investigated. Using the flight data, nonlinear state space model for attitude dynamics of UAV is derived and verified. Real time simulation results show that the model dynamics match experimental data.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.145-150
• /
• 2006

The paper deals with integrated navigation and sense & avoid systems for small unmanned aerial vehicles (UAV). First an introduction to the current UAV activities of the institute is given. It is followed by an overview about the integrated navigation system developed for small UAVs. The system is based on a tightly-coupled GPS/INS architecture. But instead of using delta-ranges, time-differenced carrier phases are used to aid the INS. Finally, results from navigation filter validation in flight tests are presented. After that an overview about sense and avoid strategies for application in small unmanned aircraft is given. From this a guideline for developing such a system for the institute's UAVs is presented.

• 한국군사과학기술학회지
• /
• 제23권6호
• /
• pp.618-638
• /
• 2020

An unmanned aerial vehicle(UAV) refers to an aircraft that has all or part of its functions to autonomously fly by grasping the surrounding environment by remote control on the ground without a pilot on board. With the development of unmanned aerial technology, civil/military forces are developing unmanned aerial vehicles for various purposes. In order to control unmanned aerial vehicles from the ground, communication protocols between unmanned aerial vehicles and ground control equipment are required, and civil/military forces have developed and used a photocall for different purposes. In this study, the characteristics of the MAVLink protocol used in the private sector and the STANAG 4586 protocol used in the military are compared/analyzed in detail to find elements to complement each other and to draw improvement measures for protocol unification.

• International Journal of Aeronautical and Space Sciences
• /
• 제7권2호
• /
• pp.145-154
• /
• 2006

Many kinds of unmanned aerial vehicles (UAVs) have been developed for a few decades and some of them are now in operational use. Although each UAV as well as a piloted aircraft might have restrictions to execute some tasks simultaneously or to carry some payloads, one with an automatic chase aircraft might have the potential of multi-capabilities to conduct a variety of missions or to carry more storages. This paper introduces a chase UAV control system to enhance a leader (reference) aircraft capability which has storage restriction. The automatic chase guidance and control system will be introduced with the pure pursuit guidance law combined with relative velocity error corrections, and a dynamic inversion technique in order to generate the guidance forces.

• 한국항공운항학회지
• /
• 제32권1호
• /
• pp.1-9
• /
• 2024

The unmanned aerial vehicle industry has developed a lot, but the possibility of accidents is increasing due to potential risks. In this study, SHELL models and HFACS were used to analyze unmanned aerial vehicle accidents in the UK and to identify the main causes and characteristics of accidents. The main cause analyzed by the SHELL model was identified as an abnormality in the alarm system. The main cause of the accident analyzed by HFACS was identified as the technical environment. The common cause identified by the SHELL model and HFACS was identified as a mechanical problem of unmanned aerial vehicles. This is due to the lack of accurate information or functionality of the alarm system in the operator interface, which often prevents the operator from responding to sensitive information. Therefore, in order to prevent civil UAV accidents, the stability and reliability of the system must be secured through regular inspections of the UAV system and continuous software updates. In addition, an ergonomic approach considering human interfaces is needed when developing technologies.