• 소성∙가공
• /
• 제11권2호
• /
• pp.147-154
• /
• 2002

The tension levelling Process is Performed to elongate the strip plastically In combination of tensile and bending strain so that all longitudinal fibers In the strip have an approximately equal amount ofn length and undesirable strip shapes are corrected to the flat shape. Thus paper is concerned with a simulation of the tension levelling process based on the analysis of tile unit model for the tension leveller. Analysis technique such as the sequential analysis of the unit model is suggested and verified with the assembly analysis of the unit model for the effective arts economic analysis of the full set of the tension leveller. Analysis of the full tension levelling Process using sequential unit models Is carried out for steel strips with the shape defect and provides the effect of the intermesh and optimum amount of the intermesh in tension levelling process.

• 한국항공우주학회지
• /
• 제34권5호
• /
• pp.88-92
• /
• 2006

과학기술위성 2호 사용되는 구동기인 반작용 휠(Reaction Wheel Assembly, RWA)과 위성 시스템을 연결해주는 인터페이스를 담당하는 Reaction Wheel Assembly Interface Unit(RIU)의 Proto Flight Model의 개발이 완료되고 동작시험을 마쳤다. RIU는 RWA에 공급되는 전원을 켜고 끄는 스위치와 명령을 주고 받는 위성탑재 컴퓨터(OBC)의 통신 회선을 선택하는 멀티플렉서, 그리고 RWA에 연결되는 물리적 통신라인으로 구성된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.201-204
• /
• 2001

The tension levelling process is performed to elongate the strip plastically in combination of tensile and bending strain so that all longitudinal fibers in the strip have an approximately equal amount of length and undesirable strip shapes are corrected to the flat shape. This paper is concerned with a simulation of the tension levelling process based on the analysis of the unit model for the tension leveller. Analysis technique such as the sequential analysis of the nit model is suggested and verified with the assembly analysis of the unit model for the effective and economic analysis of the full set of the tension leveller. Analysis of the full tension levelling process using sequential unit models is carried out and provides the effect of the intermesh and optimum amount of the intermesh in tension levelling process.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제6권2호
• /
• pp.151-161
• /
• 2006

This article is concerned with cost analysis model in periodic maintenance policy. The repair policy is differently applied according as unit importance during an item being used and unit restoration during an item being failed. So in this paper the repair policy with minimal repair is considered as follow : as the occurrence of failure between minimal repair and periodic interval time, unit is replaced by a spare unit until the periodic maintenance time arrived. Then total expected cost per unit time is calculated according to scale parameter of failure distribution in a view of customer's. The total expected costs are included repair and usage cost : operating, fixed, minimal repair, periodic maintenance and spare unit cost. Numerical example is shown in which failure time of item has Erlang distribution.

• 한국디지털건축인테리어학회논문집
• /
• 제13권1호
• /
• pp.23-31
• /
• 2013

This paper presents computer graphics applying the traditional Korean house(Hanok) style interior to unit-care space of Welfare Facility and proposes the possibility as interior design and construction materials. In this paper, the proposed computer graphic-based model is a single-story building that provides convenient traffic between rooms. Computer graphic-based model is presented by Auto CAD, 3D program (Sketch-UP v.8), rendering program (Podium v.2) based on the traditional Korean house and related work of unit-care welfare facility. Computer graphic-based model that combined unit-care and the traditional Korean house has the following characteristics. In each room of living space, wallpaper and flooring Korean paper(Hnaji) is considered and windows, door, furniture of traditional pattern were placed. The living room(Daechung) that is representative of the traditional Korean house and the corridor (toenmaru) are the elements to save the image of the traditional Korean house as much as possible. Especially, the corridor (toenmaru) is placed to conveniently use in nursing-care facility and home-care support facility. A public space is placed around the inside court (An-madang), while the living space (unit-care) has a sense of independence by separation. Bathroom and kitchen have a modern design for functionality than aesthetic elements.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 추계학술대회 논문집
• /
• pp.177-181
• /
• 1992

For this study, a new hydraulic control unit which designed in compact compared to the currently manufactured hydraulic control unit for ABS has been introduced and its experimental model has been made. Based on the basic principle as ABS using braking force characteristics against slip ratio of tire, half car model bench tester were designed and made to make an analysis of braking effect of the new hydraulic control unit. Experiment for slip ratio characteristics of tire has been carried out using half car model bench tester and with the results of this experiment and control experiment of the new hyraulic control unit, the experiment result of the characteristics of tire and control experiment were compared to find out their correspondence. And furthermore, slip ratio characteristics of the new hydraulic control unit has been studied based on the experiment result of slip ratio characteristics of tire through simulation and compared with experiment result.

• Journal of the Korean Statistical Society
• /
• 제24권2호
• /
• pp.481-493
• /
• 1995

An ARIMA signal observed with measurement error is shown to have another ARIMA representation with nonlinear restrictions on parameters. For this model, the restricted Newton-Raphson estimator(RNRE) of the unit root is shown to have the same limiting distribution as the ordinary least squares estimator of the unit root in an AR(1) model tabulated by Dickey and Fuller (1979). The RNRE of parameters of the ARIMA(p,1,k) process and unit root tests base on the RNRE are developed.

• Communications for Statistical Applications and Methods
• /
• 제12권3호
• /
• pp.797-805
• /
• 2005

Multivariate unit root tests for the VAR(p) model have been commonly used in time series analysis. Several unit root tests were developed and recently Shin(2004) suggested a cointegration test based on weighted symmetric estimator. In this paper, we suggest a multivariate unit root test statistic based on the weighted symmetric estimator. Using a small simulation study, we compare the powers of the new test statistic with the statistics suggested in Shin(2004) and Fuller(1996).

• Communications for Statistical Applications and Methods
• /
• 제11권2호
• /
• pp.323-327
• /
• 2004

In this paper, we investigate the limiting distribution of the Ljung-Box test statistic in the unit root AR models with ARCH errors. We show that the limiting distribution is approximately chi-square distribution with the degrees of freedom only depending on the number of autocorrelation lags appearing in the test. Some simulation results are provided for illustration.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2003년도 춘계 학술발표회 논문집
• /
• pp.183-189
• /
• 2003

A momentum threshold autoregressive (MTAR) model, a nonlinear autoregressive model, is analyzed in a Bayesian framework. Parameter estimation in the presence of missing data is done by using Markov chain Monte Carlo methods. We also propose simple Bayesian test procedures for asymmetry and unit roots. The proposed method is applied to a set of Korea unemployment rate data and reveals evidence for asymmetry and a unit root.