Journal of the Korean Recycled Construction Resources Institute (한국건설순환자원학회논문집)

Korean Recycled Construction Resources Institute (한국건설순환자원학회)
권호 표지
DOI QR코드

DOI QR Code

Study on the Physical Properties of the Artificial Lightweight Aggregate Recycled from the Dyestuff Sludge Treated Chemically With Ti and Fe Salt

Ti염 및 Fe염으로 화학처리된 염색공단 슬러지를 재활용한 인공경량골재의 물리적 특성에 관한 연구

  • 최종오 (계명대학교 토목공학과) ;
  • 정용욱 (계명대학교 첨단건설재료실험센터)
  • Received : 2015.03.04
  • Accepted : 2015.03.11
  • Published : 2015.03.30
Download PDF
⟨ Previous Next ⟩

Abstract

The paper investigates environmental hazards and characteristics of the artificial lightweight aggregate manufactured by using dyestuff sludge from dyeing industrial complex. The dyestuff sludge used in this study is chemically treated with Ti and Fe salt for the purpose of recycling. The artificial lightweight aggregate is manufactured through 3 step; 1) Selecting the optimum moisture content by evaluating plasticity from the mixing ratio of the clay and sludge, 2) shaping round type based on the optimum mixing ratio, 3) drying and Sintering process. Based on KS F 2534 "Lightweight Aggregate for Structural concrete", the particle size, fineness modulus, the density, absorption, unit volume weight, stability and environmental hazards of the manufactured lightweight aggregate are evaluated. Experimental results show that the particle size and fineness modulus is out of the range. However, it is observed that other physical properties are within criteria. In addition, it is confirmed that the problem of the particle size and fineness modulus could be solved in the manufacturing process.

본 연구는 단순매립 및 소각처리 되고 있는 염색공단 슬러지의 재활용을 목적으로 Ti염과 Fe염으로 화학 처리된 염색공단 슬러지를 이용하여 인공경량골재를 제조하고, 인공경량골재로의 활용성 검토를 위하여 골재의 물리적 특성과 환경유해성 등을 평가하였다. 인공경량골재 제조는 점결제로 점토를 이용하여 점토와 슬러지 배합비율에 따른 성형성을 평가하여 최적 함수량을 선정하고, 최적 배합비를 기준으로 둥근 모양의 형태로 가공한 후 건조과정과 2단계의 소성과정을 거쳐 제조하였다. 제조된 경량골재는 KS F 2534 "구조용 경량 골재"를 기준으로 인공경량골재의 입도 및 조립률, 밀도 및 흡수율, 단위용적질량, 안정성 및 환경유해성 등을 평가하였다. 실험 결과 입도와 조립률에서 기준 범위를 일부 벗어났으나 다른 모든 물리적 특성은 기준 값을 모두 만족하는 것으로 나타났으며, 입도와 조립률도 향후 제조공정에서 충분히 해결할 수 있는 것을 확인할 수 있었다.

Keywords

References

  1. Cho, J. K., Kim, H. J., & Park, Y. J. (2008). The Status and Task of Sewage Sludge Treatment. Korea Society Environmental Administration, 14(2), 73-82.
  2. Choi, B. W., Lee, J. M., Jung, Y. W., Oh, D. S., YUN, D. K., & Jang, S. S. (2013). A Study on Manufacture of Lightweight Aggregate for Reduction of Firing Temperature using Dyestuff Sludge. Journal of Korean Concrete Institute, 269-270.
  3. Ju, S. Y., & kim, K. Y. (2002). A Study on The Comparison of Leaching Methods and Stability of Cement Mortar
  4. Kim, D. M., Mun, K. J., & Soh, Y. S. (2005). Applicability of inorganic waste as binder at manufacturing of Light weight aggregates using high content sewage sludge. Journal of Korean Concrete Institute, 157-160.
  5. Kim, H. Y., & Bae, K. H. (2012). The Present Status and Suggestions for Wastewater Sludge Recycling. Journal of Nakdonggang Environmental Research Institute, 16(1), 235-240.
  6. Kim, I. G. (2005). The Solidification for Recycling as Landfills Cover material of Wastewater Sludge. Master's thesis, Kyungpook national University, Daegu.
  7. Korean Standards Association. (2009). KS F 2534 Lightweight aggregate for structural concrete. Seoul: Ministry of Knowledge Economy.
  8. Nam, Y. W., & Han, K. S. (2011). A Study on the Present State and Improvement Plan of Domestic Sewage Sludge Treatment. Korea Solid Wastes Engineering Society, 28(1), 103-109.
  9. Park, D. O., Sa, S. H., Kim, S. H., Ji, S. W., Choi, S. K., & Seo, C. H. (2009). A Study on the Properties of Lightweight Aggregate Concrete according to the Pore Structure and Water Absorption Characteristics of Lightweight Aggregate. Journal of the Architectural Institute of Korea, 25(3), 85-92.
  10. Seo, C. H., Ji, S. W., Lee, S. Y., Lee, J. S., & Lee, J. W. (2005). A Study on Application of Ready Mixed Concrete of ECO Lightweight Aggregate using Sewage Sludge. Journal of Korean Concrete Institute, 109-112.
  11. Solidified Cadmium sludge, Korean J. Sanitation, 17(3), 21-30.