• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1460-1471
• /
• 2024

2D and 3D ultrasonic imaging has so far not been demonstrated in pure molten lead in the open literature. In this study the development of such an ultrasonic device for imaging is outlined and results from testing at 380 ℃ in lead are presented. The main difficulties were found to be achieving then maintaining suitable wetting while ensuring suitable durability of the device, both due to the harsh nature of molten lead and the elevated temperatures. The successful detection and imaging (2D and 3D), of differently shaped targets, where the features were above the size of the transmitted ultrasound beam was demonstrated.

• 한국통신학회논문지
• /
• 제34권6C호
• /
• pp.611-618
• /
• 2009

최근 유비쿼터스 컴퓨팅 환경에서 상황인식 서비스를 위한 핵심 기술로 실내 위치인식 기술이 주목받고 있다. 기존에 연구된 크리켓은 비중앙집중형 구조로 설계되어 사용자의 프라이버시를 보호하고, 확장, 유지관리가 용이하며, 하드웨어 비용이 저렴한 잇점이 있다. 이 논문에서는 RF와 초음파신호 사이의 TDOA에 기반한 크리켓 시스템보다 개선된 실내 측위시스템을 설계하였다. RF 메시지를 전송하기 위하여 ISM 대역인 2.4GHz 주파수를 사용하였다. 비콘에서 RF와 초음파를 전송하는 빈도(Beaconing frequency)는 채널 이용률을 높이기 위해 2배 높였다. 초음파 펄스 지속시간은 초음파 신호의 거리를 증가시키면서 최적화 시켰다. 또한 위치좌표를 계산하는 기능을 리스너에 내장시켰다. 실험결과 위치 업데이트율과 위치 정확도는 향상되었다.

• 비파괴검사학회지
• /
• 제28권6호
• /
• pp.504-511
• /
• 2008

This paper proposes an ultrasonic measurement method for measurement of linear interfacial stiffness of contacting surface between two steel plates subjected to nominal compression pressures. Interfacial stiffness was evaluated by using shear waves reflected at contact interface of two identical solid plates. Three consecutive reflection waves from solid-solid surface are captured by pulse-echo method to evaluate the state of contact interface. A non-dimensional parameter defined as the ratio of their peak-to-peak amplitudes are formulated and used to calculate the quantitative stiffness of interface. Mathematical model for 1-D wave propagation across interfaces is developed to formulate the reflection and transmission waves across the interface and to determine the interfacial stiffness. Two identical plates are fabricated and assembled to form contacting surface and to measure interfacial stiffness at different states of contact pressure by means of bolt fastening. It is found from experiment that the amplitude of interfacial stiffness is dependent on the pressure and successfully determined by employing pulse-echo ultrasonic method without measuring through-transmission waves.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권3호
• /
• pp.23-31
• /
• 2020

The performance of a downward-irradiation sonoreactor was investigated using calorimetry, KI dosimetry, luminol (Sonochemiluminescence, SCL) method, and aluminium foil erosion method as one of the basic steps for the optimal design of downward-irradiation sonoreactors. The applied frequency was 28 kHz and the input electrical power was 280 - 300 W. The liquid height, from the reactor bottom to the transducer module surface, ranged from 1λ (53.6 mm) to 2λ (107.1 mm). For various liquid heights, the magnitude of calorimetric power and the mass of cavitation-generated I₃^- ion varied significantly. It was found that the additional application of mechanical mixing resulted in higher sonochemical activity, especially in the cavitational active zone, which was induced by violent liquid flow in the reactor. In aluminium foil erosion tests, it was found that less ultrasound energy reached the bottom of the reactor due to the violent liquid flow and no significant sonophysical effect was observed for higher mixing rate conditions (100 and 200 rpm).

• International Journal of Aeronautical and Space Sciences
• /
• 제17권4호
• /
• pp.467-475
• /
• 2016

Ultrasonic propagation imaging (UPI) has shown great potential for detection of impairments in complex structures and can be used in wide range of non-destructive evaluation and structural health monitoring applications. The software implementation of such algorithms showed a tendency in time-consumption with increment in scan area because the processor shares its resources with a number of programs running at the same time. This issue was addressed by using field programmable gate arrays (FPGA) that is a dedicated processing solution and used for high speed signal processing algorithms. For this purpose, we need an independent and flexible block of logic which can be used with continuously evolvable hardware based on FPGA. In this paper, we developed an FPGA-based ultrasonic propagation imaging system, where FPGA functions for both data acquisition system and real-time ultrasonic signal processing. The developed UPI system using FPGA board provides better cost-effectiveness and resolution than digitizers, and much faster signal processing time than CPU which was tested using basic ultrasonic propagation algorithms such as ultrasonic wave propagation imaging and multi-directional adjacent wave subtraction. Finally, a comparison of results for processing time between a CPU-based UPI system and the novel FPGA-based system were presented to justify the objective of this research.

