• Journal of Korean Society for Geospatial Information Science
• /
• v.25 no.1
• /
• pp.55-61
• /
• 2017

The V-world, korean type spatial information open platform, provides various services to easily utilize 2D, 3D map and administrative information of the country. Among them, V-world 3D map service, modeled in individual building unit, require requests for each building model file and the draw calls for drawing models on the screen by the request. This causes a large number of model requests and draw calls to occur that increase the latency occurring during the transmission and conversion process between the central processing unit(CPU) and the graphic processing unit(GPU), which lead to the performance degradation of the 3D map service. In this paper, we propose a performance improvement plan to reduce the performance degradation of 3D map service caused by multiple model requests and draw calls. Therefore, we tried to reduce the number of requests and draw calls for the model file by applying a 3D tile model that combined multiple building models to single tile. In addition, we applied the quadtree algorithm to reduce the time required to load the model file by shortening the retrieval time of the model. This is expected to contribute to improving the performance of 3D map service of V-world.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.2
• /
• pp.147-153
• /
• 2020

It is important to estimate the optimal construction cost at the early stage of the project. In this regard, conceptual cost estimate is an important factor for estimate optimal construction cost. However, domestic conceptual cost estimate are only used as cost per unit area according to the building type, and it's accuracy is not high. Hence, the purpose of this study is to calculate the approximate quantity and cost for reinforcing bars, concrete, and formwork by presenting a regression formula based on the total floor area of the common work items in the frame work. In order to verify the accuracy and validity of the regression formula presented in this study, a comparative analysis was performed by applying the regression formula and the traditional approximate quantity take-off method to real cases. As a result, the estimated error rate of the traditional method was -102~+55%, and exceeded the estimated conceptual cost estimate accuracy range of -50~+100% suggested by AACE(American Association of Cost Engineering). On the other hand, the error rate of the regression formula method presented in this study was -6.4~+11.62%. This can be used not only for conceptual cost estimate range of accuracy, but also for detailed estimates. However, it is necessary to analyze the factors that affect the unit price as well as quantity in order to calculate the appropriate cost.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.2
• /
• pp.67-76
• /
• 2012

BIM and its quantity take-off widely apply to the construction projects and LCCO2 Assessment using the BIM's quantity take-off function can be tried recently. Because BIM modeling programs such as Revit and ArchiCAD do not provide adequate library for LCCO2 Assessment, quantity take-off data should be conversed and applied to Carbon Emission Coefficient using Excel program or manual work. Therefore, the purpose of this research is 1) to propose the Unit Conversion Systems for Carbon Emission Coefficient, 2) to provide basic library sets for BIM based LCCO2 Assessment method, and 3) to apply 11 material library sets on a apartment unit plan modeling to pursue the CO2 emission evaluation of the material production in the process of LCCO2 Assessment. Research results showed CO2 emission amount of 458.64kgCO2/m2 from the apartment unit plan modeling.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2011.04a
• /
• pp.75-80
• /
• 2011

The Ministry of Land, Transport and Maritime Affairs has announced a policy which could enable the building of urban type housing using a prefabrication method in 2010. However, it may possibly be at standstill owing to the prefabrication methodology has not been currently developed in Korea. Moreover, small households of one or two family members are been steadily increasing, but small housing in which they reside has been decreasing. Because of this situation, the urban type housing has been proposed. To expand the propagation of this urban type house and to promote the prefabrication method, the first-priority project is to develop a technology that is able to reduce the construction costs, as well as to shorten the construction period. Considering this prefabrication system as an avenue to be able to solve these problems, a series of systems and policies for fostering prefabricated urban type housing has been proposed. This study is to review a series of methods, technologies and policies that are required for urban type housing and henceforth, to utilize them as preliminary data for prefabricated urban type housing.

• Journal of the Korean Society of Earth Science Education
• /
• v.3 no.3
• /
• pp.163-174
• /
• 2010

The purpose of this study is to device the teaching-learning method and the evaluating method on 'free inquiry' which is newly introduced in 2007 revised curriculum. The teaching-learning models which apply 'free inquiry' are 'group investigation', 'PBL', 'project investigation' and 'IIM'. And the unit which apply 'free inquiry' on the fourth grade and the second semester in the elementary science. The results of this study are as follows: First, The person leading the lesson is not a teacher but learners. The focus of teaching-learning is not a unit but topic, problem or project on the science textbook. A teacher's role is not the deliverer of knowledge but the guide of learning. Second, the outcome of applying group investigation, PBL project investigation and IIM to 'free inquiry' is improvements of the problem-solving ability and the self-directed learning ability as well as building scientific attitude and social skills as educational effect in commonly. Third, to apply 'free inquiry' efficiently, teachers should understand each subject very well, teach a class with a thorough and concrete plan, and try to evaluate objectively.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.5
• /
• pp.450-457
• /
• 2004

