• 제목/요약/키워드: Unit Volume Weight

검색결과 193건 처리시간 0.026초

Ti염 및 Fe염으로 화학처리된 염색공단 슬러지를 재활용한 인공경량골재의 물리적 특성에 관한 연구 (Study on the Physical Properties of the Artificial Lightweight Aggregate Recycled from the Dyestuff Sludge Treated Chemically With Ti and Fe Salt)

  • 최종오;정용욱
    • 한국건설순환자원학회논문집
    • /
    • 제3권1호
    • /
    • pp.34-42
    • /
    • 2015
  • 본 연구는 단순매립 및 소각처리 되고 있는 염색공단 슬러지의 재활용을 목적으로 Ti염과 Fe염으로 화학 처리된 염색공단 슬러지를 이용하여 인공경량골재를 제조하고, 인공경량골재로의 활용성 검토를 위하여 골재의 물리적 특성과 환경유해성 등을 평가하였다. 인공경량골재 제조는 점결제로 점토를 이용하여 점토와 슬러지 배합비율에 따른 성형성을 평가하여 최적 함수량을 선정하고, 최적 배합비를 기준으로 둥근 모양의 형태로 가공한 후 건조과정과 2단계의 소성과정을 거쳐 제조하였다. 제조된 경량골재는 KS F 2534 "구조용 경량 골재"를 기준으로 인공경량골재의 입도 및 조립률, 밀도 및 흡수율, 단위용적질량, 안정성 및 환경유해성 등을 평가하였다. 실험 결과 입도와 조립률에서 기준 범위를 일부 벗어났으나 다른 모든 물리적 특성은 기준 값을 모두 만족하는 것으로 나타났으며, 입도와 조립률도 향후 제조공정에서 충분히 해결할 수 있는 것을 확인할 수 있었다.

인천항의 수출 적컨테이너화물 물동량 추정에 관한 연구 (Forecasting Export Loaded Container Throughput of Incheon Port)

  • 고용기;김은지;신정용;김태호
    • 한국항만경제학회지
    • /
    • 제24권3호
    • /
    • pp.57-77
    • /
    • 2008
  • 본 연구에서는 기존의 물동량 전망에 적용한 방법론이 아닌 개별 항만별 예측방법을 적용하여 인천항에서 경유하는 수출 화물 물동량을 전망하였다. 물동량 전망에 있어 기존의 통계적, 계량경제학적인 분석 대신 시스템 분석을 적용하였다. 대부분의 기존연구에서 적용하였던 총량적 접근방법은 전국의 총 화물물동량을 각 품목별 특성에 따른 계량모형을 통해 추정한다. 이는 전국권역을 기반으로 항만 O/D에 따라 향후 권역별 항만 개발계획 및 개별입지변화를 반영하여 체계적인 방법으로 배분함으로써 전국 항만의 물동량을 도출했다. 본 연구에서는 이러한 기존방법론이 아닌 개별항만의 주변상창이나 직접적인 영향을 미치는 산업단지의 현황을 토대로 물동량을 도출해 내는 방법이다. 본 연구에 있어 기초자료는 인천항을 배후권역으로 하는 수출 화물의 기종점인 배후산업단지의 소요면적에 대한 자료를 토대로 조사하였다. 이는 수출의 대부분을 창출하는 산업단지의 소요면적을 파악하여 이에 원단위를 적용함으로써 산단별 입출되는 물량을 도출할 수 있다. 여기에 산단별 분양률, 업종비중, 가동률, 그리고 산단별 수출 비중을 적용하여 인천항의 수출 화물 물동량을 전망하였다. 본 연구는 기존의 전망치와 비교를 함으로써 연구방법론의 다양화와 비교연구를 수행하는 연구성과를 거두었다.

