• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.73-79
• /
• 2017

Rapidly expanding population in the Kingdom of Saudi Arabia has a massive impact to put pressure on the shortage of housing and existing infrastructure. With average population growth rate of 1,9% yearly, the population in Saudi Arabia is projected to increase from 31 million in 2015 to 37 million in 2025. According to the housing ministry, Saudi Arabia needs to provide 3.3 million units to meet the demand in 2025, which is about 300,000 unit a year. In the past 40 years, using the conventional construction method, the Saudi construction industry was only able to build about 150,000 units per year. To meet the demand gap for the housing shortage, a new approach and innovation in construction methods are needed. Industrialized construction as an approach in construction methods has been studied and implemented in some countries that experienced similar corncerns. Industrialized construction can be defined as the implementation of manufacturing methods to construction-related activities to improve quality, reduce cost and project duration. Compared to the conventional construction method, prefabrication as industrialized construction methods has reduced construction labor on-site by 9.5%, construction project duration by 20%, and construction waste by 56%. It improves the quality, durability and cost saving not only for construction project owners, but also construction contractors. This paper discusses the possibility of 'industrialization' of building system in the Kingdom of Saudi Arabia as a solution for the housing shortage. It is an initial part of a study aims to develop a framework to develop industrialized building system in the Kingdom of Saudi Arabia. The is paper based on extensive literature review and case studies.

• 한국실내디자인학회논문집
• /
• 제21권2호
• /
• pp.215-222
• /
• 2012

Design-build is expanding gradually in large construction projects over 10billion won, and continue to work in health care facilities is increasing in this way. This constructional method in health care facilities, despite the many advantages, many problems caused by design changes are being raised. Raises the question of design changes on the side of construction contract, such as approval systems have been studied in the field of construction. The purpose of this study design in aspects of architectural planning on changing the grasp of the issues outlined in the ITB and bid evaluation criteria through consideration of the basic plan for improvement guidelines and evaluation criteria is presented. In conclusion, Design build, according to the presence of existing users are more likely to lead to design changes. Thus, hospital architecture, depending on how it is considered that constructional methods. And evaluation items of ITB(Invitation To Bidder) for a large part of the change in the variables evaluated in the hospital building is not suitable for the design build. Instead, the overall shape of the building and department, unit type and size, vertical and horizontal parts of the circulation system in the shape of the building that does not change in structure and etc should be considered for evaluation.

• 한국조경학회지
• /
• 제32권6호
• /
• pp.36-51
• /
• 2005

The purpose of this thesis is to analyse modem urbanization process and the morphological transformation of the urban tissues in Kunsan between the you 1899 and 2001, The method of this study is to investigate the transformation process of morphological elements such as plot structure, building layout, building facades, land use, exterior space structure and their use, with actual field surveys, the analysis of land registration maps in 1912, and various topological map. Morphological analysis on modern Kunsan is progressed by three steps-typo-morphological analysis of urban tissue in old-town area, interpretation of morphological process, and transformation process, of morphological structure in Japanese concession in view of plots system. As a result, it is found that there is cyclical relationship among the morphological transformation processes of morphological elements, plots, buildings, land-uses, and access space to buildings. From the view of town plan change, the period of restoration of war damage in 1950s and compressive growing period in 1960s have important meaning in the morphological process of old-town area. Particularly the first building plan and layout type together with plot form and structure is acted as the main factor to decide the subsequent plot transformation system, exterior space system and the particular streetscape in Kunsan.

• 건축역사연구
• /
• 제9권3호
• /
• pp.51-69
• /
• 2000

This study tries to analyze the development of architectural technologies appeared in several tall buildings and large spatial structures from 1955 to 1999 in Korea. We suppose that these buildings represent the development of technology in Korean modern architecture. By the detailed analysis of these buildings, we can arrive at a conclusion as such; During the years 1955-1999, there existed a great changement in the eighties. We can find this fact very well in the domain of structural system and curtain wall system. In large spatial structures, the structural-system of shell and steel truss dome was replaced by that of space frame, space truss and cable truss with membrane. In tall building, the structural system of rigid frame and shear wall was replaced by tubular system, core and outrigger system. Korean architects introduced the aluminum curtain wall in the sixties, but its low technological level caused many problems in reality. Therefore, precast concrete curtain wall appeared from seventies as the main method for an outer wall in tall building. With the augmentation of height after 1980, PC curtain wall was replaced by the aluminum curtain wall of unit type and structural glass wall system. These systems help to stress the transparency in a tall building.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.369-373
• /
• 2006

본 연구는 3차원 도시 모델링을 위해 라이브러리 기반의 texture mapping 기법을 사용하여 건물 모델을 제작하였다. 이 기법은 건물의 종류 및 특성에 따라 라이브러리 형태로 구축되어있는 texture map을 선택, 출력하여 3차원 건물 프레임에 mapping하는 과정으로 이루어진다. 이 기법의 효과적인 적용을 위해 LiDAR 데이터를 이용하여 건물을 자동적으로 분류하였고, LiDAR 데이터와 수치지도를 이용하여 단위 모델 구현을 위한 건물의 3차원 프레임을 제작하였다. 또한 사실감 있는 건물 texture를 구현하기 위해 실제 건물의 지상사진을 이용하여 texture map 라이브러리를 구축하였다.

