• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.3
• /
• pp.125-132
• /
• 2007

The purpose of present paper is to investigate a fracture characteristics of the finite-width single-edge-notch(SEN) carbon fiber/epoxy reinforced plastics(CFRP) plates by using an acoustic emission(AE). Uni-directionally oriented 10 plies CFRPs specimen which had different notch length were prepared for monotonic tensile test. Matrix cracking appeared over whole testing process and fiber breaking appeared later on mainly Load distribution factor of the matrix confirmed that increased according as increases of plate width ratio. The amplitude distribution of AE signal from a specimens is an aid to the determination of the different fracture mechanism such as matrix cracking, disbonding, interfacial delamination, fiber pull-out, fiber breaking, and etc. In the result of AE amplitude distribution analysis, matrix cracking, fiber disbonding or interfacial delamination, and fiber pull-out or fiber breaking signal correspond to <65dB, <75dB, and <90dB respectively, Also, changes of the slope of cumulative AE energy represented crazing phenomena or degradation of materials.

• 한국HCI학회:학술대회논문집
• /
• 2007.02b
• /
• pp.504-511
• /
• 2007

Webcasting which is the integration of broadcasting and communications, is a prominent service which has changed to involve bi-directional interactions between a user and a system from uni-directional communication. However almost webcasting are operating by uni-direction between living and recording currently so learners have to hear and watch a contents without their suggestion. Therefore learners can not get interaction and feedback that it may be obtain on face to face class, instructor can not ensure concentration and location of student in webcasting. This paper presents a design and development of the webcasting system based on real-time interaction which provides an environment of real-time communication between casting and learner, a fixing of students' location in order to raise a fidelity and a concentration.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1578-1581
• /
• 2002

In this paper, the accuracy of the direction-of-arrival (DOA) estimation of signal impinged on the uniform linear array (ULA) is investigated. The conventional beamformer and Capon’s beamformer categorized in beamformaing techniques as well as MUSIC (MUlti-pie Signal Classification) and ESPRIT (Estimation of Signal Invariance Techniques) categorized in subspace- based methods are employed to estimate the DOAs. From the simulation result under uncorrelated environment, MUSIC can prominently distinguish the DOAs while the beamforming techniques cannot demonstrate the DOAs as clear as MUSIC does. Moreover, Uni-tary ESPRIT is employed to estimate the DOAs under uncorrelated signal conditions. By means of Uni-tary ESPRIT, the estimation has more accuracy with the computational-time reduction. In addition, it incorporates forward-backward averaging; thus Unitary ES-PRIT can overcome the problem of the coherent signal condition.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.7
• /
• pp.692-700
• /
• 2012

Vibration intensity has been used to localize vibration source of a vibrating system. Not only that, vibration intensity has also been used for structural diagnostic in identifying crack and mounted stiffeners. To clearly identify the location of vibration source and understand the changes of energy transmission path, clear flow visualization is required. Most of previous works used vectors to indicate the magnitude and direction of emerging vibration energy and transmission paths. However, due to the large surface area of a plate like-structure, clear transmission paths cannot be achieved using vector visualization. This becomes an issue when detail vector flow at all locations of the whole plate surface is required. In this study, streamlines visualization is used to clearly indicate the power flow transmission path at all plate surface. By using streamlines representation, not only clear transmission paths are obtained, but also improves the vector visualization which helps us to understand the changes of the energy flow especially for stiffened plates. In this study, vibration intensity computation is firstly compared to previous work to validate the vibration intensity computation. To clearly show the power flow transmission paths, streamlines representation is shown. This representation overcomes the unclear vector direction especially for stiffened plates. Different pattern of energy transmission path can be observed using streamlines representation for stiffened and unstiffened plate. The complex streamlines pattern can also be observed at high resonance frequencies which is unclear by using vector representation.

• Journal of Plant Biotechnology
• /
• v.7 no.1
• /
• pp.51-55
• /
• 2005

Many cloning vectors in which cDNAs can be inserted to the sense orientation have been developed. Uni-ZAP XR vector (Stratagene) should contain clones that are oriented to sense direction with respect to T3 RNA polymerase primer. Unexpectedly, large portions of cDNAs in Chinese cabbage cDNA library showed unusual insertions, antisense orientation and a hybrid of two different clones. Using two clones, 4H03 and 53-B10, derived from different cDNA libraries, we proposed and demonstrated the possibility of unusual-construct formation by in vitro translation and northern blot analysis. The 4H03 clone was inserted with inverse direction, and its transcript and translation product could be produced by T7 RNA polymerase, indicating that this clone is definitely inserted into inverse orientation. The 53-B10 that contains two independent genes was turned out to be a hybrid in which two genes are inserted to opposite direction each other. All unusual constructs might be due to the presence of small fragments of DNA, like adapter. However, the mechanism underlined the formation of unusual constructs is still remain to be solved.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.1
• /
• pp.26-35
• /
• 2012

