• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.1
• /
• pp.87-99
• /
• 1993

Many studies have been reported on the successful replacement of missing teeth with osseointegrated dental Implants. However, little research has been carried out on the bio-mechanical aspect of the stress on the surrounding bone of the free-standing type of dental implant prostheses. This experimental study was aimed to analyze the stress distribution pattern on the supporting tissues depending upon the position of osseointegrated implants supporting fixed bridges. In the cases of unilateral partially edentulous mandible (the 2nd premolar and the 1st and 2nd molars missing), two osseointegrated implants were placed at the 2nd premolar and 2nd molar sites (Model A) , the 1st and 2nd molar sites (Model B, Anterior cantilevered type), the 2nd premolar and 1st molar sites (Model C, Posterior cantilevered type). Chewing forces of dentate patients and denture wearer were applied vertically on the 2nd premolar, the 1st molar, and the 2nd molar of each model. A 3-Unit fixed partial denture was constructed at each model and cantilevered extension parts were involved in Model B and Model C. Two dimensional finite element analysis was undertaken. The commercial software (Super SAP) for IBM 16 bit personal computer was utilized. The results were as follows : 1. The magnitude of applied load influenced on the total value of stresses, but did not in-fluence on the pattern of stress distribution. 2. The magnitude of stress developed from the supporting tissues were in order of Model C,Model A,Model B. 3. High stresses were concentrated on the cervical and apical portion of the implant/bone interface. 4. A difference of the stress magnitude on the implant/bone interface between mesial and distal implant was most prominant in Model C and in order of Model A and Model B. 5. The stresses developed in Model A were evenly distributed throughout both implants. 6. The stresses concentrated on the cervical portion of cantilevered side were higher in the posterior cantilevered type than in the anterior cantilevered type.

• Journal of Energy Engineering
• /
• v.18 no.3
• /
• pp.191-202
• /
• 2009

South Korea, ranks 10th largest emitter of carbon dioxide in the world, will probably be under the obligation to reduce GHG emission from 2013. It is very important to reduce the electrical energy consumption since 30% of GHG emission in South Korea is made during electricity generation. In this study, based on "the 1st national energy master plan", the GHG emission reduction potential and the feasibility of the scenario in the electricity generation have been analyzed using LEAP(Long-range Energy Alternative Planning system). The scenario of the mater plan contains the 41% expansion of nuclear power plant facilities and the 11% diffusion of renewable energy until 2030. In result, total $CO_2$ emission reduction rate is 28.8% in 2030. Also $CO_2$ emission of unit electricity generation of bituminous coal power plant is $0.85kgCO_2/kWh$ and its LNG power plant is $0.51kgCO_2/kWh$ in BAU scenario. Therefore when existing facilities is exchanged for nuclear or renewable energy power plant, substitute of bituminous power plant is more effective than LNG power.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.59-70
• /
• 2010

More than 10 different cases of airline overrun accidents happened annually home and abroad in recent years. So the government put the guidelines to protect that kinds of accidents, which is named 'Runway End Safety Area'. However, the great part of airports are far from the standards, because most of the airports have been built before the guidelines. Moreover, in many cases natural obstacles, ambiance, and local area developments obstruct the extension of the runway to meet the criteria. For these reasons, the Federal Aviation Administration (FAA) recommends that the aviation fields construct 'Aircraft Rapid Arresting System(ARAS)' at the end of the runway. Many airdromes have been constructing the system and some airports have already completed the construction. In this research, our team performed a basic study about low strength perlite concrete to provide the proper material with 'ARAS'. As a result, the unit weight of the low strength perlite concrete was $4.5{\sim}6.4kN/m^3$ and uniaxial compressive strength was measured in the range of $400{\sim}1,470kN/m^2$. In addition, we tested penetration compressive strength by using CBR tester, and we observed that the strength was increased after around 60% of penetration rate. Also, 40% of penetration rate was measured through the penetration test with dump trucks.

• The Korean Journal of Mycology
• /
• v.27 no.2 s.89
• /
• pp.132-137
• /
• 1999

This study was carried out to develop the molecular marker for the detection of Pseudomonas tolaasii, a causative agent of bacterial brown blotch disease of oyster mushroom (Pleurotus ostreatus). When several primers designed from repetitive sequences and pectin lyase genes of bacteria were used to produce DNA polymorphism from different Pseudomonas spp. isolated from edible mushrooms, PEU1 primer derived from pectin lyase gene produced polymorphic bands differentiating P. tolaasii strains from other Pseudomonas species. Two bands, 1.0kb and 0.4kb, found commonly in 6 isolates of P. tolaasii were cloned into pGEM-T vector which were designated as pPTOP1 and pPTOP2, respectively, to use as probe. The 0.4 kb insert of pPTOP2 hybridized to only 6 isolates of P. tolaasii, but did not to the other Pseudomonas species. As few as $1.5{\times}10^3$ colony forming unit (cfu) of P. tolaasii could be detected by dot blot hybridization with the cloned 0.4kb DNA in pPTOP2.