  • PDF

학령전 아동의 Sodium 과 Potassium 의 식이량 및 대사에 관한 연구 (A Study on Sodium and Potassium Intakes and their Metabolisms of Preschool Children in Seoul Area)

  • 이기열
    • Journal of Nutrition and Health
    • /
    • 제20권1호
    • /
    • pp.25-37
    • /
    • 1987
  • The purpose of this study was to estimate the sodium and potassium intakes and their metabolisms of preschool children, and to evaluate the relationship between the blood pressure and the related variables. The subjects consisted of ninety-five preschool children aged two to six years (male 57, female 38). Twenty-four hour urines of subjects were collected for the measurements of their volume, sodium, potassium, creatinine and urea nitrogen. At the same time, the questionnaire was designed to assess the sodium and potassium intakes. The' results obtained were as follows; 1) The urinary excretion of sodium in 24 hours was 54.6$\pm$22.4mEq(orI255.8mg)and dietary sodium intake was 2147.0$\pm$518.4mg. The dietary sodium intake significantly increased with increasing age(p=O.0151). However, daily sodium intake per unit body surface area did not show significant difference by age. 2)The urinary excretion of potassium in 24 hours was 14.2$\pm$7.6 mEq (or 555.2mg) and the potassium intake was 1133.8mg. 3) The urinary excretions of creatinine and urea nitrogen were 240.2$\pm$126.2mg and 2946.7$\pm$1693.9mg, respectively. 4) The principal food SOUTce of sodium intake was the seasoning group, which con\ulcornertributed 49.9% to total sodium intake. 5) The main food source of potassium intake was milk and milk products; from which 28.6% of total potassium intake was obtained. 6) The blood pressure showed highly positive correlations with height, weight and body surface area (p$\leq$O.OOl) . In addition, the blood pressure was found to be correlat\ulcornered with urinary sodium excetion and dietary sodium intake (p$\leq$O.Ol).

  • PDF

Polycarboxylate에 혼합 사용된 혼화제의 조기강도 발현성상에 관한 연구 (A Study on the Strength at an Early Stage of the Compound Mixed into Polycarboxylate)

  • 류현기
    • 한국건축시공학회지
    • /
    • 제9권6호
    • /
    • pp.175-181
    • /
    • 2009
  • 본 연구에서는 폴리카본산계에 혼합 사용된 혼화제의 혼입율 변화에 따른 조강용 혼화제로서의 실무에서의 활용가능성 여부를 판단하고자한 실험연구 결과이다. 유동성은 만족하는 경향으로 나타났으며, 공기량은 KS규정보다 다소 작고 단위용적질량은 만족하는 것으로 나타났다. 블리딩 량은 B2가 가장 적게 나타났고, 응결시간은 A1, B1, C1에서 초결 및 종결이 빠르게 나타났다. 경화 콘크리트의 특성으로 조기재령의 압축강도 발형 경향은 7일 재령에서 C2의 모든 첨가율이 가장 높은 강도 값을 나타내었고 그 중 1.3%의 첨가율이 가장 큰 강도 발현경향을 나타내었다. 인장강도 역시 압축강도에 비해 약 1/10정도의 강도 발현율을 나타내고 있다. 건조 수축에 의한 길이 변화율은 양호한 편으로 나타났는데, 적당한 AE공기 연행제를 사용하면 실무에서 매우 유용한 혼화제로써의 사용이 가능할 것으로 판단된다.

열경화성 에폭시 기지의 흡습탄성 거동에 관한 분자동역학 전산모사 (A Molecular Dynamics Simulation Study on Hygroelastic behavior of Thermosetting Epoxy)

  • 권선영;이만영;양승화
    • Composites Research
    • /
    • 제30권6호
    • /
    • pp.371-378
    • /
    • 2017
  • 본 연구에서는 대표적인 열경화성 재료인 에폭시 기지의 흡습탄성 거동을 예측하기 위해 분자동역학 전산모사를수행하였다. 고분자 복합재가 오랜 시간 동안 흡습환경에 지속적으로 노출될 경우, 거시적 물성의 저하가 발생하기 때문에 복합재의 내구설계 측면에 있어 흡습노화 현상에 대해 분자스케일적으로 접근하는 방법은 매우 중요하다. 본 연구에서는 $EPON862^{(R)}$ 수지와 아민계 Triethylenetetramine (TETA) 경화제로 비정질 에폭시 분자모델을 구성하였으며, 각각 30과 90%의 가교 상태에서 수분 흡수 유무에 따른 물성변화를 관찰하였다. 건조상태의 에폭시와 수분이 4 wt% 포함된 에폭시 단위셀에 대한 평형 및 비평형 앙상블 전산모사 과정을 통해, 에폭시의 수분팽창계수, 응력-변형률 선도 및 탄성계수 그리고 침투된 수분의 수지 내 확산계수를 예측하였다. 또한 흡습된 구조와 그에 따른 물성변화의 상관관계를 규명하기 위해, 자유체적 변화 및 흡습에 따른 에폭시 수지의 비결합 포텐셜 에너지 변화를 관찰하였다.

