• 한국멀티미디어학회논문지
• /
• 제13권11호
• /
• pp.1657-1666
• /
• 2010

수중 센서 네트워크(UWSN: Underwater Wireless Sensor Networks)는 수중 센서 노드들의 에너지 자원의 제약이 심하고, 제한된 통신 대역폭과 다양한 전파지연 등의 환경적인 특성 때문에 효율적이고 안정적인 데이터전송 방법이 요구된다. 본 논문에서는 수중 센서 네트워크의 센서 노드들이 해양 바닥에 고정된 2차원 구조(2D: two-dimensional underwater wireless sensor network model)에서 이상적인 셀 크기의 육각 모자이크 구조를 이용한 향상된 하이브리드 전송 방법을 설명하고, 또한 센서 노드를 해양 바닥의 닻에 매달아 움직임이 가능한 3차원 구조(3D: three-dimensional underwater wireless sensor network model)에서 효과적인 데이터전송을 위한 에너지 효율적인 인식 및 통신범위를 확장하는 방법을 제안한다. 2D 및 3D 구조에서 제안된 방법들은 시뮬레이션 결과에 의해 기존의 전송 방법보다 높은 에너지 효율성을 가지는 것이 확인되었다.

• 제어로봇시스템학회논문지
• /
• 제19권8호
• /
• pp.694-701
• /
• 2013

This paper deals with the problem of accurately tracking a single target moving through UWSNs (Underwater Wireless Sensor Networks) by employing underwater acoustic sensors. This paper addresses the issues of estimating the states of the target, and improving energy efficiency by applying a Kalman filter in a distributed architecture. Each underwater wireless sensor nodes composing the UWSNs is battery-powered, so the energy conservation problem is a critical issue. This paper provides an algorithm which increases the energy efficiency of each sensor node through WuS (Waked-up/Sleeping) and VM (Valid Measurement) selecting schemes. Simulation results illustrate the performance of the distributed tracking filter.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권2호
• /
• pp.504-527
• /
• 2015

Underwater wireless sensor networks (UWSNs) are similar to the terrestrial sensor networks. Nevertheless, there are different characteristics among them such as low battery power, limited bandwidth and high variable propagation delay. One of the common major problems in UWSNs is determining an efficient and reliable routing between the source node and the destination node. Therefore, researchers tend to design efficient protocols with consideration of the different characteristics of underwater communication. Furthermore, many routing protocols have been proposed and these protocols may be classified as location-based and location-free routing protocols. Pressure-based routing protocols are a subcategory of the location-free routing protocols. This paper focuses on reviewing the pressure-based routing protocols that may further be classified into non-void avoidance protocols and void avoidance protocols. Moreover, non-void avoidance protocols have been classified into single factor based and multi factor based routing protocols. Finally, this paper provides a comparison between these protocols based on their features, performance and simulation parameters and the paper concludes with some future works on which further study can be conducted.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권5호
• /
• pp.1390-1411
• /
• 2024

Underwater Wireless Sensors Networks (UWSNs) are deployed in remotely monitored environment such as water level monitoring, ocean current identification, oil detection, habitat monitoring and numerous military applications. Providing scalable and efficient routing is very challenging in UWSNs due to the harsh underwater environment. The biggest difficulties are the nodes inherent movement due to water current, long delay in data transmission, low bandwidth of the acoustic signal, high error rate and energy scarcity in battery powered nodes. Many routing protocols have been proposed to solve the aforementioned problems. There are three broad categories of routing protocols namely depth based, energy based and vector-based routing. Vector Based Forwarding protocols perform routing through virtual pipeline by defining their radius which give proper direction to packets communication. We proposed a routing protocol termed as Path-Oriented Energy Scaled Expanded Vector Based Forwarding (PESEVBF). PESEVBF takes into account all parameters; holding time, the source nodes packets routing path and void holes creation on the second hop; PESEVBF not only considers the packet upward advancement but also focus on density of the forwarded nodes in terms of number of potential forwarding and suppressed nodes for path selection. Node selection in resultant holding time is based on minimum Path Factor (PF) value. Moreover, the suppressed node will be selected for packet forwarding to avoid the void holes occurrences on the second hop. Performance of PESEVBF is compared with other routing protocols using matrices such as energy consumption, packet delivery ratio, packets dropping ratio and duplicate packets creation indicating considerable performance improvement.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.63-64
• /
• 2007

The Underwater Wireless Sensor Networks (UWSN) consists of sensor nodes equipped with limited sensing coverages, energy resources and communication capacity. Hence, the deployment and movement algorithm is a key issue that needs to be organized in order to improve the sensing efficiency of the networks. In this paper, we use a Queen problem and Knapsack problem to prevent the reiteration phenomenon of sensors, to guarantee improvement sensing coverage and efficiency in the 3D UWSN.