Until now, study on the hydraulic resistance characteristics of the ground at the river and the ocean current has been focused on the behavior under uni-directional flow without the direction change of flow. However, recent research result shows that scour rate which were measured under the bi-directional flow was much higher than those measured under uni-directional flow for both fine grained and coarse soil. Since the direction of inflow and return flow at the shore, where the structure will be constructed, is not always $180^{\circ}$, effect of the incidence angle on the hydraulic resistance capacity of the ground should be examined. Using the improved EFA which can consider the direction change of flow, hydraulic resistance capacities of the artificially composed clayey fine grained soil and clayey sandy soil under $0^{\circ}$, $90^{\circ}$, $135^{\circ}$, $180^{\circ}$ flow angle of incidence were assessed. Test result shows that hydraulic resistance capacity decreases and scour rate increase with the increase of the incidence angle between inflow and return flow. For the low consolidation pressure condition, hydraulic resistance capacity of the fine grained soil decreases rapidly. While the hydraulic resistance capacity of the coarse grained soil decreases more rapidly than fine grained soil under high consolidation pressure. Eventually since the larger the incidence angle between inflow and return flow, the larger the scour rate. Hydraulic resistance capacity under bi-directional flow($0^{\circ}{\longleftrightarrow}180^{\circ}$) should be examined for the design purpose.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.125-128
• /
• 2005

The dispersion of carbon nanofiber (CNF) was carried out by solution blending, mechanical mixing, and sonication. CNFs at levels of 5-50% fiber weight content were mixed with polypropylene (PP) powder, and then were melt-mixed using a twin-screw extruder. For the further alignment of fibers, extruded rods were stacked uni-directionally in the mold cavity for the compression molding. For the evaluation of mechanical properties of nanocomposites, tension, in-plane shear, and flexural tests were conducted. CNF/PP composites clearly showed reinforcing effect in the longitudinal direction. The tensile modulus and strength have improved by 100% and 40%, respectively for 50 % fiber weight content, and the flexural modulus and strength have increased by 120% and 25%, respectively for the same fiber weight content. The shear modulus showed 65% increase, but the strength dropped sharply by 40%. However, the property enhancement was not significant due to the poor adhesion between fiber and matrix. In the transverse direction, the tensile, flexural, and shear strength decreased as more fibers were added.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.7 s.166
• /
• pp.1173-1181
• /
• 1999

In X-ray stress measurements for uni-directionally deformed surfaces such as grinding, a strongly curved $sin^2{\Psi} diagram, so called $\Psi-splitter, has been observed recently. It has been known that this is caused by the residual shear stress induced in the deformed layer by external forces. In this case it is necessary to consider this enough for ceramics and composite materials with tri-axial stress analysis. However, sufficient studies have not been done about the tri-axial stress analysis of the macro stress and micro. stress on each phase of the composite materials. The result of obtaining is as follows. 1. $\Psi-splitter does not appear in the vertical direction though $\Psi-splitter appears in grinding direction in WC-Co cemented carbides. The reversal of $\Psi-splitter to each phase does not appear. 2. $\Psi-splitter caused in WC-Co cemented carbides has a close relation in dislocation which accumulates in WC phase and phase transformation caused in Co phase. 3. The residual stress on the surface of grinding of each phase is in the state of the compression stress.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.2
• /
• pp.56-60
• /
• 2010

Since the forming process involves the strain rate effect, a yield function considering the strain rate is indispensible to predict the accurate final blank shape in the forming simulation. One of the most widely used in the forming analysis is the Hill48 quadratic yield function due to its simplicity and low computing cost. In this paper, static and dynamic uni-axial tensile tests according to the loading direction have been carried out in order to measure the yield stress and the r-value. Based on the measured results, the Hill48 yield loci have been constructed, and their performance to describe the plastic anisotropy has been quantitatively evaluated. The Hill48 quadratic yield function has been modified using convex combination in order to achieve accurate approximation of anisotropy at the rolling and transverse direction.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2004.11a
• /
• pp.299-302
• /
• 2004

본 논문은 OCP(Open Core Protocol)에 호환되는 파이프라인 구조를 가진 시스템 버스와 MPEG 시스템에 적합한 메모리 버스를 갖는 계층 구조를 가지는 새로운 동기 세그먼트 버스를 제안한다. 이 구조는 MPEG 시스템의 모바일 제품에 사용되는 영상 데이터 처리를 위한 메모리 인터페이스에 기반을 둔 버스 구조와 Multi-master와 Multi-slave를 사용하여 고성능의 다중 처리를 위한 양방향 다중 버스 구조(bi-direction multiple bus architecture)를 가진다. 효율적인 데이터 처리를 위하여 파이프라인 stage와 결합된 Master와 Slave의 주소번지가 latency를 결정하며, 시스템의 특성에 따라서 IP 코어를 배치하였다. 제안된 버스는 저 전력 구현을 위하여 세그먼트 버스 구조를 가지고, 멀티미디어 SoC 시스템의 성능 저하 없이 다중 작업이 가능한 구조를 갖는다. Wirability를 고려하여 양방향 구조를 채택하였고, Testablility를 위하여 단방향(uni-direction) 구조와 대체 가능하다. 또한, Local arbiter의 수정만으로 Master의 추가가 가능한 확장 구조를 가진다. Latency를 줄이기 위하여 직접 제어 방식과 단순한 구조의 Central arbiter로 구현되었다.