CT Image Reconstruction of Wood Using Ultrasound Velocities II - Determination of the Initial Model Function of the SIRT Method -

  • Kim, Kwang-Mo (Major in Environmental Materials Science, College of Agriculture & Life Sciences, Seoul National University) ;
  • Lee, Jun-Jae (Major in Environmental Materials Science, College of Agriculture & Life Sciences, Seoul National University)
  • Received : 2005.07.21
  • Accepted : 2005.08.30
  • Published : 2005.09.25

Abstract

A previous study verified that the SIRT (simultaneous iterative reconstruction technique) method is more efficient than the back-projection method as a CT algorithm for wood. However, it was expected that the determination of the initial model function of the SIRT method would influence the quality of CT image. Therefore, in this study, we intended to develop a technique that could be used to determine an adequate initial model function. For this purpose, we proposed several techniques, and for each technique we examined the effects of the initial model function on the average errors and the CT image at each iteration. Through this study, it was shown that the average error was decreased and the image quality was improved using the proposed techniques. This tendency was most pronounced when the back-projection method was used to determine the initial model function. From the results of this study, we drew the following conclusions: 1) The initial model function of the SIRT method should be determined with careful attention, and 2) the back-projection method efficiently determines the initial model function of the SIRT method.

Keywords

References

  1. Bhandarkar, S. M., T. D. Faust, and M. Tang. 2002. Design and prototype development of a computer vision-based lumber production planning system. Image and Vision Computing. 20: 167-189 https://doi.org/10.1016/S0262-8856(01)00087-7
  2. Bucur, V. 2003. Nondestructive Characterization and Imaging of Wood, Springer, Germany. 354p
  3. Funt, B. V. and E. C. Bryant. 1987. Detection of internal log defects by automatic interpretation of computer tomography images. Forest Prod. J. 37(1): 56-62
  4. Han, W. and R. Birkeland. 1991. Log scanning through combination of ultrasonics and artificial intelligence. Proc. of the 8th International Symposium on Nondestructive Testing of Wood. Vancouver, WA. pp 163 - 187
  5. Kim, K. M. and J. J. Lee. 2005. CT image reconstruction of wood using ultrasound velocities I-Effects of reconstruction algorithms and wood characteristics. J. of the Korean Wood Science and Technology. 33(5): 21-28
  6. Lindgren, L. O. 1991. The accuracy of medical CAT-scan images for non-destructive density measurements in small volume elements within solid wood. Wood Sci. Technol. 25: 425 - 543
  7. Lo, T. and P. L. Inderwiessen. 1994. Fundamentals of Seismic Tomography. Society of Exploration Geophysicists. Geophysical Monograph Series Number 6. USA. 179p
  8. Nguyen, M. and G. Foliente. 2003. State-ofpractice & challenges in NDE of utility poles in service. Proc. of the 11th Asia-Pacific Conference on Non-destructive Testing. Jeju, Korea. pp.81
  9. Schmoldt, D. L., D. Zhu, and R. W. Conners. 1993. Nondestructive evaluation of hardwood logs using automated interpretation of CT images. Review of Progress in Quantitative Nondestructive Evaluation, Vol. 12. Plenum Press, New York
  10. Schmoldt, D. L., L. G. Occena, A. L. Abbott, and N. K. Gupta. 1999. Nondestructive evaluation of hardwood logs: CT scanning, machine vision and data utilization. Test. Eval. 15: 279-309 https://doi.org/10.1080/10589759908952876
  11. Taylor, F. W., Jr. F. G. Wagner, C. W. McMillin, I. L. Morgan, and F. F. Hopkins. 1984. Locating knots by industrial tomography-A feasibility study. Forest Prod. J. 34(5): 42-46
  12. Wagner, F. G., F. W. Taylor, D. S. Ladd, C. W. McMillin, and F. L. Roder. 1989. Ultrafast CT scanning of an oak log for internal defects. Forest Prod. J. 39(11/12): 62 - 64