• Journal of KIISE:Information Networking
• /
• v.36 no.1
• /
• pp.34-42
• /
• 2009

In this paper, we propose a practical hybrid transport error control scheme to provide SVC video streaming service over error-prone IP networks. Many error control mechanisms for various video coding standards have been proposed in the literature. However, there is little research result which can be practically applicable to the multilayered coding structure of SVC(the scalable extension of H.264/AVC). We present a new hybrid transport error control scheme that efficiently combines layered Forward Error Correction(FEC) and Automatic Repeat Request(ARQ) for better packet-loss resilience. In the proposed hybrid error control, we adopt ACK-based ARQ instead of NACK-based ARQ to maximize throughput which is the amount of effective data packets delivered over a physical link per time unit. In order to prove the effectiveness of the proposed hybrid error control scheme, we adopt NIST-Net network emulator which is a general-purpose tool for emulating performance dynamics in IP networks. It is shown by simulations over the NIST-Net that the proposed hybrid error control scheme shows improved packet-loss resilience even with much less number of overhead packets compared to various conventional error control schemes.

• Journal of the Korean School Mathematics Society
• /
• v.3 no.1
• /
• pp.189-200
• /
• 2000

The purpose of this thesis is that the students understand the sentence stated math problems closely related to the real life and adapted the right solving strategies try to find the solution to a problem. The following research problem were proposed. 1. How repeated thinking lessons develop the understanding of problems and influence the usage of correct problem solving strategies and extensions of problem solving. 2. There are how much differences of achievement for each type of sentence stated problems by using comparative analysis of upper class, intermediate class, and lower class for each level between the experimental and comparative classes. In order to conduct this research the classes were divided into three different level - upper class, intermediate class and lower class. Each level include an experimental class and a comparative class. The two classes (experimental class and comparative class) of the same level were tested on the basis of class division record with the experimental class repeated learning papers for two weeks were used to guide the fixed thinking algorism for each sentence stated math problems. Eight common problems were chosen from a variety of textbooks : number calculation problems, velocity-distance-time problems, the density of a mixture, benefit problems, distribution problems, problems about working, ratio problems, the length of a figure problems. After conducting this research experiment The differences in achievement level between the experimental class and comparative class, were compared and analyzed through achievement tests made from the achievement test papers with seven problems, which were worth seventy points (total score). The conclusions of this thesis are as follows: Firstly, leaning activities through the usage of repeated learning papers for each level class produce an even development of achievement level especially in the case of the upper class learners, they have particular differences (between experimental class and comparative class) compared to the intermediate level and lower classes. Secondly, according to the analysis about achievement development each problems, learners easily accept the strategies of solution through the formula setting up to the problem of velocity -distance-time, and to the density of the mixture they adapted the picture drawing strategies interestingly, However each situation requires a variety of appropriate solution strategies. Teachers will have to employ other interesting solution strategies which relate to real life.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.4
• /
• pp.326-332
• /
• 2015

Greenhouse-gas emission factors are widely used to estimate emissions arising from a defined unit of a specific activity. Such estimates are used both for international reporting to the United Nations Framework Convention on Climate Change (UNFCCC) and for a myriad of national and subnational reporting purposes. The Intergovernmental Panel on Climate Change (IPCC) provides a methodology for national and sub-national estimation of known greenhouse gas emissions including $N_2O$ for each sector from which the emissions arise. The objective of this study was to develop an emission factor to estimate the direct $N_2O$ emission from an agricultural field cultivated with Chinese cabbage during spring season in 2010-2012. An estimated emission factor of $N_2O$ calculated over three years from field experiment accounting for cumulative $N_2O$ emission, nitrogen fertilization rate, and background $N_2O$ emission was $0.0056{\pm}0.00254$ (95% CI) Kg $N_2O-N/kg$ N. More extensive studies are needed to develop $N_2O$ emission factors for other upland crops in various regions of Korea because $N_2O$ emission is influenced by many factors including climate characteristics, soil properties agricultural practices and crop species.