유리질중공미소구체를 사용한 콘크리트의 특성에 관한 실험적 연구 (An Experimental Study on the Property of the Concrete with Glass Hollow Micro Sphere)

  • 김상헌;김세환;박영신;전현규;서치호
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제18권3호
    • /
    • pp.160-166
    • /
    • 2014
  • 본 연구에서는 건축물의 외피를 통해 손실되는 냉난방 에너지를 감소시킬 수 있는 방안으로써, 구조용 콘크리트에 단열성능을 향상시킬 수 있는 할로마이크로스피어 (Hollow Micro Sphere, 이하 HMS)를 사용하였다. 중공구조의 마이크로 크기의 입자인 HMS를 사용한 콘크리트를 실험한 결과는 아래와 같다. HMS의 사용으로 인해 슬럼프에 감소가 나타나 고성능감수제의 사용이 필요할 것으로 판단된다. 공기량은 HMS의 치환율이 증가할수록 감소하는 경향을 보였으며, 압축강도는 HMS의 계면부착력이 형성되지 않는 것에 기인하여 치환율 증가에 따라 감소하는 것으로 나타났다. 열전도율과 단위용적질량은 치환율이 증가할수록 감소하였다. 열전도율은 보통콘크리트 약 30.0~46.5% 감소한 것으로 나타났다.

TSMA 방법을 이용한 순환 굵은골재 콘크리트의 기계적 성능 (Mechanical Properties of Recycled Coarse Aggregate concrete using Two-Stage Mixing Approach)

  • 권성준;임희섭;이한승;임명관
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제22권4호
    • /
    • pp.60-67
    • /
    • 2018
  • 본 논문은 콘크리트 배합 방식(NMA, TSMA1, TSMA2)에 따른 순환 굵은골재 치환량에 따른 콘크리트의 기계적 성능을 비교 평가하였다. 실험은 순환 굵은골재를 0%, 50%, 100%로 3수준으로 콘크리트의 배합 방식에 따라 실험을 진행하였다. 굳지 않은 콘크리트에서는 공기량, 슬럼프, 단위용적질량 실험을 진행하였으며, 경화 콘크리트에서는 압축강도 및 휨강도 시험을 진행하였다. 본 연구의 실험결과 NMA 방식과 비교하여 TSMA 방식에서 강도 저하가 나타나고 있음을 확인할 수 있었다. 하지만, 이는 순환 굵은골재가 다량 치환됨에 따른 것으로 사료된다. 순환 굵은골재가 다량 치환됨에 따라 슬럼프 증진, 공기량 증진, 강도 저하가 나타남을 확인하였다.

"규호시의방"의 정리학적 고찰 (A Study on the Book "Gwngonsiuebang")

  • 이효지
    • 대한가정학회지
    • /
    • 제19권2호
    • /
    • pp.189-198
    • /
    • 1981
  • The Gwugonsiuebang is a book of Korean woman's life in the Yi dynasty which published I 1653 by Mme. Jang. I have studied the food habits of the Yi dynasty that wrote in Gwugonsiueband as following. The staple foods are Guksu (wheat vemicell as like western noodles) 5, Mandu (bun stuffed with seasoned meat and vegetables) 6 kinds in this book. the side dishes are Guk (soup) 8, J'm (steamed meat or fish) 6, chae6, Nooruemi 5, Hyae (sliced raw fish) 3, Jockpyun (jellied beef soup) 3, Jockgall (salted sea food) 2, Jock (skewer or broach) 2, jihee 2, Sun (Steaming of stuffed vegetable) 1, Bockuem (saute) 1, Jon (pan fried fish) 1, Gui (meat or fish grilled with seasoning) 1, and the other 13 kinds. The desserts are D,ock (Korean rice cake) 11, jabgwa 8, Beverages 5 kinds and Jungwa 1 kind. The alcohol and fruits wine are 51 kinds. The alcohol and fruits wine are 51 kinds. The seasonings are Soybean sauce, oil, Sesamol oil, pepper, Ginger, Garlic, Vinegar, Wine, Salt, Bean paste etc. Raw materials of Guksu, Mandu, D'ock, Jabgwa, Beverage, Wine, vinegar are all carbohydrates. It shows that a tendency of Korean people too much take a carbohydrates. Now and then, there are no special difference of winter over pass for vegetables, fruits, dried beef, dried fish and salt fishes. In yi dynasty, there are 62 kinds of table ware and cooking kitchen utensils, but many of them come to uselessness. 19 kinds of measuring unit are very non-scientific because that is not by weight but by bulk or volume. There are many food making terms which are 198 kinds of prepared cooking term, 11 kinds of cutting term and 20 kinds of boiling term. And 10 kinds of expression of taste can see this book.