• Computers and Concrete
• /
• 제11권1호
• /
• pp.39-49
• /
• 2013

The use of ground fly ash in concrete can increase the risk of slump loss due to the drastic surface change of the particles after the grinding treatment and the accelerated reaction compared to the untreated ash. This study is aimed at the early age hydration and time-dependent rheology changes of cement paste containing ground fly ash. An original fly ash is ground into different fineness and the hydration of cement paste containing the ground fly ash is monitored with the ultrasound propagation method. The zeta potentials of the solid particles are measured and the changes of rheological parameters of the cement pastes with time are analyzed with a rheometer. A particle packing model is used to probe packing of the solid particles. The results show that the early age hydration of the paste is strongly promoted by replacing Portland cement with fly ash up to 30 percent (by mass), causing increase of the yield stress of the paste. The viscosity of a paste containing ground fly ash is lower than that containing the untreated ash, which is explained by the denser packing of the solid particles.

• Structural Engineering and Mechanics
• /
• 제74권5호
• /
• pp.671-678
• /
• 2020

In this work, the dynamic properties of a high performance concrete containing glass powder (GP) was studied. The GP is a new cementitious material obtained by recycling waste glass presenting pozzolanic activity. This eco-friendly material was incorporated in concrete mixes by replacing 20 and 30% of cement. The mechanical properties of building materials highly affect the response of the structure under dynamic actions. First, the resonant vibration frequencies were measured on concrete plate with free boundary conditions after 14, 28 and 90 curing days by using an alternative vibration monitoring technique. This technique measures the average frequencies of several excitations done at different points of the plate. This approach takes into account the heterogeneity of a material like concrete. So, the results should be more precise and reliable. For measuring the bending and torsion resonant frequencies, as well as the damping ratio. The dynamic properties of material such as dynamic elastic modulus and dynamic shear modulus were determined by modelling the plate on the finite element software ANSYS. Also, the instantaneous aroused frequency method and ultrasound method were used to determine the dynamic elastic modulus for comparison purpose, with the results obtained from vibration monitoring technique.

• Journal of the Korean Wood Science and Technology
• /
• 제33권5호통권133호
• /
• pp.29-37
• /
• 2005

A previous study verified that the SIRT (simultaneous iterative reconstruction technique) method is more efficient than the back-projection method as a CT algorithm for wood. However, it was expected that the determination of the initial model function of the SIRT method would influence the quality of CT image. Therefore, in this study, we intended to develop a technique that could be used to determine an adequate initial model function. For this purpose, we proposed several techniques, and for each technique we examined the effects of the initial model function on the average errors and the CT image at each iteration. Through this study, it was shown that the average error was decreased and the image quality was improved using the proposed techniques. This tendency was most pronounced when the back-projection method was used to determine the initial model function. From the results of this study, we drew the following conclusions: 1) The initial model function of the SIRT method should be determined with careful attention, and 2) the back-projection method efficiently determines the initial model function of the SIRT method.

• 대한통합의학회지
• /
• 제1권2호
• /
• pp.67-80
• /
• 2013

Purpose : This study was to investigate effects of closed kinetic chain and open kinetic chain exercise on the lumbar stabilizarion. Methods : A total of 30 healthy over 20 years old college students(men = 14, women = 16) who were participated in this. We selected randomly people of CKC, OKC, and control group. For the past four weeks, CKC and OKC group worked out 3 times per week and then we compared within group and between groups on muscle width. Results : 1. The width of internal oblique, transverse abdominis, and multifidus were all significantly increased after four weeks exercise in the CKC group(P<.05). 2. The width of internal oblique, transverse abdominis, and multifidus were all increased after four weeks exercise in the OKC group but transverse abdominis musule only showed significant difference. 3. Difference values between pre-exercise and post-exercise of transverse abdominis and multifidus in the CKC group was significantly high and difference among the groups were significant. Conclusion : Accordingly, lumbar stabilizing exercise was more effective to increase a width of abdominal deep muscles through CKC exercise.

• 재활복지공학회논문지
• /
• 제9권3호
• /
• pp.215-222
• /
• 2015

본 연구의 목적은 변형된 교각운동이 건강한 성인의 복부 국소근육의 활성화에 미치는 효과를 조사하기 위함이다. 본 연구에 17명의 대상자가 참석하였다. 일반적 교각운동과 변형된 교각운동에서 외복사근, 내복사근, 복횡근, 복직근을 각각 측정하였다. 근육들의 변화를 확인하기 위해 근전도와 초음파를 사용하였다. 그 결과, 변형된 교각운동 그룹이 아닌, 일반적 교각운동 그룹의 비우세발에서 복직근과 외복사근의 활성도에 유의한 차이가 있었다. 그리고 변형된 교각운동 그룹에서는 일반적인 교각운동 그룹 보다 비우 세발에서 내복사근과 복횡근의 근두께 변화에서 유의한 차이가 있었다. 따라서 변형된 교각운동은 대근육보다 국소근육을 활성화 시키는데 더 효과적인 운동이라 생각된다.