• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.42-43
• /
• 2006

LTCC 후막공정에서 일반적으로 사용되고 있는 스크린 프린팅 방법은 낮은 정밀도와 100um 이하의 선폭을 구현하는 데 한계를 보이고 있다. 이에 따라서 보다 미세한 라인을 형성 할 수 있는 반도체 미세라인 공정기술을 후막 공정에 응용한 후막 리소그라피 기술 (thick-film lithography technology)이 전자부품의 소형화에 대한 방안으로 연구 되고 있다. 본 연구에서는 후막 리소그라피 기술에 사용되는 감광성 Silver 페이스트에 영향을 미치는 각기 다른 크기와 형상의 Silver 파우더들과 인쇄 후 표면의 roughness 개선을 위한 여러 종류의 첨가제들을 첨가하여 최적의 조성을 연구 하였으며, 그린시트와 페이스트의 매칭성을 해결하기 위해서 Tg가 다른 글라스 파우더를 첨가하였다. 또한 전면 인쇄 한 후에 건조, 노광, 현상, 적층, 소성 과정을 걸치는 후막 리소그라피 기술을 이용하여 소성 후 20um이하의 선폭을 가지는 내장형 패턴 구현하였으며 투과엑스레이와 O/S 테스트 통하여 우수한 특성을 확인 할 수 있었다.

• 전자공학회논문지 IE
• /
• v.47 no.2
• /
• pp.13-20
• /
• 2010

This paper describes a current mode PWM DC-DC converter IC for battery charger and supply power converter for portable electronic devices. The maximum supply voltage of IC is 40[V] and 2.8[V]~330[V] DC input power is converted to higher or programmed DC voltage according to external resistor ratio or wire winding ratio of transformer. The maximum supply output current is 3[A] over and voltage error of output node is within 3[%]. The whole circuit needed current mode PWM DC-DC converter circuit is designed. The package dimensions and number of external parts are minimized in order to get a smaller hardware size. The power consumption is smaller then 1[mW] at stand by period with supply voltage of 3.6[V] and maximum energy conversion efficiency is about 86[%]. This device has been designed in a 0.6[um] double poly, double metal 40[V] CMOS process and whole chip size is 2100*2000 [um2].

• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.333-336
• /
• 2007

A Strained Layer Multiquantum-Well (SL-MQW) distributed feedback laser at a wavelength of 1.31 um operating from $-40^{\circ}C$ to $85^{\circ}C$ without any cooling is grown by metal-organic chemical vapor deposition (MOCVD). Lasers with high slope efficiency are achieved through careful optimization of a SL-MQW active layer, especiallyoptimizing the amount of strain, the well thickness, the barrier thickness, the number of wells, and the active layer width. In this paper, we obtain the slope efficiencies of 0.38[mW/mA] and 0.26 [mW/mA] at $25^{\circ}C$ and $85^{\circ}C$, respectively. Threshold currents are 7.1[mA] and 19.8[mA] at $25^{\circ}C$ and $85^{\circ}C$, respectively.

• Journal of IKEEE
• /
• v.14 no.3
• /
• pp.190-198
• /
• 2010

This paper describes a auto focus piezo actuator driver IC for portable digital camera. The 80[V] DC voltage is generated by a DC-DC converter and supplied to power of piezo moving control circuit. The voltage of piezo actuator needs range -20[V] to 80[V] proportional to 1[Vp-p] input control voltages. The dimensions and number of external parts are minimized in order to get a smaller hardware size. IIC(Inter-IC) interface logic is designed for data interface and it makes debugging easy, test for mass productions. The power consumption is around 40[mW] with supply voltage of 3.6[V]. This device has been fabricated in a 0.6[um] double poly, triple metal 100[V] BCD MOS process and whole chip size is 1600*1500 [$um^2$].

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.4 s.346
• /
• pp.16-22
• /
• 2006

Gigabit transimpedance amplifiers are realihzed in submicron CMOS technologies for Gigabit Ethernet applications. The regulated cascode technique is exploited to enhance the bandwidth and noise performance simultaneously so that it can isolate the large input parasitic capacitance including photodiode capacitance from the determination of the bandwidth. The 1.25Gb/s TIA implemented in a 0.6um CMOS technology shows the measured results of 58dBohm transimpedance gain, 950MHz bandwidth for a 0.5pF photodiode capacitance, 6.3pA/sqrt(Hz) average noise current spectral density, and 85mW power dissipation from a single 5V supply. In addition, a 10Gb/s TIA is realized in a 0.18um CMOS incorporating the RGC input and the inductive peaking techniques. It provides 59.4dBohm transimpedance gain, 8GHz bandwidth for a 0.25pF photodiode capacitance, 20pA/sqrt(Hz) noise current spectral density, and 14mW power consumption for a single 1.8V supply.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.23 no.3
• /
• pp.1-10
• /
• 2010