  • PDF

유연탄 bottom ash의 경량 및 단열 특성 (Characteristics of Lightweight and Thermal Insulation of Bituminous Coal Bottom Ash)

  • 이종규;여운호
    • 유기물자원화
    • /
    • 제26권1호
    • /
    • pp.39-45
    • /
    • 2018
  • FA(Fly ash)에 대해서는 연구가 활발히 진행되는 반면 BA(Bottom ash)의 연구실적은 많지 않으며, 특히 BA 재활용 분야의 연구가 절실히 요구된다. 따라서 본 연구에서 다공성인 건식(공랭식) BA를 연구대상으로 선택해 이를 재료로 활용하여 만든 BA 모르터와 일반 모르터를 비교 분석하여 BA 모르터의 경량 및 단열 특성을 알아보고자 하였다. BA의 경량성을 알아보기 위해 밀도 시험, 단위용적질량 시험, SEM 시험을 하였으며, 단열 시험을 위해 BA 모르터와 일반 모르터 몰드를 KS A 0006에서 정한 상온 상습의 환경조건에서 제작 후 항량이 될 때까지 온도 $105{\pm}2^{\circ}C$에서 건조하였다. 경량성 시험 결과 BA 모르터의 경량성은 일반 모르터의 0.72배로 일반 모르터에 비해 약 30%정도 가볍게 측정되어 BA를 건축물 재료로 활용할 경우 건축물 하중을 줄이는데 크게 기여할 것이다. 또한 단열 시험 결과 BA 모르터의 열전도율은 일반 모르터의 0.70배로 약 30%정도 단열성이 우수하다.

수화열 발생인자가 지하철 콘크리트 구조물의 내구설계에 미치는 영향 (Effect of the factor developing the Heat of Hydration on Durability Design in the Subway Concrete Structure)

  • 임영수;김은겸;성기한
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2004년도 추계학술대회 논문집
    • /
    • pp.1131-1137
    • /
    • 2004
  • With the recent continuous expansion of subways, newly created subways tend to have lower locations and wider sections. Furthermore. since box structures and evacuating tunnels are classified into a category of mass-concrete. the thermal-stress, emitted from the inside. causes cracks to structures from the inception of constructing. In this paper, thermal-stress analysis and durability evaluation of box structure were carried out to investigate relationship between durability and parameter causing the heat of hydration. Through the examination, this paper tries to find out satisfactory solutions to regulated thermal crack and ensure the required duration period. The results of this paper showed that to control thermal crack and guarantee the required duration period it was more effective to use low-heat-portland cement and moderateheat-portland cement. As cement volume due to reduction of water-cement ratio increased, the possibility of thermal cracks occurrence increased but results of durability evaluation was different depending on evaluation method. The results showed that the appropriate water-cement ratio to control the heat of hydration and satisfy the required durability was $45\∼55\%$. And it was showed that during placement of concrete blocks ambient temperature affect the heat of hydration. thermal crack and long-term durability largely and when concrete was placed at low temperature to control thermal crack. it need to try to guarantee the required duration period. Henceforth, by studying not only internal and external conditions, such as the relative humidity and the unit weight. but also methods, to evaluate durability, in accordance with domestic situations, more reasonable design of durability should be achieved.

  • PDF