• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.744-747
• /
• 2001

This paper shows shear wave behavior of CFRP composite laminates as a polar grid form to evaluate vibration pattern of ultrasonic transducers, which gives measured modelling fundamental contents of nondestructive evaluation. Polarized direction can be obtained by using a c-scanner and sensitivity of transducers is founded when using through-transmission method of two transducers. And modelling of vector decomposition is presented based on ply-to-ply method to apply practicable nondestructive evaluation of CFRP laminate lay up. This modelling decomposes the transmission of linearly polarized wave into orthogonal components through each ply of a laminate. It is found that a high provable shows between the model and experimental developed in characterizing layup of CFRP composite laminates.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.121-124
• /
• 2003

This paper shows shear wave behavior of CFRP(carton fiber reinforced plastics) composite laminates as a polar grid form to evaluate vibration pattern of ultrasonic transducers, which gives measured modelling fundamental contents of nondestructive evaluation. This modelling decomposes the transmission of a linearly polarized wave into orthogonal components through each ply of a laminate. It is found that a high probability shows between the model and measurement system in characterizing lay up of CFRP composite laminates. Also evaluating quantitatively the defects in CFRP laminates who found to be possible of normalized frequency obtained from 2D-FFT technique based on C-scan method. Thus, the technique is proven to be one of the useful means to evaluate any internal defect in CFRP composite laminates.

• 비파괴검사학회지
• /
• 제32권2호
• /
• pp.185-191
• /
• 2012

일반적으로 위상배열 초음파검사 기법을 이용한 배관 용접부검사에서는 높은 검사 각도를 효과적으로 발생하기 위하여 ��지를 사용하게 된다. 그러나 용접부 또는 접근이 제한된 부위에 대한 검사는 위상 배열 초음파 탐촉자에 ��지를 부착하게 되면 ��지의 전단 길이로 인하여 검사체적을 포함하지 못하는 등의 문제점이 발생하게 된다. 따라서 ��지를 사용하지 않고 높은 검사 각도를 발생할 수 있는 횡파 위상배열 초음파 탐촉자를 적용해야 할 필요성이 있다. 본 연구에서는 굴절각도가 높은 횡파를 발생할 수 있는 위상배열 초음파 탐촉자를 설계하고 제작하여 다양한 깊이의 EDM 노치가 가공된 시험편에서 결함이 정확하게 검출되고 평가될 수 있는 지를 확인하였다. 결과적으로 본 연구에서 설계된 횡파 위상배열 초음파 탐촉자는 다양한 깊이의 결함을 검출하고 신뢰성 있는 정밀도를 나타내었으므로 향후 접근제한이 예상되는 발전설비 구조물의 검사에 적용된다면 효과적인 검사 결과를 보여줄 것으로 기대된다.

• 비파괴검사학회지
• /
• 제35권6호
• /
• pp.407-413
• /
• 2015

Ultrasonic infrared thermography is an active thermography methods. In this method, mechanical energy is introduced to a structure, it is converted into heat energy at the defects, and an infrared camera detects the heat for inspection. The heat generation mechanisms are dependent on many factors such as structure characteristics, defect type, excitation method and contact condition, which make it difficult to predict heat distribution in ultrasonic infrared thermography. In this paper, a method to simulate frictional heating, known to be one of the main heat generation mechanisms at the closed defects in metal structures, is proposed for ultrasonic infrared thermography. This method uses linear vibration analysis results without considering the contact boundary condition at the defect so that it is intuitive and simple to implement. Its advantages and disadvantages are also discussed. The simulation results show good agreement with the modal analysis and experiment result.

• 한국음향학회지
• /
• 제43권3호
• /
• pp.335-343
• /
• 2024

본 논문은 초음파 방사힘을 이용하여 음향파워를 측정하는 방법에 대한 이론적 모델을 세우고 이에 대한 이론적 결과를 다루었다. 이를 위해 Kirchhoff approximation 기반으로 강체원뿔표적에 대한 산란모델을 세우고 음향파워를 계산한 후 이를 방사힘으로 환산하였다. 이를 통해 원뿔표적을 사용하는 기존 방법의 정확성 및 측정 한계, 그리고 임의의 경사각의 원뿔표적으로도 측정할 수 있는 음향파워측정에 관한 확장된 이론을 제시하였다. 이를 이용하여 초음파 방사힘을 이용한 음향파워측정 방법의 주파수 및 표적 크기에 대한 의존도도 본 논문에서 제시하였다. 그 결과로 주파수 및 표적 크기를 고려하였을 때 국제표준규격(International Electrotechnical Commission, IEC)에서 제시하는 방법으로 계산한 음향파워값에 추가되어야 할 보정값을 산출하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.160-165
• /
• 1993

