• The Journal of Korea Robotics Society
• /
• v.17 no.3
• /
• pp.288-295
• /
• 2022

This study shows a system identification method of a balancing loading device for a stair climbing delivery robot. The balancing loading device is designed as a 2-axes gimbal structure and is interpreted as two independent pendulum structures for simplifying. The loading device's properties such as mass, moment of inertia, and position of the center of gravity are changeable for luggage. The system identification process of the loading device is required, and the controller should be optimized for the system in real-time. In this study, the system identification method is based on least squares method to estimate the unknown parameters of the loading device's dynamic equation. It estimates the unknown parameters by calculating them that minimize the error function between the real system's motion and the estimated system's motion. This study improves the accuracy of parameter estimation using a null space solution. The null space solution can produce the correct parameters by adjusting the parameter's relative sizes. The proposed system identification method is verified by the simulation to determine how close the estimated unknown parameters are to the real parameters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5B
• /
• pp.381-387
• /
• 2003

The importance of protection for data and information is increasing by the rapid development of information communication and network. And concern of the private-information protection is increasing for the requested user's demand. Analysis of unknown signal characteristics is importance for the safe system maintenance from hacker and cracker. Detected target of unknown signals is virus, inner invader and outer invader, etc. Because existed unknown signal detection method exist individually for the virus, inner invader and outer invader system performance is very lower and system cost is very much. Therefore, in this paper proposed merging IDS system performs detection for virus, inner intrusion and outer intrusion method. Design of the proposed system is used Synopsys Ver. 1999.10 and VHDL coding. The proposed IDS system is practical in the system performance and cost for the individually existed IDS, and proposed IDS system utilized a part of system resources.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.16 no.2
• /
• pp.140-146
• /
• 2016

This paper proposes a control method of the Segway with unknown control coefficient and input saturation. To design a simple controller for the Segway with the model uncertainty, the prescribed performance function is used. Furthermore, an auxiliary variable is introduced to deal with unknown time-varying control coefficient and input saturation problem. Due to the auxiliary variable, function approximators are not used in this paper although all model uncertainties are unknown. Thus, the controller can be simple. From the Lyapunov stability theory, it is proved that all errors of the proposed control system remain within the prescribed performance bounds. Finally, the simulation results are presented to demonstrate the performance of the proposed scheme.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.10
• /
• pp.1844-1851
• /
• 2007

This paper presents methods for the compensation of sinusoidal disturbances with unknown amplitude, phase, and time-varying frequency in nonlinear systems. In the previous disturbance accommodation methods, the sinusoidal disturbance with unknown time-invariant frequency was considered. In the proposed method, the disturbance with unknown time-varying frequency is compensated. As for the control structure, two control inputs are designed separately in such a way that one of them is designed for the nonlinear system control without considering the disturbance, and the other one uses the disturbance estimate obtained from the disturbance accommodating observer. The stability analysis is done considering the disturbance estimation error and the numerical simulation demonstrates the proposed approach.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.1
• /
• pp.5-11
• /
• 2010

An adaptive formation control approach is proposed for nonhonolomic multiple mobile robots considering unknown slipping and skidding. It is assumed that unknown slipping and skidding effects are bounded by unknown constants. Under this assumption, the adaptive technique is employed to estimate the bounds of unknown slipping and skidding effects of each mobile robot. To deal with the skidding effect included in kinematics, the dynamic surface design approach is applied to design a local controller for each mobile robot. Using Lyapunov stability theorem, the adaptation laws for tuning bounds of slipping and skidding are induced and it is proved that all signals of the closed-loop system are bounded and the tracking errors and the synchronization errors of the path parameters converge to an adjustable neighborhood of the origin. Finally, simulation results are provided to verify the effectiveness of the proposed approach.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.487-492
• /
• 2002

In this paper, we proposed a control method of an unknown nonlinear system using a dynamical neural network. The proposed method is composed of neural network of state space model type, performs for a unknown nonlinear system, identification with using the dynamical neural network, and then a nonlinear adaptive controller is designed with these identified informations. In order to verify the effectiveness of the proposed method, we simulated one-link manipulator. The simulation results showed the effectiveness of using the dynamical neural network in the adaptive control of one-link manipulator.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.7
• /
• pp.605-613
• /
• 2001

In this paper, we design a robust adaptive controller for a nonlinear system with uncertainties to be rejected via disturbance adaptation law. The nonlinear system considered has unknown nonlinear functions being influenced by external disturbance. The upper bound of unknown nonlinear functions at each time is estimated by using a disturbance adaptation law. The estimated nonlinear functions are used to design a stabilizing function a control input. Tuning function is used to estimates unknown system parameter without overparametrization. A set-point regulation error converges to a residual set close to zero asymptotically. The effectiveness of the proposed controller is investigated by computer simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.20-25
• /
• 1998

This paper proposes a new compliant contact control strategy for the robot manipulators accidentally interacting with an unknown environment. The main features of the proposed method are summarized as follows: First, each entry in the diagonal stiffness matrix corresponding to the task coordinate in Cartesian space is adaptively adjusted during con-tact along the corresponding axis based on the contact force with its environment. Second, it can be used for both unconstrained and constrained motions without any switching mechanism which often causes undesirable instability and/or vibrational motion of the end effector. Third, the adjusted stiffness gains are automatically recovered to initially specified stiffness gains when the task is changed from constrained motion to unconstrained motion. The simulation results show the effectiveness of the proposed method by employing a two-link direct drive manipulator interacting with an unknown environment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.12
• /
• pp.1031-1035
• /
• 2001

In this paper, a robust recursive control approach for nonlinear system, which is based on Lyapunov stability, is proposed. The proposed method can apply to extended systems including cascaded systems and the stability is guaranteed in the sense of Lyapunov. The recursive design procedure so called “robust recursive control approach” is used to find a stabilizing robust controller and simultaneously estimate the uncertainty parameters. First, a nonlinear model with uncertainties whose bounds are unknown is derived. Then, unknown bounds of uncertainties are estimated. By using these estimates, the stabilizing robust controller is updated at each step. This approach is applied to the pitch autopilot design of a nonlinear missile system and simulation results indicate good performance.

• Wind and Structures
• /
• v.17 no.4
• /
• pp.451-464
• /
• 2013

This study develops an extended inverse input estimation algorithm with intelligent adaptive fuzzy weighting to effectively estimate the unknown input wind load of nonlinear structural systems. This algorithm combines the extended Kalman filter and recursive least squares estimator with intelligent adaptive fuzzy weighting. This study investigated the unknown input wind load applied on a tower structural system. Nonlinear characteristics will exist in various structural systems. The nonlinear characteristics are particularly more obvious when applying larger input wind load. Numerical simulation cases involving different input wind load types are studied in this paper. The simulation results verify the nonlinear characteristics of the structural system. This algorithm is effective in estimating unknown input wind loads.