• Korean Journal of Microbiology
• /
• v.3 no.2
• /
• pp.9-14
• /
• 1965

The enzyme-producing potentials of industrially important strains of Aspergillus spp. were studied. Irradiation of three original isolates of Aspergillus oryzae to ultra-violet rays resulted in the production of mutants which differed from the parent riboflavin and vitamin $B_{12}$ in culture media. 1. Irradition three strains of Aspergillus oryzae to ultraviolet light produced mutants and two strains of them were selected for soy sauce brewing. 2. The two strains are the physiological mutants of Aspergillus oryzae. Both were found to have superior enzyme activity to their relatives. 3. Aspergillus oryzae UV-induced mutant 172-722 and 569-713 were more powerful than others in the production of riboflavin and vitamin $B_{12}$. The enzyme activity of these strain were high and decreased only slightly even in 20 percent solution of NaCl. 4. Aspergillus oryzae UV-induced mutant 172-722 had more powerful protease producibility in wheat bran media than in modified Czapek's solution. On the contrary, Aspergillus oryzae UV-induced mutant 569-713 had more powerful producibility of saccharogenic and dextrinogenic amylase in modified Czapek's solution than in mold bran. 5. Aspergillus oryzae UV-induced mutant 172-722 formed the spore rapidly and Aspergillus oryzae UV-induced mutant 569-713 did ordinarily. 6. It is found from the results that Aspergillus oryzae UV-induced mutant 172-722 is valuable material for the manufacture of soy sauce because of its high protease activity in 20 percent solution of NaCl. Aspergillus oryzae UV-induced mutant 569-713 is suitable for soy bean mash and for fermented red pepper sauce for its high saccharogenic and dextrinogenic amylase activity in 20 percent solution of sodium chloride.

• Elastomers and Composites
• /
• v.33 no.3
• /
• pp.159-167
• /
• 1998

Rubber products are aged like human complexion by the attack of oxygen, ultra violet, ozone, etc.. Aging is very important and also very complicated phenomenon to understand. This may explain the rarity of papers on this subject. In this study, we tried to understand the aging behavior of EPDM compared to that of natural rubber. We also compared the sulfur vulcanized system to the peroxide vulcanized one. In our experiment, the peroxide vulcanizates were more advantageous in aging than the sulfur vulcanizates. The authors belived that this study about the high performance EPDM would be applicable to rubber industry.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.495-496
• /
• 2008

This paper describes the influence of Ultra-violet irradiation on time to tracking resistance of epoxy insulating materials by use of the inclined plane test. And, the influence of surface degradation was evaluated through several method such as measurement of contact angle, surface roughness, using a scanning electron microscopy. As the 1000 hours of the surface degradation with UV-CON, the flashover time decreases at different rates depending on epoxy resin and silicone rubber specimen. As the duration of the surface degradation with UV-CON is prolonged, the contact angle of epoxy resin decreases at the rate of degradation time, while that of silicone rubber was not exchanged. It is assumed that this phenomenon is related to the decrease in hydrophobicity of the surface of the materials. Also, as to epoxy resin, the decrease of hydrophobicity due to surface degradation with UV-CON is greater than that resulting from surface degradation with WOM. The UV radiation produced chalking and crazing on the surface of the insulating materials specimen.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.5
• /
• pp.442-449
• /
• 2006

Electrical, optical, and structural properties of indium zinc oxide (IZO) films grown by a box cathode sputtering (BCS) were investigated as a function of oxygen flow ratio. A sheet resistance of $42.6{\Omega}/{\Box}$, average transmittance above 88% in visible range, and root mean spare roughness of $2.7{\AA}$ were obtained even in the IZO layers grown at room temperature. In addition, it is shown that electrical characteristics of the top-emitting organic light emitting diodes (TOLEDs) with the BCS grown-IZO top cathode layer is better than that of TOLEDs with DC sputter grown IZO top cathode, due to absence of plasma damage effect. Furthermore the effects of oxygen flow ratio in IZO films are investigated, based on x-ray photoelectron spectroscopy (XPS), ultra violet/visible (UV/VIS) spectro-meter, scanning electron microscopy (SEM), and atomic force microscopy (AFM) analysis results.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.952-958
• /
• 2009

The International Maritime Organization (IMO) has adopted the ballast water management convention at a diplomatic conference in early 2004 that all ships should be equipped with a treatment system from 2010 gradually. In this paper, the disinfection characteristic of ultra-violet (UV) rays was studied and a ballast water treatment system (BWTS) which can treat $50m^3$/h sea water was manufactured. The system consists of a disinfection chamber with six 3.5 kW UV lamps which are operated by magnetic ballasts, a programmable logic controller (PLC) and set of pipe lines. The biological disinfection efficacy of the prototype BWTS was evaluated following the IMO rules using zooplankton such as Artemia and Rotifer species for the size over $50{\mu}m$, and phytoplankton such as Tetraselmis and Thalassiosira species for the size between 10 to $50{\mu}m$. From the experimental results, the disinfection efficacy was 99.99 % that meets the IMO requirement. However, more studies on an energy saving system are needed because the consumption power of the prototype system is as high as over 21 kWh for $50m^3$/h.

