• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.876-878
• /
• 2008

The galvanic corrosion of a vessel, or systems fitted to minimize the ship's corrosion such as ICCP(Impressed Current Cathodic Protection) system and sacrificial anodes, can lead to significant electrical current flow in the sea. The presence of vessel's current sources associated with corrosion will give rise to detectable electric field surrounding the vessel and can put it at risk from mine threats. For this reason, it is necessary to design corrosion protection systems so that they don't only prevent a hull corrosion but also minimize the electric field signature. In this paper, we describe theoretical backgrounds of underwater electric field signature due to corrosion and corrosion protection system on naval vessels and analysis results of the electric field according to ICCP anode arrangement.

• 한국음향학회지
• /
• 제37권3호
• /
• pp.129-138
• /
• 2018

선박 통행이 잦은 항만 및 연안 주변지역은 1 kHz 이하의 저주파 대역에서 선박소음이 수중소음에 지배적으로 영향을 미친다. 본 논문에서는 선박자동식별장치(Automatic Identification System, AIS)에서 관측된 선박의 항해정보를 이용하여 수중 선박소음을 추정하는 모델링 방안을 제시한다. 선박소음 모델링을 목적으로 AIS를 이용하여 제주 남부 해역에서 활동하는 선박들의 항행정보를 관측하였고, 모델링된 선박소음의 결과 검증을 위해 실험해역에 수중청음기를 설치하여 수중소음을 측정하였다. AIS 데이터를 이용하여 선박소음준위를 모델링하여 측정된 수중소음과 비교한 결과 시간에 따른 소음준위의 변동 특성이 유사함을 확인하였고, 오차가 발생되는 원인에 대해 토의하였다. 본 연구를 통해 AIS 데이터를 이용하여 선박소음준위를 5 dB 오차 범위에서 추정이 가능함을 확인하였다.

• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.569-574
• /
• 2011

In research vessels or naval ships, airborne noise from machineries such as diesel engine is the major source of underwater noise at low speed. In this paper, effect of engine noise on underwater noise is studied by considering two paths; sound radiation from hull plate and direct airborne noise transmission through hull plate. SEA (Statistical energy analysis) is used to predict hull plate vibration induced by engine noise, where SEA model consists of only two subsystems; engine room air space and hull plate. The pressure level in water is calculated from sound radiation by plate. Engine noise transmission through hull plate is obtained by assuming plane wave propagation in air-limp plate-water system. Two effects are combined and compared to the measurement, where speaker is used as a source in engine room and sound pressure levels in engine room and water are measured. The hydrophone is located 1 m away from the hull plate. It is found below 1000 Hz, prediction overestimates underwater sound pressure level by 5 to 12 dB.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.214-215
• /
• 2005

Naval equipments are installed and used for naval vessel with different environmental conditions comparing to the commercial vessel, for example, high engine power per ship displacement size, severe vibration and shock due to high running speed and explosion from naval gun's bombardment and underwater weapons. Therefore, those equipments must be installed on shipboard with small spaces, high ambient temperature around engine room and which are required be fabricated with high resistances of vibration, shock and heat resources. But in case of commercial vessel, the performances of their recent equipments naval have been improved continuously due to the technology development of domestic shipbuilding and shipboard equipment industries, together with the related fundamental industries i.e, metal, steel and electronic industries, to an international level since 1970. With these results, it became possible to unify the specifications of shipboard equipments for the commercial and military vessels(Dual-Use). In this study, vibration and shock test standards for the commercial and military vessels will be compared and reviewed technically.

• 한국항해항만학회지
• /
• 제29권7호
• /
• pp.595-601
• /
• 2005

The IMO manoeuvrability standard was established for preventing sea accidents such as collisions and strandings due to the lack of manoeuvrability. The standard of ship manoeuvrability enforced by resolution MSC.l37(76) has been applied to vessels of 100m or more in length and all chemical tankers and gas carriers regardless of the length, which were constructed on or after 1 July 1994. The IMO manoeuvrability standard is able to be divided into three kinds as followings; (1) Turning capability standard: Estimated values in design stage are to be certified by turning circle test of the actual vessel. (2) Course keeping quality standard : Estimated values in design stage are to be certified by 10 deg. and 20 deg. zig-zag tests of the actual vessel. (3) Shortest stopping distance standard : Estimated value in design stage is to be certified by the shortest stopping distance tested by the actual vessel. In this paper, the authors verified the criteria of IMO manoeuvrability standard comparing them with the values resulted from sea trial tests of various kinds of actual vessels and examined separately the validity of all criteria of the standard.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2005년도 추계학술대회지
• /
• pp.27-33
• /
• 2005

The IMO manoeuvrability standard was established for preventing sea accidents such as collisions and strandings due to the lack of manoeuvrability. The standard of ship manoeuvrability enforced by resolution MSC.137(76) has been applied to vessels of 100m or more in length and all chemical tankers and gas carriers regardless of the length, which were constructed on or after 1 July 1994. The IMO manoeuvrability standard is able to be divided into three kinds as followings; (1) Turning capability standard: Estimated values in design stage are to be certified by turning cir치e test q the actual vessel (2) Course keeping quality standard: Estimated values in design stage are to be certified by 10 deg. and 20 deg. zig-zag tests of the actual vessel. (3) Shortest stopping distance standard: Estimated value in design stage is to be certified by the shortest stopping distance tested by the actual vessel. In this paper, the authors verified the criteria of IMO manoeuvrability standard comparing them with the values resulted from sea trial tests of various kinds q actual vessels and examined separately the validity of all criteria of the standard.

