• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1688-1695
• /
• 2016

Underwater communication has multipath error because of reflection by sea-level and sea-bottom. The multipath of underwater channel causes signal distortion and error floor. The excessive multipath encountered in underwater communication channel creates inter symbol interference, which is a limiting factor to achieve a high data rate and bit error rate performance. Therefore, to increase throughput efficiency and improve performance, this paper consider FTN (Faster-than-Nyquist) signalling based on turbo equalization. FTN signalling is a technique of transmitting information at a rate higher than the allowed Nyquist limit. This paper presented efficient decoder structure of FTN transmission in the environment of multipath underwater channel and we compare the performance between FTN method and conventional punctured method in lake experimentation. As a results of lake experiment, we confirmed FTN method based on turbo equalization is applicable and efficiency in underwater communication.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.1
• /
• pp.202-211
• /
• 2001

This paper deals with an analysis of multipath which affect a transmission performance in underwater acoustic channel. Underwater acoustic channel with multipath structure is introduced to mathematical modelling for a basin environment. In this paper, SMR(Signal to Multipath Ratio) which is defined as a parameter of multipath's effect is presented as a mathematical equation, and the equation of SMR is simulated by MATLAB program. Furthermore, this paper is also dealt with an implementation of modulation and demodulation system for acoustic transmission. Acoustic Transmission is limited by frequency bandwidth, so $\pi/4 QPSK$(Quadrature Phase Shift Keying) methods which is very useful at frequency ]imitation and FM(Frequency Modulation) are used at acoustic communication system. This implemented hybrid modulation/demodulation system is used as an analog board of image transmission system. In this system, adaptive equalization for reducing the multipath effect and baseline JPEG used for an image compressing are also stated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.419-425
• /
• 2000

This paper deals with an analysis of multipath which affect a transmission performance in underwater acoustic channel. Underwater acoustic channel with multipath structure is introduced to mathematical modelling for a basin environment. In this paper, SMR(Signal to Multipath Ratio) which is defined as a parameter of multipath's effect is presented as a mathematical equation, and the equation of SMR is simulated by MATLAB program. Furthermore, this paper is also dealt with an implementation of modulation and demodulation system for acoustic transmission Acoustic Transmission is limited by frequency bandwidth so $\pi$/4 Quadrature Phase Shift Keying) methods which is very useful at frequency limitation and FM(Frequency Modulation) are used at acoustic communication system. This implemented hybrid modulation/demodulation system is used as an analog board of image transmission system

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.8
• /
• pp.454-461
• /
• 2005

Time spread due to the multipath in underwater acoustic channel, induces ISI (Inter-Symbol Interference) which degrades the performance of the underwater acoustic communication system. The passive phase conjugation (PPC) which improves the signal to multipath interference ratio (SMR) and therefore reduces the frequency selectivity. is a diversity communication technique giving a less ISI under multipath fading channel. Its frequency selectivity depends on the number of receiver array sensors and time varying source to receiver range. In this study, frequency selectivity of the PPC and its effects on bit error of underwater acoustic communication is analyzed by numerical simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2397-2404
• /
• 2012

Underwater acoustic communication has multipath error because of reflection by sea-level and sea-bottom. The multipath of underwater channel causes signal distortion and error floor. In order to improve the performance, it is necessary to employ an iterative coding scheme. Among the iterative coding scheme, turbo codes and LDPC codes are dominant channel coding schemes in recent. This paper concluded that turbo coding scheme is optimal for underwater communications system in aspect to performance, coded word length, and equalizer combining. Also, decision directed phase recovery was used for correcting phase offset induced by multipath. Based on these algorithms, we confirmed the performance in the environment of oceanic experimentation.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3
• /
• pp.154-162
• /
• 2008

Signals in an underwater channel get distorted by multipath propagation. In this paper, pre-coding method is suggested which helps comprehending the signals with minimum equalization. The signals are transformed based on the knowledge of the impulse response of the channel. Proposed pre-coding method is tested by simulations based on the ray theory and through water tank experiments. In weak multipath environment, in case of an SNR of about 20 dB, BER is $10^{-3}{\sim}10^{-4}$, while in strong multipath environment, similar BER is achieved with SNR of about 30 dB. In order for the pre-coding method to be used for underwater vehicles, channel prediction method utilizing the waveguide invariant is suggested and tested.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.110-113
• /
• 2004

Underwater acoustic(UWA) communication is one of the most difficult field because of several factors such as multipath propagation, high temporal and spatial variability of channel conditions. Therefore, it is important to model and analyze the characteristics of underwater acoustic channel such as multipath propagation, transmission loss, reverberation, and ambient noise. In this paper, UWA communication channel is modeled with a ray tracing method and applied to image transmission. Quadrature phase shift keying(QPSK) and multichannel decision feedback equalizer(DFE) are utilized as phase-coherent modulation method and equalization technique, respectively. The objective is to improve the performance of vertical sensor array than that of single sensor in the viewpoint of bit error rate(BER), constellation output, and received image quality.

• International Journal of Computer Science & Network Security
• /
• v.23 no.1
• /
• pp.96-102
• /
• 2023

In this paper, we proposed Channel Transfer Function estimation based on Delay and Doppler Profile for underwater acoustic OFDM communication system. It improved the estimation accuracy of the channel transfer function by linear time interpolation the change of Scattered Pilot (SP) insertion frequency in the time direction and the time by Delay and Doppler profile that analyzes the multipath situation of the channel investigated the performance of interpolation by simulation and report it. Previous works is inserted SP every 4 OFDM. It was effective under the environment without multipath, but it has observed that the effect of CTF compensation has been lowered in multipath channel condition. In addition to be better when inserted SP every 2 OFDM. But the amount of sending data will be decrease. Therefore, we conducted research to improve 4 OFDM with new interpolator. A computer simulation was performed as a comparison of SP inserted every 4 OFDM, SP inserted every 2 OFDM, and 4 OFDM with new interpolator. the performance of the proposed system is overwhelmingly improved, and the performance is slightly improved even 64 QAM.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.3E
• /
• pp.97-103
• /
• 2007

We propose a combined STBC (Space Time Block Coding) and AMC (Adaptive Modulation and Coding) in the underwater multipath communication channel. Performance of UAC (underwater acoustic communication) in shallow water is degraded by complicated multipath and reverberation. For this reason, and considering the variability of the ocean channel, we combined STBC and AMC techniques, which are the spatial diversity in a multi-sensor communication system. BER (Bit error rate) of combined STBC and AMC is improved by 5dB when we compare with the BER of a single sensor based system. The proposed system shows a 3dB improvement when we compare it with the BER of the single sensor based system applying the AMC technique only.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.436-442
• /
• 2022

In this paper, the performance of the selective combining according to the channel selection decision method of frequency diversity is evaluated in the underwater frequency selective channel. The underwater acoustic channel in the shallow sea has a complex multipath characteristic by combining various environmental factors such as boundary surface reflection and sound wave refraction according to the water temperature layer. In particular, frequency selectivity due to multipath causes energy fluctuation in a communication channel, which reduces SNR (Signal to Noise Ratio) and deteriorates communication performance. In this paper, we applied the frequency diversity technique using multiple channels to secure the communication performance according to the frequency selectivity by multipath. For each channel, 4-FSK (Frequency Shift Keying) and selective combining were applied, the performance was evaluated by applying the maximum value, average value, and majority decision of the signal in order to decide the demodulation channel selection of the selective combining.