• Journal of The Korean Astronomical Society
• /
• v.34 no.2
• /
• pp.59-66
• /
• 2001

In this paper, we investigate the correlation between the radial ultraviolet color distribution and the shapes of the ultraviolet isophote for elliptical galaxies (M32, NGC 1399) and spiral bulges (of M31, M81) by using their archival UIT images. For M31, M81, and NGC 1399, the radial ultraviolet color distributions show a two-component trend; as the distance from the galactic center increase the color becomes redder in the inner region while it becomes bluer in the outer region. On the other hand, the color of M32 continues to become bluer with the increasing galactocentric distance. We also find, unlike the optical/IR images, significant variations of the position angle and the ellipticity in the ultraviolet isophotes of M31, M81, and NGC 1399 through the inner regions. For M32, the variation is significant in the outer region. Since these variation implies the triaxiality of their intrinsic shapes, we suggest that the early-type galaxies and spiral bulges with a radial color gradient in ultraviolet tend to have a triaxiality. On the other hand, the shape parameter characterized by the fourth order cosine Fourier coefficient of the isophote, a(4)/a, indicates that the systematic deviations of the ultraviolet isophotes of the four galaxies are smaller than $\~0.2\%$ in units of the semi-major axis. The latter result implies that the ultraviolet isophotes of the galaxies have a pure elliptical shape rather than the boxy or disky shapes. Therefore, there is no clear evidence of correlation between the radial ultra-violet color gradient and the boxy/disky shapes of isophotes.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.443-445
• /
• 2015

We provide results of near-infrared (NIR) spectroscopic observations of 83 nearby (0.002< z <0.48) and bright (K <14 mag) type 1 active galactic nuclei (AGNs). For the observations, we used the Infrared Camera (IRC) on AKARI allowing us to obtain the spectrum in the rarely studied spectral range of $2.5-5.0{\mu}m$. The $2.5-5.0{\mu}m$ spectral region suffers less dust extinction than ultra violet (UV) or optical wavelength ranges, and contains several important emission lines such as $Br{\beta}$ ($2.63{\mu}m$), $Br{\alpha}$ ($4.05{\mu}m$), and polycyclic aromatic hydrocarbon (PAH; $3.3{\mu}m$). The sample is selected from the bright quasar surveys of Palomar Green and SNUQSO, and AGNs with black hole (BH) masses estimated from reverberation mapping method. We measure the Brackett line properties for 11 AGNs, which enable us to derive BH mass estimators and investigate circum-nuclear environments. Moreover, we perform spectral modeling to fit the hot and warm dust components by adding photometric data from SDSS, 2MASS, WISE, and ISO to the AKARI spectra, and estimate hot and warm dust temperatures of ~1100K and ~220 K, respectively.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.83-90
• /
• 2002

This paper describes the development of scientific payload system onboard the KSR-III. The ozone detector(UVR), Langmuir electron probe(LEP), airglow photometer(AGP), and magnetometer(MAG) constitute this system. The purpose of the ozone detector is to measure the ozone density profile and the LEP measures the electron density and temperature in the ionosphere over the Korean Peninsula. The AGP detects airglow in the mesosphere over the Korean Peninsular. The MAG provides rocket attitude and the magnetic fluctuation information during the flight. With the developed payloads, the ground calibration tests and the environmental tests have been performed.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.82-89
• /
• 1989

The fluorescence of $Eu^{3+},\;Tb^{3+}$ substituted for $La^{3+}$ in Lanthanum Oxychloride (LaOCl) has been studied. The fluorescence intensity of the $Eu^{3+},\;Tb^{3+}$ in LaOCl excited by Ultra-violet light were investigated on its activator concentration and discussed as the energy transfer process. The energy transfer from $Tb^{3+}\;to\;Eu^{3+}$ take place in the $Eu^{3+}\;and\;Tb^{3+}$ codoped LaOCl crystal. This process was confirmed to the change of concentration and the measurement of fluorescence decay time.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.12
• /
• pp.509-514
• /
• 2016

From the point of view to prevent airborne infection-related diseases such as H1N1, SARS, and MERS, an actual application of air cleaning and purification systems including technologies like UVGI has become increasingly important. Recently, an air purification system using REME (Reflective Electro Magnetic Energy) developed in the U.S. is applied for indoor air purification and sterilization technology to counteract the outbreak of new airborne infections. In this study, an air sterilization performance experiment using REME was carried out. The results verified that air sterilization performance in the case of installing a REME system in a medical center was 31%, namely the number of floating bacteria decreased by 31% after only a five-day operation. In addition, the number of culture collections in the REME operating air conditioning systems using nonpathogenic Geobacillus stearothemophilus as a biological indicator decreased maximally to 67%. A field application of REME technology will be useful to prevent airborne infection-related diseases, especially in response to public health crises due to the advent of emerging diseases.