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.109-119
• /
• 2004

Rapid prototyping (RP) technologies have been widely used to reduce the lead-time and development cost of new products. $VLM-_{ST}$ process has been developed to overcome the currently developed RP technologies such as a large building time, a high building cost, an additional post-processing and a large apparatus cost. $VLM-_{ST}$ process requires an additional human interaction due to the manual stacking and bonding. Hence, building time, building cost and the part quality are dependent on the skill of labor. A novel RP process, fully automated $VLM-_{ST}$ process ($VLM-_{ST}$), has been developed to improve building efficiency of the process and the human dependency of the part. The objective of this work is to propose a $VLM-_{ST}$ process and to develop an apparatus for implementation of the process. $VLM-_{ST}$ process and its apparatus have various technical novelties such as two step cutting using a rotating table, an automatic stacking method using two pilot holes and two reference shapes, a concept of automatic unit shape layer (AUSL), and an automatic bonding using the bonding roller and building magazine. In order to examine the efficiency and the applicability of the proposed process, various three-dimensional shapes, such as a piston, a human head shape and a human bust shape, were fabricated on the apparatus.

• 패션비즈니스
• /
• 제20권3호
• /
• pp.30-42
• /
• 2016

The objective of this study was to perform 3D solid modeling from 3D scanned surface images of cotton and silk in order to calculate the thermal heat transfer responses using numerical simulations. Continuing from the previous methodology, which provided 3D surface data for a fabric through optical measurements of the fabric microstructure, a simplified 3D solid model, containing a defined unit cell, pattern unit and fabric structure, was prepared. The loft method was used for 3D solid-model generation, and heat transfer calculations, made for the fabric, were then carried out using the 3D solid model. As a result, comprehensive protocols for 3D solid-model generation were established based on the optical measurements of real fabric samples. This method provides an effective means of using 3D information for building 3D models of actual fabrics and applying the model in numerical simulations. The developed process can be used as the basis for other analogous research areas to investigate the physical characteristics of any fabrics.

• 전자공학회논문지
• /
• 제51권10호
• /
• pp.223-227
• /
• 2014

본 논문은 인체 감지 센서 모듈 및 그에 의한 관리 시스템의 구현 및 개선 방안에 관한 것으로, 구체적으로는 초음파 센서에 의하여 화장실 변기의 사용 여부를 탐지하는 인체 감지 센서 모듈과 각각의 화장실에 설치된 인체 감지 센서 모듈을 이용하여 건물 전체의 화장실의 상태를 제어할 수 있도록 하는 관리 시스템에 관한 것이다. 제안된 인체 감지 센서 모듈은 인체의 이동 여부를 탐지하는 탐지 센서, 변기로부터 일정 거리에 위치하는 인체를 탐지하는 것에 의하여 변기의 사용 여부를 감지하는 접촉 센서로 구성되고, 관리 시스템은 탐지 센서와 접촉 센서로부터 전송된 신호를 처리하는 제어 유닛, 탐지 센서와 접촉 센서로부터 전달된 신호의 처리에 따라 개폐가 제어되는 전자 개폐 밸브 및 작동 상태에 대한 정보를 저장하고 일정 주기로 전송하는 근거리 무선 통신 유닛을 포함한다.

• 전자공학회논문지CI
• /
• 제47권5호
• /
• pp.25-34
• /
• 2010

스타이너 포인트들을 추가하여 모든 입력 노드들을 최단 길이로 연결하는 스타이너 최소 트리는 최소 신장 트리에 비해 전체 길이는 짧으나, 그것을 생성하는 문제는 NP-Complete 영역에 속한다. 이 문제를 위한 휴리스틱들은, 입력 노드의 수가 매우 큰 경우에는 많은 시간과 계산을 요구한다. 본 논문에서는 많은 입력 노드에 대해, 최하위 계층에서 포탈을 이용한 모든 가능한 단위 스타이너 트리들을 생성하고 각 상위 계층에서 이들을 계층별 병합 처리하여 최상위 계층에서 최소 비용의 트리를 선택하는 효과적인 PTAS 기법을 제안한다. 16,000개의 입력 노드와 최하위 계층에서 16개의 단위 영역으로 설계된 실험에서 생성된 PTAS 스타이너 트리는, pure 스타이너 트리의 길이에 비해 길이가 0.24% 증가되었으나, 생성 시간은 직렬 처리는 85.4%, 병렬처리는 98.9% 개선되었다. 따라서 제안하는 PTAS 스타이너 트리 생성 기법은 많은 입력 노드들에 대해 근사 스타이너 트리를 신속히 생성하는 응용에 잘 적용될 수 있을 것이다.

• 한국건축시공학회지
• /
• 제9권1호
• /
• pp.65-73
• /
• 2009

Looking at current construction costs estimations of publicly declared public works, there are many instances where estimation criteria are ambiguous and doesn't imply the reality. Up to date, estimation criteria for calculating construction cost estimations are simply by unit area multiplication and stochastic construction cost estimation. However, possibility of making errors are high due to using uniform data that excludes each public work's specifications and environmental conditions. Further, on the aspect of cost management, there is certain limitation in the efficiency of cost management in order-placing stage and commencing-work stage; while efficient cost management and reduction of expenses are highly possible during initial stages of the project. In this respect, the paper adopts positive approach with regards to construction cost estimations of public works and draws common elements from calculation tables of the construction cost estimations from 3 completed domestic construction works; after which, the paper analyzes whether business exposition, construction guide and publicly-declared estimated construction costs that the orderer issued are calculated economically and properly; deducing problems in the process, the paper seeks to recommend rational calculation method on this.