In this research, the automatic synthesis of knowledge models is proposed. which are the basis of the methods using qualitative models adapted widely in fault diagnosis and hazard evaluation of chemical processes. To provide an easy and fast way to construct accurate causal model of the target process, the Role-Behavior modeling method is developed to represent the knowledge of modularized process units. In this modeling method, Fault-Behavior model and Structure-Role model present the relationship of the internal behaviors and faults in the process units and the relationship between process units respectively. Through the multiple modeling techniques, the knowledge is separated into what is independent of process and dependent on process to provide the extensibility and portability in model building, and possibility in the automatic synthesis. By taking advantage of the Role-Behavior Model, an algorithm is proposed to synthesize the plant-wide causal model, Fault-Causality Graph (FCG) from specific Fault-Behavior models of the each unit process, which are derived from generic Fault-Behavior models and Structure-Role model. To validate the proposed modeling method and algorithm, a system for building FCG model is developed on G2, an expert system development tool. Case study such as CSTR with recycle using the developed system showed that the proposed method and algorithm were remarkably effective in synthesizing the causal knowledge models for diagnosis of chemical processes.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.115-117
• /
• 2012

Task based modeling is essential in a construction operation simulation modeling. It allows dealing with local variables or delay factors that affect productivity and improves the reusability of existing operation models. An operation model can secure reality only if it reflects the real construction processes by effectively dealing with zoning issue. However, system users have some difficulties in modeling a construction operation that is consisted of several processes having different production units. Zoning is a major modeling issue when the task based modeling method is implemented using the existing discrete event simulation systems. This paper highlights the difficulty and presents a new method that complements the zoning issues attributed to different production units. The method is described in detail by presenting the flow of entities. It is confirmed that the zoning method effectively deals with the unbalance of production units between processes and facilitates to model an operation model having processes with different production units. The "Zoning module" contributes to increasing accuracy of simulation result.

• Journal of the Korean Geographical Society
• /
• v.41 no.2 s.113
• /
• pp.188-194
• /
• 2006

Three-dimensional topological data is essential for 3D modeling and application such as emergency management and 3D network analysis. This paper reviewed current 3D topological data model and developed a method to construct 3D topological node-relation data structure from 2D computer aided design (CAD) data. The method needed two steps with medial axis-transformation and topological node-relation algorithms. Using a medial-axis transformation algorithm, the first step is to extract skeleton from wall data that was drawn polygon or double line in a CAD data. The second step is to build a topological node-relation structure by converting rooms to nodes and the relations between rooms to links. So, links represent adjacency and connectivity between nodes (rooms). As a result, with the conversion method 3D topological data for micro-level sub-unit of each building can be easily constructed from CAD data that are commonly used to design a building as a blueprint.

• Journal of the Korean housing association
• /
• v.23 no.3
• /
• pp.53-61
• /
• 2012

Openness to outside is one of the most critical advantages for high-rise buildings. However, the effect of openness can be decreased if it is blocked by other high-rise buildings, especially built within the building complex of commercial district. The purpose of this study is to identify the horizontal openness of high-rise residential buildings by comparing 3 different cases of building arrangement type. A new method of evaluation has been introduced on the basis of distance to measure the openness including the matter of securing privacy. As a result of this study, comparative analysis was possible and relatively plentiful results of analysis could be drawn out. Through the process of analysis, this study set the evaluation indicators suitable to the analysis of openness of unit households. Thereby, the results of this study are expected to be used as useful basic data in planning high-rise mixed-use buildings.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.6
• /
• pp.539-547
• /
• 2019

Recently, the international community signed a climate change agreement to prevent global warming. Yet currently, the fossil fuels have been widely used in to supply building energy for cooling and heating. The Green Building certification (G-SEED), an energy efficiency rating for new or existing buildings requires that buildings meet certain conditions. Insulation is used as a building material to reduce the energy supply to buildings and to improve the thermal insulation, and it accounts for more than 90% of the total heat resistance provided by the building surface components that meet the energy-saving design standards of new buildings. In this investigation, a performance evaluation study was conducted through an experimental study by directly extracting the foam polystyrene insulation on-site during the remodeling of a building that was in the range of 22~38 years old. Through tests, it was found that the thermal conductivity of the extrusion method insulation (XPS) was reduced by 48% and the compressive strength of XPS decreased by 36% compared to KS M 3808, which is the initial quality standard. For bead method insulation (EPS) with a thickness of 50mm, the thermal conductivity, the compressive strength, and flexural failure load were similar to the initial quality standard. Therefore, in the calculation of the primary energy requirement per unit area per year, the performance of bead method insulation can be estimated simply by considering the thickness of the insulation, while a correction factor that considers its performance deterioration should be applied when extrusion method insulation is used.