Objective : Erysipelas is an acute inflammation caused by pyogenic bacteria. This mainly involves the upper part of dermis. It begins as erythematous patches with tenderness, followed by fever, headache, chills and fatigue etc. It may results in edema, obstruction of lymphatics and sepsis. So this experiment is carried out for test whether the Bojeasodok-um subtracted Scrophulariae Radix, Lasiosphaera seu Calvatia, Isatidis Radix added indigo Naturalis, Lithospermi Radix have an anti-inflammatory effect and have suppression effect on immunocyte in the state of inflammation which induced by Erysipelas. Method : Experimental animals made use of 4-5 week-age(weight 20-25g) ICR(male) mouse. In the breeding farm, the lighting time was controlled from 7:00 am till 7:00 pm, the temperature was controlled So we concluded that BS is prospected as an anti-inflammatory agent to cure inflammation induced bywithin 18-23$23^{\circ}C$ and water and food were not limited.The freezing lyophilization powder which were extracted from Bojesodok-Um divided low dose group(200mg/kg-BSL) and high dose group(500mg/kg-BSH) and after melting in water, it was orally administered to the mouse. Compared with inflammation induced group which were induced by triggering-inflammation reagent Carageenan and Zymosan and normal contrast group, we measured the edema decrement effect,macrophage and spleen cell activation. Result : 1. BS has suppress inflammatory reaction induced by Carageenan. 2. BS has suppress increasing activation of abdominal cavity macrophage in the Carageenan and Zymosan induced inflammation. 3. BS has suppress increasing activation of spleen cell in the Carageenan and Zymosan induced inflammation. Based on the above result, BS was improved its suppression effect to the inflammatory reaction through the suppression of spleen cell and macrophage activation. So we concluded that BS is prospected as an anti-inflammatory agent to cure inflammation induced by Erysipelas.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.222-222
• /
• 2007

RF circuit을 구현하는데 있어서 기판의 전기적 특성을 정확하게 아는 것은 원하는 결과를 추출하기 위해 매우 중요하다. 본 연구에서는 현재 사용되고 있는 PI 기판의 전기적인 특성인 유효 유전율과 loss tangent 값을 T-resonator률 이용해 정확하게 측정하고자 했다. T-resonator는 microstrip 구조로 구현 되었으며 conductor material은 Cu를 사용하였다. PI 기판의 두께는 25um, Cu의 두께는 PI 기판의 종류에 따라 12um 와 18um, T-resonator line width는 50um로 구현하였다. 또한 공진 주파수에 따라 stub 길이가 다른 10개의 T-resonator를 제작하였다. PI 기판의 유효 유전율을 구하기 위해 stub 길이의 open-end effect와 T-junction effect를 고려하였으며 수식을 통해 정확한 유효 유전률을 추출하였다. 또한 PI 기판의 loss tangent 추출에 필요한 dielectric loss를 추출하기 위해 unload quality factor를 분석하였다. Unload quality factor는 dielectric loss, conductor loss, radiation loss를 구성되며 conductor loss와 radiation loss를 수식에 의해 구하고 dielectric loss를 추출 하였다. 추출 된 dielectric loss를 통해 각각의 T-resonator의 loss tangent 값을 구하였다. T-resonator를 이용한 PI 기판의 측정은 비교적 복잡한 수식에 의해 이루어지지만 정확한 data를 얻을 수 있고 다른 재료의 전기적 특성을 추출하는데 응용이 가능하다.

• Design & Manufacturing
• /
• v.17 no.3
• /
• pp.48-54
• /
• 2023

In this study, an injection mold with ultra-small surface properties was manufactured using nanosecond laser processing. A superhydrophobic characteristic analysis was performed on the PET specimen manufactured through this. To this end, a hydrophobic pattern was defined using the Cassie-Baxter model. The defined features were selected with a spot diameter of 25um and pitch spacing of 30um and 35um. As a result of the basic experiment, it was confirmed that the fine pattern shape had an aspect ratio of 1:1 when the pitch interval was 35um and 20 iterations. Through the determined processing conditions, a hydrophobic pattern was implemented on the core surface of KP4. A specimen with a hydrophobic pattern was produced through injection molding. The height of the molded hydrophobic pattern is 20 ㎛ less than the depth of the core and the contact angle measurement results are 92.1°. This is a contact angle smaller than the superhydrophobic criterion. Molding analysis was performed to analyze the cause of this, and it was analyzed that the molding was not molded due to the lack of pressure in the injection machine.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.88-91
• /
• 2007

Turnout system is a mechanical installation enabling trains to be guided from one track to another which is consists of point blades, common crossing and guard rail etc. These structural feature causes vibration, noise and damages while railroad car wheel is passes by. A tilting train is a train with a tilting mechanism that enables increased speed on regular railroad tracks. The aim of this paper is to study a characteristics of the shock-vibration and noise of tilting and existing train passes by turnout systems. To analyze and assesment, noise and vibration measurement was carried out at the Naesu-station of Chungbuk-line which equipped with cast manganese crossing and built-up crossing and Illo-station of Honam-line which equipped with cast manganese crossing.

• Transactions of the Korean hydrogen and new energy society
• /
• v.14 no.4
• /
• pp.313-320
• /
• 2003

볼밀링법을 이용하여 타이타늄 스펀지와 칩 또는 스크랩으로부터 상온애서 직접 타이타늄 수소와 분말을 재조하는 실험을 행하였다. 실험결과 진공중에서 볼링을 행한 타이타늄 스펀지와 칩의 경우 24시간외 후 합금분말의 크기는 약 20 um 정도의 크기를 갖는 것을 확인하였다. 그러나 수소화 분위기에서 볼밀링을 행한 경우에 12시간 후 수소화분말의 입도는 0.1-0.2 um로 극히 미세한 합금 분말이 제조되었다. 수소분위기에서의 볼밀링에 의한 타이타늄 분말제조는 기존의 방법에 비해 열을 가하지 않고 타이타늄 수소화분말을 얻을 수 있다는 장점과 나노크기의 미세한 수소화 분말을 얻을 수 있음을 알 수 있었다.