Journal of the Korean Wood Science and Technology

The Korean Society of Wood Science & Technology (한국목재공학회)
권호 표지

Study on the Power Consumption Characteristics of Korean Domestic Species in Peripheral Milling with Image Analysis Technique

  • Lee, Hyoung Woo (Inst. of Agri. Sci. & Tech., College of Agriculture, Chonnam Nat'l Uni.) ;
  • Kim, Byung Nam (Inst. of Agri. Sci. & Tech., College of Agriculture, Chonnam Nat'l Uni.) ;
  • Kim, Kyung Yong (Inst. of Agri. Sci. & Tech., College of Agriculture, Chonnam Nat'l Uni.)
  • Received : 2005.04.29
  • Accepted : 2005.05.24
  • Published : 2005.09.25
Download PDF
⟨ Previous Next ⟩

Abstract

Peripheral milling is one of the most important wood machining processes in wood industry. Power consumption characteristics of twelve Korean domestic species in peripheral milling were investigated in this study. Image analysis technique was applied to extract proper data from the power consumption profiles. Average power consumption increased as cutting depth increased and specific cutting power decreased as cutting depth increased. However, no significant relationship could be found between density and power consumption and between cutting depth and surface roughness.

Keywords

Acknowledgement

Supported by : Korean Research Foundation

References

  1. Davis, E. M. and H. Nelson. 1954. Machining tests of wood with the molder. Journal of FPRS, October: 237-245
  2. Koch, P. 1964. Wood Machining Process. The Ronald Press Company, New York
  3. Medic, M. and M. Fajdiga. 1996. Measurement of specific cutting force in reference with inclined cutter heads used in wood planing. Holz als Roh - und Werkstoff 54: 27 - 35 https://doi.org/10.1007/s001070050127
  4. Naderi, N. and R. E. Hernandez. 1999. Effect of planing on physical and mechanical properties of sugar maple wood. Wood and Fiber Science 31(3): 283 - 292
  5. Riegel, A. 1997. Subsurface characteristics related to the process conditions during cutting-State of technology and possible measuring methods. Holz als Roh- und Werkstoff 55: 111 - 117 https://doi.org/10.1007/BF02990527
  6. Stewart, H. A. 1974. A comparison of factors affecting power for abrasive and knife planing of hardwoods. Forest Products Journal 24(3): 31-34
  7. 日本木材學會. 2001. 木質科學實驗マニュアル. 文永堂出版