The cutting mechanism of ultrasonic vibration machining is characterized as two phases, that is an impact at the cutting edge and a reduction of cutting force due to non-contact interval between tool and workpiece. In this paper, in order to identfy cutting dynamics of a system with ultrasonically vibrated cutting tool, an ARMA modelling is performed on experimental cutting force signals which have a dominant effect on cutting dynamics. The aim of this study is, through Dynamic Data System methodology, to find the inherent characteristics of an ultrasonic vibration cutting process by considering natural frequencyand damping coefficient. Surface roughness and stability of cutting process under ultrasonic vibration are also considered

• Computers and Concrete
• /
• 제3권6호
• /
• pp.423-437
• /
• 2006

Stress wave propagation through concrete is simulated by finite element analysis. The concrete medium is modeled as a homogeneous material with smeared properties to investigate and establish the suitable finite element analysis method (explicit versus implicit) and analysis parameters (element size, and solution time increment) also suitable for rigorous investigation. In the next step, finite element analysis model of the medium is developed using a digital image processing technique, which distinguishes the mortar and aggregate phases of concrete. The mortar and aggregate phase topologies are, then, directly mapped to the finite element mesh to form a heterogeneous concrete model. The heterogeneous concrete model is then used to simulate wave propagation. The veracity of the model is demonstrated by evaluating the intrinsic parameters of nondestructive ultrasonic pulse velocity testing of concrete. Quantitative relationships between aggregate size and testing frequency for nondestructive testing are presented.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.146-153
• /
• 2003

Ultrasonic inspection of defects has been focused on the existence of defect in structural material and need has much time and expenses in inspecting all the coordinates (x, y) on material surface. Neural networks can have an application to coordinates (x, y) of defects by multi-point inspection method. Ultrasonic inspection modeling is optimized by neural networks Neural networks has trained training example of absolute and relative coordinate of defects, and defect pattern. This method can predict coordinates (x, y) of defects within engineering estimated mean error $\psi$.

• 한국압력기기공학회 논문집
• /
• 제9권1호
• /
• pp.8-14
• /
• 2013

Steam turbine blades and discs of nuclear power plants are one of the most highly stressed areas of turbine rotor, and periodic inspection of the blade roots is essential for monitoring integrity and preventing turbine failure. Ultrasonic technique is applied for volumetric inspection of blade root. However, the complexity of blade root geometry imposes challenges to inspection of blades and discs. Recently, phased array ultrasonic inspection technology is being applied to numerous power generation inspection applications including turbine rotor. The phased array ultrasonic technique requires customized inspection wedges which are generally necessary to generate effectively higher incident angle. But the usage of this wedge can cause access limitation for the lower stage blades of turbine because of the wedge front length. Therefore, the shear wave phased array probe which can generate high inspection angle without wedge is essentially necessary. In this study, feasibility study is conducted for the shear wave phased array ultrasonic probe application to blade and disc inspection. As results, the experimental results show that the shear wave phased array probe can detect the flaw and measure its size with reliable accuracy. Therefore if this shear wave phased array probe is applied to field inspection of blade and disc, more reliable inspection is expected for turbine having access limitation.

• 비파괴검사학회지
• /
• 제28권3호
• /
• pp.245-253
• /
• 2008

A precise description of the material is a key point to obtain reliable results when using wave propagation codes. In the case of multipass welds, the material is very difficult to describe due to its anisotropic and heterogeneous properties. Two main advances are presented in the following. The first advance is a model which describes the anisotropy resulting from the metal solidification and thus the model reproduces an anisotropy that is correlated with the grain orientation. The model is called MINA for modelling anisotropy from Notebook of Arc welding. With this kind of material model1ing a good description of the behaviour of the wave propagation is obtained, such as beam deviation or even beam division. But another advance is also necessary to have a good amplitude prediction: a good quantification of the attenuation, particularly due to grain scattering, is also required as far as attenuation exhibits a strong anisotropic behaviour too. Measurement of attenuation is difficult to achieve in anisotropic materials. An experimental approach has been based both on the decomposition of experimental beams into plane waves angular spectra and on the propagation modelling through the anisotropic material via transmission coefficients computed in generally triclinic case. Various examples of results are showed and also some prospects to continue refining numerical simulation of wave propagation.