• Ocean Systems Engineering
• /
• 제3권2호
• /
• pp.137-147
• /
• 2013

Moonpools are vertical wells in a floating body used onboard many types of vessels like cable-laying vessels and offshore support vessels. Moonpool gives passage to underwater activities for different types of ships as per their mission requirements. It is observed that inside a moonpool considerable relative motions may occur, depending on shape, depth of the moonpool and on the frequency range of the waves to which the ship is exposed. The vessel responses are entirely different in zero and non-zero Froude number. Former situation is paid attention in this study as the mission requirement of the platform is to be in the particular location for long period of operation. It is well known that there are two modes of responses depending on the shape of the moonpool viz., piston mode for square shape and sloshing mode for rectangular shapes with different aspect ratios of opening like 1:1.5 and 1:2 ratios. Circular shaped moonpool is also tested for measuring the responses. The vessel moored using heavy lines are modeled and tested in the wave basin. The moored lines are provided with pre-tension and the dynamic tensions on the lines are measured. The different modes of oscillations of water column are measured using wave gauge and the vessel response at a particular situation is determined. RAOs determined for various situations provide better insight to the designer. The experiments done in the wave basin may also be compared with a software package meant for handling moored floating bodies.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.71-76
• /
• 2005

대형선박의 충돌 혹은 좌초와 같은 많은 해양사고는 선박의 조종성능 부족으로 인하여 발생되고 있다. 따라서 IMO(국제해사기구)에서는 1994년 제18회 총회에서 결의서 A.751(18)로서 선박조종성에 대한 잠정기준을 채택하였고, 이 기준은 1994년 7월 1일 이후 건조된 길이 100m 이상의 선박 또는 길이에 관계없이 모든 케미컬탱커 및 개스운반선에 대하여 적용된다. IMO 조종성기준은 크게 설계단계에서의 선회성능과 보침성능 및 최단정지성능으로 대별된다. 이 논문에서는 몇 척의 대형선박에 대한 최초 설계단계에서의 자료를 이용하여 조종성능에 관한 계산 및 시뮬레이션을 행하고, 계산된 결과를 모형실험 결과와 비교, 검토하였으며, IMO 조종성 기준의 타당성에 관하여 검토 고찰하였다.

• 한국항해항만학회지
• /
• 제29권5호
• /
• pp.365-370
• /
• 2005

대형선박의 충돌 혹은 좌초와 같은 많은 해양사고는 선박의 조종성능 부족으로 인하여 발생되고 있다. 따라서 IMO(국제해사기구)에서는 1994년 제18회 총회에서 결의서 A.751(18)로서 선박조종성에 대한 잠정기준을 채택하였고, 이 기준은 1994년 7월 1일 이후 건조된 길이100m 이상의 선박 또는 길이에 관계없이 모든 케미컬탱커 및 개스운반선에 대하여 적용된다. IMO 조종성기준은 크게 설계단계에서의 선회성능과 보침성능 및 최단정지성능으로 대별된다. 이 논문에서는 몇 척의 대형선박에 대한 최초 설계단계에서의 자료를 이용하여 조종성능에 관한 계산 및 시뮬레이션을 행하고, 계산된 결과를 모형실험 결과와 비교, 검토하였으며, IMO 조종성기준의 타당성에 관하여 검토 고찰하였다.

• 한국항해항만학회지
• /
• 제35권10호
• /
• pp.799-804
• /
• 2011

제한수역에서, 정지해 있는 선박 부근을 대형선박이 항행할 경우, 항행선박으로 인하여 정지중인 선박에 미치는 간섭력은 항로설계 및 선박조종운동의 관점에서 보았을 때 대단히 중요한 문제이다. 이 논문에서는 대형 컨테이너 선박이 정지해 있는 선박 부근을 항행할 때, 두 선박간의 횡방향 거리, 항행선박의 속력, 항행선박의 크기 및 수심과 항행선박간의 흘수비(h/d)를 변수로 하여, 항행선박으로 인하여 정지 중인 선박에 미치는 간섭 영향에 대해서 다루었다. 이 연구의 목적은 제한수역에서 항행하는 대형컨테이너 선박과 계류중인 선박간의 상호간 섭력을 수치적으로 계산하고, 계류선박에 미치는 간섭영향을 최소화할 수 있는 항행선박의 속력 및 선박간의 상호거리에 대한 검토를 행하여 항내에서의 안전조종운동에 필요한 기준을 제안하는데 있다.