• 한국해양공학회지
• /
• 제31권2호
• /
• pp.170-176
• /
• 2017

In this paper, we propose an underwater localization scheme through the fusion of an inertial navigation system (INS) and the received signal strength (RSS) of electromagnetic (EM) wave sensors to guarantee precise localization performance with high sampling rates. In this localization scheme, the INS predicts the pose of the unmanned underwater vehicle (UUV) by dead reckoning at every step, and the RF sensors corrects the UUV position functions using the Earth-fixed reference when the UUV is located in underwater wireless sensor networks (UWSN). The localization scheme and state modeling were conducted in the extended Kalman filter framework, and UUV localization experiments were conducted in a basin environment. The scheme achieved reliable localization accuracy during long-term navigation, demonstrating the feasibility of exploiting EM wave attenuation as Earth-fixed reference sensors.

• 한국통신학회논문지
• /
• 제34권6A호
• /
• pp.437-444
• /
• 2009

최근 해양개발 및 재난 재해 방지 시스템에 대한 관심이 높아지면서 수중 센서네트워크 관련 연구가 시작되고 있으며, 다수의 노드 간 효율적인 통신을 위해 고속, 저가의 수중 통신 모뎀의 필요성이 증대되고 있다. 본 논문에서는 저가의 초음파 센서를 이용하여 수중 통신 모뎀을 설계 및 구현하였고 실내와 실외 환경에서 구현한 모뎀의 성능을 검증하였다. 실험 결과에 의하면, 개발한 모뎀은 실내의 수조에서 1.5kbps, 연못에서 2kbps로 통신이 가능하였으며 모뎀 간의 최대 통신 거리는 30m이었다. 또한, 수중 센서네트워크의 기능 구현을 고려하여 싱크노드용 모뎀과 센서노드용 모뎀들 간의 일대다 통신 실험을 수행하였다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2008년도 한국컴퓨터종합학술대회논문집 Vol.35 No.1 (A)
• /
• pp.261-262
• /
• 2008

Due to technological advances, the manufacturing of small and low cost of sensors becomes technically and economically feasible. In recent years, an increasing interest in using Wireless Sensor Network (WSN) in various applications, including large scale environment monitoring, battle field surveillance, security management and location tracking. In these applications, hundreds of sensor nodes are left to be unattended to report monitored data to users. Since sensor nodes are placed randomly and sometimes are deployed in underwater. It is impossible to replace batteries often when batteries run out. Therefore, reducing energy consumption is the most important design consideration for sensor networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권6호
• /
• pp.1706-1727
• /
• 2023

Under Water Sensor Networks (UWSN) has gained attraction among various communities for its potential applications like acoustic monitoring, 3D mapping, tsunami detection, oil spill monitoring, and target tracking. Unlike terrestrial sensor networks, it performs an acoustic mode of communication to carry out collaborative tasks. Typically, surface sink nodes are deployed for aggregating acoustic phenomena collected from the underwater sensors through the multi-hop path. In this context, UWSN is constrained by factors such as lower bandwidth, high propagation delay, and limited battery power. Also, the vulnerabilities to compromise the aquatic environment are in growing numbers. The paper proposes an Energy-Efficient standalone Intrusion Detection System (EEIDS) to entail the acoustic environment against malicious attacks and improve the network lifetime. In EEIDS, attributes such as node ID, residual energy, and depth value are verified for forwarding the data packets in a secured path and stabilizing the nodes' energy levels. Initially, for each node, three agents are modeled to perform the assigned responsibilities. For instance, ID agent verifies the node's authentication of the node, EN agent checks for the residual energy of the node, and D agent substantiates the depth value of each node. Next, the classification of normal and malevolent nodes is performed by determining the score for each node. Furthermore, the proposed system utilizes the sheep-flock heredity algorithm to validate the input attributes using the optimized probability values stored in the training dataset. This assists in finding out the best-fit motes in the UWSN. Significantly, the proposed system detects and isolates the malicious nodes with tampered credentials and nodes with lower residual energy in minimal time. The parameters such as the time taken for malicious node detection, network lifetime, energy consumption, and delivery ratio are investigated using simulation tools. Comparison results show that the proposed EEIDS outperforms the existing acoustic security systems.