• Asian Journal of Turfgrass Science
• /
• v.12 no.3
• /
• pp.173-182
• /
• 1998

This study was conducted to evaluate the effect of plant growth inhibitors on "Penncross" creeping bentgrass in the green of golf course for increasing the summer quality. Chlormequat chloride (C) 250$\times$, 500$\times$, 1000$\times$, daminozide (D) 50$\times$, 100$\times$, 200$\times$, paclobutralzol (P) 1000$\times$, 2000$\times$, 4000$\times$, trinexpac-ethyl (T) 1000$\times$, 2000$\times$, 4000$\times$, uniconazole (U) 25$\times$, 50$\times$, 100$\times$ with three concentrations, respectively, were applied to creeping bentgrass. The leaf length, leaf width, and internode length of stolon were inhibited by all plant growth retardants applied as compared to that of control in which D-50, T-2000, and trinexpac-ethyl were the most effective among treatments on the inhibition of leaf length and internode length of stolen, respectively. Leaf thickness increased more in the treatments of C-250, D-50. T-2000 and T-4000 than any other treatments. On the other hand, shoot density which was represented by number of leaves per unit area was found to be the highest in P-2000 and P-4000 treatment. In this case, all plant growth retardants with no significant differences showed increase of 15-20% in density as compared to control. Total dry weight increment was higher in P-2000 and P-4000 while leaf dry weight increment was higher in T-4000. and U-25 and 50 than other treatments. According to the visual evaluation for the purpose of turf quality measurement, it was found that paclo-butralzol, trinexpac-ethyl and uniconazole were not suitable for green maintenance and extension because of making leaves to yellow. In conclusion, it was postulated that C-250, D-50, and T-4000 had possibility to use practically in the green area of golf course.lf course.

• Journal of Korean Physical Therapy Science
• /
• v.7 no.1
• /
• pp.377-396
• /
• 2000

After warming-up exercise for 20 minutes, Isokinetic measurement of trunk strength for flexor and extensor was done by using Cybex 6000 TEF Unit on 91 healthy male white workers from 22years old to 49 years old, and compared each other. 20 repetitions of trunk extension-flexion were done at $120^{\circ}$/sec angular velocity. After resting for 1 minutes, Four repetitions at two different angular velocities($60^{\circ}$/sec, $120^{\circ}$/sec) were done with 30 seconds of resting interval between each angular velocity. The purpose of this study is to obtain the isokinetic normative strength values for trunk extensors and flexors, and is to know the correlation between age, height, weight of subjects and data from isokinetic trunk strength measurement, and is to provide a guideline for exercise program of male white collar workers The collected data were analyzed by ANOVA, Duncan's Multiple Range Test, and Pearson correlation coefficiency in PC-SAS program. The results obtained were as follow; 1. There is significant positive-correlation with the statistic value between weight and peak torque of trunk muscles at two different angular velocities($60^{\circ}$/sec, $120^{\circ}$/sec)(p<01), between height and peak torque of trunk muscles at two different angular velocities($60^{\circ}$/sec, $120^{\circ}$/sec) except peak torque of trunk flexor at $60^{\circ}$/sec(p<01). 2. There is nagitive-correlation between age and peak torque of trunk muscles at two different angular velocities($60^{\circ}$/sec, $120^{\circ}$/sec), there is significant differences with statistic value between age and peak torque of trunk extensor at $120^{\circ}$/sec(p<.01). 3. Mean peak torque and mean peak torque % by body weight of trunk extensor is 1.1 times higher values than trunk flexor at $60^{\circ}$/sec. 4. There is the increase in peak torque angle of trunk flexor with increasing of age, and the decrease in peak torque angle of trunk flexor with increasing of age at two different angular velocities($60^{\circ}$/sec, $120^{\circ}$/sec). there is significant differences with statistic value in peak torque angle of trunk flexor at $120^{\circ}$/sec(p<.01). 5. There is significant decrease in endurance ratio of trunk extensor with increasing of age at $120^{\circ}$/sec(p<.01). In conclusion, peak torque of trunk extensor is 1.1 times higher values than trunk flexor in healthy male white collar workers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.78-84
• /
• 2017

Because the 'Internet of Things' and sensor network technology have become a new generation industry competitiveness with a development of Information Communication Technology, each local autonomous entity is trying to adopt a Smart City quickly. This requires an integrated platform inside of a smart city operation center. Established Smart City platform provides various services using CCTV information and ITS transportation information based on a two-dimensional map. The provision of advanced Smart City services will necessitate three-dimensional map information, building and facilities unit information, linked information with public data portal for service to the public. In this paper, the authors reviewed development trends of Smart City integrated platform and proposed mashup methods between BIM/GIS interoperability platform and external open data. BIM/GIS platform can provide spatial information services for indoor and outdoor seamlessly because it was developed based on GIS spatial data with BIM data. The linked external open data are V-World data, Seoul Open Data, and Architectural Data Open. Finally, the authors proposed the direction of development for BIM/GIS integrated platform to provide advanced Smart City services.